Fitting via alternative random-effect models

When there are two alternative random-effect models leading to the same marginal model, inferences from one model can be used for the other model. We illustrate how a likelihood method for fitting models with independent random effects can be applied to seemingly very different models with correlated random effects. We also discuss some merits of using these alternative models.     

EXPONENTIAL SMOOTHING AND NON‐NEGATIVE DATA

The most common forecasting methods in business are based on exponential smoothing, and the most common time series in business are inherently non‐negative. Therefore it is of interest to consider the properties of the potential stochastic models underlying exponential smoothing when applied to non‐negative data. We explore exponential smoothing state space models for non‐negative data under various assumptions about the innovations, or error, process. We first demonstrate that prediction distributions from some commonly used state space models may have an infinite variance beyond a certain forecasting horizon. For multiplicative error models that do not have this flaw, we show that sample paths will converge almost surely to zero even when the error distribution is non‐Gaussian. We propose a new model with similar properties to exponential smoothing, but which does not have these problems, and we develop some distributional properties for our new model. We then explore the implications of our results for inference, and compare the short‐term forecasting performance of the various models using data on the weekly sales of over 300 items of costume jewelry. The main findings of the research are that the Gaussian approximation is adequate for estimation and one‐step‐ahead forecasting. However, as the forecasting horizon increases, the approximate prediction intervals become increasingly problematic. When the model is to be used for simulation purposes, a suitably specified scheme must be employed.     

Hypothesis testing in smoothing spline models

Nonparametric regression models are often used to check or suggest a parametric model. Several methods have been proposed to test the hypothesis of a parametric regression function against an alternative smoothing spline model. Some tests such as the locally most powerful (LMP) test by Cox et al. (Cox, D., Koh, E., Wahba, G. and Yandell, B. (1988). Testing the (parametric) null model hypothesis in (semiparametric) partial and generalized spline models. Ann. Stat., 16, 113–119.), the generalized maximum likelihood (GML) ratio test and the generalized cross validation (GCV) test by Wahba (Wahba, G. (1990). Spline models for observational data. CBMS-NSF Regional Conference Series in Applied Mathematics, SIAM.) were developed from the corresponding Bayesian models. Their frequentist properties have not been studied. We conduct simulations to evaluate and compare finite sample performances. Simulation results show that the performances of these tests depend on the shape of the true function. The LMP and GML tests are more powerful for low frequency functions while the GCV test is more powerful for high frequency functions. For all test statistics, distributions under the null hypothesis are complicated. Computationally intensive Monte Carlo methods can be used to calculate null distributions. We also propose approximations to these null distributions and evaluate their performances by simulations.     

On the estimation of normal copula discrete regression models using the continuous extension and simulated likelihood

The continuous extension of a discrete random variable is amongst the computational methods used for estimation of multivariate normal copula-based models with discrete margins. Its advantage is that the likelihood can be derived conveniently under the theory for copula models with continuous margins, but there has not been a clear analysis of the adequacy of this method. We investigate the asymptotic and small-sample efficiency of two variants of the method for estimating the multivariate normal copula with univariate binary, Poisson, and negative binomial regressions, and show that they lead to biased estimates for the latent correlations, and the univariate marginal parameters that are not regression coefficients. We implement a maximum simulated likelihood method, which is based on evaluating the multidimensional integrals of the likelihood with randomized quasi-Monte Carlo methods. Asymptotic and small-sample efficiency calculations show that our method is nearly as efficient as maximum likelihood for fully specified multivariate normal copula-based models. An illustrative example is given to show the use of our simulated likelihood method.     

