Testing for sphericity in a two-way error components panel data model

This article is concerned with sphericity test for the two-way error components panel data model. It is found that the John statistic and the bias-corrected LM statistic recently developed by Baltagi et al. (2011 Baltagi, B. H., Feng, Q., Kao, C. (2011). Testing for sphericity in a fixed effects panel data model. Econometrics Journal 14:25–47.[Crossref], [Web of Science ®] , [Google Scholar])Baltagi et al. (2012 Baltagi, B. H., Feng, Q., Kao, C. (2012). A Lagrange multiplier test for cross-sectional dependence in a fixed effects panel data model. Journal of Econometrics 170:164–177.[Crossref], [Web of Science ®] , [Google Scholar], which are based on the within residuals, are not helpful under the present circumstances even though they are in the one-way fixed effects model. However, we prove that when the within residuals are properly transformed, the resulting residuals can serve to construct useful statistics that are similar to those of Baltagi et al. (2011 Baltagi, B. H., Feng, Q., Kao, C. (2011). Testing for sphericity in a fixed effects panel data model. Econometrics Journal 14:25–47.[Crossref], [Web of Science ®] , [Google Scholar])Baltagi et al. (2012 Baltagi, B. H., Feng, Q., Kao, C. (2012). A Lagrange multiplier test for cross-sectional dependence in a fixed effects panel data model. Journal of Econometrics 170:164–177.[Crossref], [Web of Science ®] , [Google Scholar]). Simulation results show that the newly proposed statistics perform well under the null hypothesis and several typical alternatives.     

Bayesian adaptive two-stage design for determining person-time in Phase II clinical trials with Poisson data

Adaptive clinical trial designs can often improve drug-study efficiency by utilizing data obtained during the course of the trial. We present a novel Bayesian two-stage adaptive design for Phase II clinical trials with Poisson-distributed outcomes that allows for person-observation-time adjustments for early termination due to either futility or efficacy. Our design is motivated by the adaptive trial from [9 V. Sambucini, A Bayesian predictive two-stage design for Phase II clinical trials, Stat. Med. 27 (2008), pp. 1199–1224. doi: 10.1002/sim.3021[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]], which uses binomial data. Although many frequentist and Bayesian two-stage adaptive designs for count data have been proposed in the literature, many designs do not allow for person-time adjustments after the first stage. This restriction limits flexibility in the study design. However, our proposed design allows for such flexibility by basing the second-stage person-time on the first-stage observed-count data. We demonstrate the implementation of our Bayesian predictive adaptive two-stage design using a hypothetical Phase II trial of Immune Globulin (Intravenous).     

Likelihood-based panel cointegration test in the presence of a linear time trend and cross-sectional dependence

This article proposes a new likelihood-based panel cointegration rank test which extends the test of Örsal and Droge (2014 Örsal, D. D. K., Droge, B. (2014). Panel cointegration testing in the presence of a time trend. Computational Statistics and Data Analysis 76:377–390.[Crossref], [Web of Science ®] , [Google Scholar]) (henceforth panel SL test) to dependent panels. The dependence is modelled by unobserved common factors which affect the variables in each cross-section through heterogeneous loadings. The data are defactored following the panel analysis of nonstationarity in idiosyncratic and common components (PANIC) approach of Bai and Ng (2004 Bai, J., Ng, S. (2004). A PANIC attack on unit roots and cointegration. Econometrica 72(4):1127–1177.[Crossref], [Web of Science ®] , [Google Scholar]) and the cointegrating rank of the defactored data is then tested by the panel SL test. A Monte Carlo study demonstrates that the proposed testing procedure has reasonable size and power properties in finite samples.     

