欢迎访问《轻工机械》稿件在线采编系统!设为首页 | 加入收藏    
信息公告:  
文章检索:
稿件处理系统
期刊信息
  • 中国标准连:ISSN1005-2895
  • 续出版物号: CN 33-1180/TH
  • 主管单位:轻工业杭州机电设计研究院有限公司
  • 主办单位:轻工业杭州机电设计研究院有限公司、中国轻工机械协会、中国轻工业机械总公司
  • 社  长:刘安江
  • 主  编:黄丽珍
  • 地  址:杭州市余杭区高教路970号西溪联合科技广场4-711
  • 电子邮件:qgjxzz@126.com
理事单位          MORE>>
陈铎文,蔡卓剑,吴 敏,赵荣祥,杨欢.基与Maxwell与Simplorer的三相异步电机绕组调速系统仿真[J].轻工机械,2017,35(2):53-57
基与Maxwell与Simplorer的三相异步电机绕组调速系统仿真
Simulation Research on Three-phase Induction Motor Winding Change-over Speed Regulation Systems Based on Maxwell and Simplorer
  
DOI:10.3969/j.issn.1005-2895.2017.02.011
中文关键词:  三相异步电机  变绕组  间接矢量控制  联合仿真  M axwell软件  Simplorer软件
英文关键词:three-phase induction motor  winding change-over  indirect vector control  co-simulation  Maxwell software  Simplorer software
基金项目:高等学校博士学科点专项科研基金博导类自主课题(201201叭110113)
作者单位
陈铎文,蔡卓剑,吴 敏,赵荣祥,杨欢 浙江大学电气工程学院浙江杭州310027 
摘要点击次数: 1581
全文下载次数: 2121
中文摘要:
      针对电动汽车电机驱动系统的宽调速范围要求,分析一种通过改变定子绕组等效匝数来拓宽三相异步电机调速 范围的方法,由于采用该调速方法在绕组切换过程中会引起电机参数突变,目前还缺乏有效的暂态过程分析手段,无法 应对可能的电流冲击、转矩波动甚至功率器件损毁等情况。本文基于场路耦合仿真的解决思路,重点讨论如何使用 M axwell与Simplorer软件工具对绕组切换的暂态过程进行联合仿真,解决其中9抽头电机建模、端部参数提取以及控制 环路设计等问题。研究表明联合仿真结果准确,可以作为有效分析的手段。
英文摘要:
      ln terms of the wide speed range requirement of the traction system of EV( electric vehicle) , it introduced a method to expand the speed range of a three-phase asynchronous motor via changing the equivalent turns of stator windings. Using the method caused sudden changes of motor parameters during winding change-over, thus there's been no mature method to analyze the transient, or to estimate potential consequences as current surge , torque disturbance or even breakdown of power devices. It based on the field-circuit coupling simulation mainly discusses the way to run Maxwell and Simplorer co-simulation for winding change-over transient analysis dealing with 9-lead motor modeling , end- winding parameter extracting and control loop design. The result displays accurate and proves to be an effective way for analysis.
查看全文  查看/发表评论  下载PDF阅读器
关闭