Predicting random effects with an expanded finite population mixed model

Prediction of random effects is an important problem with expanding applications. In the simplest context, the problem corresponds to prediction of the latent value (the mean) of a realized cluster selected via two-stage sampling. Recently, Stanek and Singer [Predicting random effects from finite population clustered samples with response error. J. Amer. Statist. Assoc. 99, 119–130] developed best linear unbiased predictors (BLUP) under a finite population mixed model that outperform BLUPs from mixed models and superpopulation models. Their setup, however, does not allow for unequally sized clusters. To overcome this drawback, we consider an expanded finite population mixed model based on a larger set of random variables that span a higher dimensional space than those typically applied to such problems. We show that BLUPs for linear combinations of the realized cluster means derived under such a model have considerably smaller mean squared error (MSE) than those obtained from mixed models, superpopulation models, and finite population mixed models. We motivate our general approach by an example developed for two-stage cluster sampling and show that it faithfully captures the stochastic aspects of sampling in the problem. We also consider simulation studies to illustrate the increased accuracy of the BLUP obtained under the expanded finite population mixed model.     

Semiparametric Regression with Kernel Error Model

Abstract.  We propose and study a class of regression models, in which the mean function is specified parametrically as in the existing regression methods, but the residual distribution is modelled non-parametrically by a kernel estimator, without imposing any assumption on its distribution. This specification is different from the existing semiparametric regression models. The asymptotic properties of such likelihood and the maximum likelihood estimate (MLE) under this semiparametric model are studied. We show that under some regularity conditions, the MLE under this model is consistent (when compared with the possibly pseudo-consistency of the parameter estimation under the existing parametric regression model), is asymptotically normal with rate and efficient. The non-parametric pseudo-likelihood ratio has the Wilks property as the true likelihood ratio does. Simulated examples are presented to evaluate the accuracy of the proposed semiparametric MLE method.     

Modeling nonlinear time series with local mixtures of generalized linear models

The authors consider a novel class of nonlinear time series models based on local mixtures of regressions of exponential family models, where the covariates include functions of lags of the dependent variable. They give conditions to guarantee consistency of the maximum likelihood estimator for correctly specified models, with stationary and nonstationary predictors. They show that consistency of the maximum likelihood estimator still holds under model misspecification. They also provide probabilistic results for the proposed model when the vector of predictors contains only lags of transformations of the modeled time series. They illustrate the consistency of the maximum likelihood estimator and the probabilistic properties via Monte Carlo simulations. Finally, they present an application using real data.     

Overview of multinomial models for ordinal data

The purpose of this paper is to relate a number of multinomial models currently in use for ordinal response data in a unified manner. By studying generalized logit models, proportional generalized odds ratio models and proportional generalized hazard models under different parameterizations, we conclude that there are only four different models and they can be specified genericaUy in a uniform way. These four models all possess the same stochastic ordering property and we compare them graphically in a simple case. Data from the NHLBI TYPE II study (Brensike et al (1984)) is used to illustrate these models. We show that the BMDP programs LE and PR can be employed in computing maximum likelihood estimators for these four models.     

Analysis of repeated categorical responses from fully and partially cross-classified data

Many follow-up studies involve categorical data measured on the same individual at different times. Frequently, some of the individuals are missing one or more of the measurements. This results in a contingency table with both fully and partially cross-classified data. Two models can be used to analyze data of this type: (i) The multiple-sample model, in which all the study subjects with the same configuration of missing observations are considered a separate sample. (ii) The single-sample model, which assumes that the missing observations are the result of a mechanism causing subjects to lose the informtion from one or some of the measurements. In this work we compare the two approaches and show that under certain conditions, the two models yield the same maximum likelihood estimates of the cell probabilities in the underlying contingency table.     

Allowing for non-ignorable non-response in the analysis of voting intention data

We apply some log-linear modelling methods, which have been proposed for treating non-ignorable non-response, to some data on voting intention from the British General Election Survey. We find that, although some non-ignorable non-response models fit the data very well, they may generate implausible point estimates and predictions. Some explanation is provided for the extreme behaviour of the maximum likelihood estimates for the most parsimonious model. We conclude that point estimates for such models must be treated with great caution. To allow for the uncertainty about the non-response mechanism we explore the use of profile likelihood inference and find the likelihood surfaces to be very flat and the interval estimates to be very wide. To reduce the width of these intervals we propose constraining confidence regions to values where the parameters governing the non-response mechanism are plausible and study the effect of such constraints on inference. We find that the widths of these intervals are reduced but remain wide.     