Longitudinal profiles of bounded outcome scores as predictors for disease activity in rheumatoid arthritis patients: a joint modeling approach

A variety of statistical approaches have been suggested in the literature for the analysis of bounded outcome scores (BOS). In this paper, we suggest a statistical approach when BOSs are repeatedly measured over time and used as predictors in a regression model. Instead of directly using the BOS as a predictor, we propose to extend the approaches suggested in [16 E. Lesaffre, D. Rizopoulos, and R. Tsonaka, The logistics-transform for bounded outcome scores, Biostatistics 8 (2007), pp. 72–85. doi: 10.1093/biostatistics/kxj034[Crossref], [PubMed], [Web of Science ®] , [Google Scholar],21 M. Molas and E. Lesaffre, A comparison of the three random effects approaches to analyse repeated bounded outcome scores with an application in a stroke revalidation study, Stat. Med. 27 (2008), pp. 6612–6633. doi: 10.1002/sim.3432[Crossref], [PubMed], [Web of Science ®] , [Google Scholar],28 R. Tsonaka, D. Rizopoulos, and E. Lesaffre, Power and sample size calculations for discrete bounded outcome scores, Stat. Med. 25 (2006), pp. 4241–4252. doi: 10.1002/sim.2679[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]] to a joint modeling setting. Our approach is illustrated on longitudinal profiles of multiple patients’ reported outcomes to predict the current clinical status of rheumatoid arthritis patients by a disease activities score of 28 joints (DAS28). Both a maximum likelihood as well as a Bayesian approach is developed.     

Empirical Likelihood in Causal Inference

This paper discusses the estimation of average treatment effects in observational causal inferences. By employing a working propensity score and two working regression models for treatment and control groups, Robins et al. (1994 Robins , J. M. , Rotnitzky , A. , Zhao , L. P. ( 1994 ). Estimation of regression coefficients when some regressors are not always observed . Journal of the American Statistical Association 89 : 846 – 866 .[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar], 1995 Robins , J. M. , Rotnitzky , A. , Zhao , L. P. ( 1995 ). Analysis of semiparametric regression models for repeated outcomes in the presence of missing data . Journal of the American Statistical Association 90 : 106 – 121 .[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) introduced the augmented inverse probability weighting (AIPW) method for estimation of average treatment effects, which extends the inverse probability weighting (IPW) method of Horvitz and Thompson (1952 Horvitz , D. G. , Thompson , D. J. ( 1952 ). A generalization of sampling without replacement from a finite universe . Journal of the American Statistical Association 47 : 663 – 685 .[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]); the AIPW estimators are locally efficient and doubly robust. In this paper, we study a hybrid of the empirical likelihood method and the method of moments by employing three estimating functions, which can generate estimators for average treatment effects that are locally efficient and doubly robust. The proposed estimators of average treatment effects are efficient for the given choice of three estimating functions when the working propensity score is correctly specified, and thus are more efficient than the AIPW estimators. In addition, we consider a regression method for estimation of the average treatment effects when working regression models for both the treatment and control groups are correctly specified; the asymptotic variance of the resulting estimator is no greater than the semiparametric variance bound characterized by the theory of Robins et al. (1994 Robins , J. M. , Rotnitzky , A. , Zhao , L. P. ( 1994 ). Estimation of regression coefficients when some regressors are not always observed . Journal of the American Statistical Association 89 : 846 – 866 .[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar], 1995 Robins , J. M. , Rotnitzky , A. , Zhao , L. P. ( 1995 ). Analysis of semiparametric regression models for repeated outcomes in the presence of missing data . Journal of the American Statistical Association 90 : 106 – 121 .[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]). Finally, we present a simulation study to compare the finite-sample performance of various methods with respect to bias, efficiency, and robustness to model misspecification.     

D-Optimal Chemical Balance Weighing Designs with N ≡ 0 (mod 4) and 3 Objects

In this article, the problem of estimation of the individual weights of three objects using a chemical balance weighing design is considered. We use the criterion of D-optimality. We assume that the covariance matrix of errors is the matrix of first-order autoregressive process. Such problems were discussed in Li and Yang (2005 Li , C. H. , Yang , S. Y. ( 2005 ). On a conjecture in D-optimal designs with n ≡ 0 (mod 4) . Lin. Alg. Applic. 400 : 279 – 290 .[Crossref], [Web of Science ®] , [Google Scholar]) and also in Yeh and Lo Huang (2005 Yeh , H. G. , Lo Huang , M. N. ( 2005 ). On exact D-optimal designs with 2 two-level factors and n autocorrelated observations . Metrika 61 : 261 – 275 .[Crossref], [Web of Science ®] , [Google Scholar]). We present some results of D-optimal designs in certain class of designs with the design matrix X  ∈ M _n×3(±1) such that each column of matrix X has at least one 1 and one ?1.     