On sequential Monte Carlo sampling methods for Bayesian filtering

In this article, we present an overview of methods for sequential simulation from posterior distributions. These methods are of particular interest in Bayesian filtering for discrete time dynamic models that are typically nonlinear and non-Gaussian. A general importance sampling framework is developed that unifies many of the methods which have been proposed over the last few decades in several different scientific disciplines. Novel extensions to the existing methods are also proposed. We show in particular how to incorporate local linearisation methods similar to those which have previously been employed in the deterministic filtering literature; these lead to very effective importance distributions. Furthermore we describe a method which uses Rao-Blackwellisation in order to take advantage of the analytic structure present in some important classes of state-space models. In a final section we develop algorithms for prediction, smoothing and evaluation of the likelihood in dynamic models.     

Nonparametric maximum likelihood estimation for shifted curves

The analysis of a sample of curves can be done by self-modelling regression methods. Within this framework we follow the ideas of nonparametric maximum likelihood estimation known from event history analysis and the counting process set-up. We derive an infinite dimensional score equation and from there we suggest an algorithm to estimate the shape function for a simple shape invariant model. The nonparametric maximum likelihood estimator that we find turns out to be a Nadaraya–Watson-like estimator, but unlike in the usual kernel smoothing situation we do not need to select a bandwidth or even a kernel function, since the score equation automatically selects the shape and the smoothing parameter for the estimation. We apply the method to a sample of electrophoretic spectra to illustrate how it works.     

Missing data mechanisms and their implications on the analysis of categorical data

We review some issues related to the implications of different missing data mechanisms on statistical inference for contingency tables and consider simulation studies to compare the results obtained under such models to those where the units with missing data are disregarded. We confirm that although, in general, analyses under the correct missing at random and missing completely at random models are more efficient even for small sample sizes, there are exceptions where they may not improve the results obtained by ignoring the partially classified data. We show that under the missing not at random (MNAR) model, estimates on the boundary of the parameter space as well as lack of identifiability of the parameters of saturated models may be associated with undesirable asymptotic properties of maximum likelihood estimators and likelihood ratio tests; even in standard cases the bias of the estimators may be low only for very large samples. We also show that the probability of a boundary solution obtained under the correct MNAR model may be large even for large samples and that, consequently, we may not always conclude that a MNAR model is misspecified because the estimate is on the boundary of the parameter space.     

变权重组合预测模型的局部加权最小二乘解法

随着科学技术的不断进步，预测方法也得到了很大的发展，常见的预测方法就有数十种之多。而组合预测是将不同的预测方法组合起来，综合利用各个方法所提供的信息，其效果往往优于单一的预测方法，故得到了广泛的应用。而基于变系数模型的思想研究了组合预测模型，将变权重的求取转化为变系数模型中系数函数的估计问题，从而可以基于局部加权最小二乘方法求解，利用交叉证实法选取光滑参数。其结果表明所提方法预测精度很高，效果优于其他方法。     

Estimation and specification testing in female labor participation models: parametric and semiparametric methods

Female labor participation models have been usually studied through probit and logit specifications. Little attention has been paid to verify the assumptions that are used in these sort of models, basically distributional assumptions and homoskedasticity. In this paper we apply semiparametirc methods in order to test the previous hypothesis. We also estimate a Spanish female labor participation model using both parametric and semiparametirc approaches. The parametirc model includes fixed and random coefficients probit specification. The estimation procedures are parametric maximum likelihood for both probit and logit models, and semiparametric quasi maximum likelihood following Klein and Spady (1993). The results depend cricially in the assumed model.     

Estimation and diagnostics for heteroscedastic nonlinear regression models based on scale mixtures of skew-normal distributions

An extension of some standard likelihood based procedures to heteroscedastic nonlinear regression models under scale mixtures of skew-normal (SMSN) distributions is developed. This novel class of models provides a useful generalization of the heteroscedastic symmetrical nonlinear regression models (Cysneiros et al., 2010), since the random term distributions cover both symmetric as well as asymmetric and heavy-tailed distributions such as skew-t, skew-slash, skew-contaminated normal, among others. A simple EM-type algorithm for iteratively computing maximum likelihood estimates of the parameters is presented and the observed information matrix is derived analytically. In order to examine the performance of the proposed methods, some simulation studies are presented to show the robust aspect of this flexible class against outlying and influential observations and that the maximum likelihood estimates based on the EM-type algorithm do provide good asymptotic properties. Furthermore, local influence measures and the one-step approximations of the estimates in the case-deletion model are obtained. Finally, an illustration of the methodology is given considering a data set previously analyzed under the homoscedastic skew-t nonlinear regression model.     

Norm restricted maximum likelihood estimators for binary regression models with parametric link

Parametric link transformation families have shown to be useful in the analysis of binary regression data since they avoid th? problem of link misspecifaction. Inference for these models are commonly based on likelihood methods. Duffy and Santner (1988, 1989) however showed that ordinary logistic maximum likelihood estimators (MLE) have poor mean square error (MSE) behavior in small samples compared to alternative norm restricted estimators. This paper extends these alternative norm restricted estimators to binary regression models with any specified parametric link family. These extended norm restricted MLE's are strongly consistent and efficient under regularity conditions. Finally a simulation study shows that an empiric version of norm restricted MLE's exhibit superior MSE behavior in small samples compared to MLE's with fixed known link.     

SIMULATED MAXIMUM LIKELIHOOD APPLIED TO NON-GAUSSIAN AND NONLINEAR MIXED EFFECTS AND STATE–SPACE MODELS

The paper presents an overview of maximum likelihood estimation using simulated likelihood, including the use of antithetic variables and evaluation of the simulation error of the resulting estimates. It gives a general purpose implementation of simulated maximum likelihood and uses it to re‐visit four models that have previously appeared in the published literature: a state–space model for count data; a nested random effects model for binomial data; a nonlinear growth model with crossed random effects; and a crossed random effects model for binary salamander‐mating data. In the case of the last three examples, this appears to be the first time that maximum likelihood fits of these models have been presented.     

ML, PL, QL in Markov Chain Models

Abstract.  In many spatial and spatial-temporal models, and more generally in models with complex dependencies, it may be too difficult to carry out full maximum-likelihood (ML) analysis. Remedies include the use of pseudo-likelihood (PL) and quasi-likelihood (QL) (also called the composite likelihood). The present paper studies the ML, PL and QL methods for general Markov chain models, partly motivated by the desire to understand the precise behaviour of the PL and QL methods in settings where this can be analysed. We present limiting normality results and compare performances in different settings. For Markov chain models, the PL and QL methods can be seen as maximum penalized likelihood methods. We find that QL is typically preferable to PL, and that it loses very little to ML, while sometimes earning in model robustness. It has also appeal and potential as a modelling tool. Our methods are illustrated for consonant-vowel transitions in poetry and for analysis of DNA sequence evolution-type models.     

Maximum likelihood from spatial random effects models via the stochastic approximation expectation maximization algorithm

We introduce a class of spatial random effects models that have Markov random fields (MRF) as latent processes. Calculating the maximum likelihood estimates of unknown parameters in SREs is extremely difficult, because the normalizing factors of MRFs and additional integrations from unobserved random effects are computationally prohibitive. We propose a stochastic approximation expectation-maximization (SAEM) algorithm to maximize the likelihood functions of spatial random effects models. The SAEM algorithm integrates recent improvements in stochastic approximation algorithms; it also includes components of the Newton-Raphson algorithm and the expectation-maximization (EM) gradient algorithm. The convergence of the SAEM algorithm is guaranteed under some mild conditions. We apply the SAEM algorithm to three examples that are representative of real-world applications: a state space model, a noisy Ising model, and segmenting magnetic resonance images (MRI) of the human brain. The SAEM algorithm gives satisfactory results in finding the maximum likelihood estimate of spatial random effects models in each of these instances.