Robust BCa–JaB method as a diagnostic tool for linear regression models

The Jackknife-after-bootstrap (JaB) technique originally developed by Efron [8 B. Efron, Jackknife-after-bootstrap standard errors and influence functions, J. R. Stat. Soc. 54 (1992), pp. 83–127. [Google Scholar]] has been proposed as an approach to improve the detection of influential observations in linear regression models by Martin and Roberts [12 M.A. Martin and S. Roberts, Jackknife-after-bootstrap regression influence diagnostics, J. Nonparametr. Stat. 22 (2010), pp. 257–269. doi: 10.1080/10485250903287906[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]] and Beyaztas and Alin [2 U. Beyaztas and A. Alin, Jackknife-after-bootstrap method for detection of influential observations in linear regression model, Comm. Statist. Simulation Comput. 42 (2013), pp. 1256–1267. doi: 10.1080/03610918.2012.661908[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]]. The method is based on the use of percentile-method confidence intervals to provide improved cut-off values for several single case-deletion influence measures. In order to improve JaB, we propose using robust versions of Efron [7 B. Efron, Better bootstrap confidence intervals, J. Amer. Statist. Assoc. 82 (1987), pp. 171–185. doi: 10.1080/01621459.1987.10478410[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]]’s bias-corrected and accelerated (BCa) bootstrap confidence intervals. In this study, the performances of robust BCa–JaB and conventional JaB methods are compared in the cases of DFFITS, Welsch's distance and modified Cook's distance influence diagnostics. Comparisons are based on both real data examples and through a simulation study. Our results reveal that under a variety of scenarios, our proposed method provides more accurate and reliable results, and it is more robust to masking effects.     

On the Optimality of Circular Block Designs Under a Mixed Interference Model

Filipiak and Markiewicz (2012 Filipiak, K., Markiewicz, A. (2012). On universal optimality of circular weakly neighbor balanced designs under an interference model. Comm. Stat. Theor Methods 41: 2356–2366.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) proved the universal optimality of circular weakly neighbor balanced designs (CWNBDs) under the interference model with fixed neighbor effects among the class of complete block designs. In two special cases where a CWNBD cannot exist, Filipiak et al. (2012 Filipiak, K., Markiewicz, A., Ró?ański, R. (2012). Maximal determinant over a certain class of matrices and its application to D-optimality of designs. Linear Algebra Appl. 436(4): 874–887.[Crossref], [Web of Science ®] , [Google Scholar]) characterized D-optimal designs. The aim of this paper is to show the universal optimality of CWNBDs and to characterize D-optimal designs under the interference model with random neighbor effects.     

Random Effects,Fixed Effects and Hausman's Test for the Generalized Mixed Regressive Spatial Autoregressive Panel Data Model

This article suggests random and fixed effects spatial two-stage least squares estimators for the generalized mixed regressive spatial autoregressive panel data model. This extends the generalized spatial panel model of Baltagi et al. (2013 Baltagi, B. H., Egger, P., Pfaffermayr, M. (2013). A generalized spatial panel data model with random effects. Econometric Reviews 32:650–685.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) by the inclusion of a spatial lag term. The estimation method utilizes the Generalized Moments method suggested by Kapoor et al. (2007 Kapoor, M., Kelejian, H. H., Prucha, I. R. (2007). Panel data models with spatially correlated error components. Journal of Econometrics 127(1):97–130.[Crossref], [Web of Science ®] , [Google Scholar]) for a spatial autoregressive panel data model. We derive the asymptotic distributions of these estimators and suggest a Hausman test a la Mutl and Pfaffermayr (2011 Mutl, J., Pfaffermayr, M. (2011). The Hausman test in a Cliff and Ord panel model. Econometrics Journal 14:48–76.[Crossref], [Web of Science ®] , [Google Scholar]) based on the difference between these estimators. Monte Carlo experiments are performed to investigate the performance of these estimators as well as the corresponding Hausman test.     

A Modification of a Percentile Estimation Procedure Based on Generalized Polya Urns

Adaptive designs find an important application in the estimation of unknown percentiles for an underlying dose-response curve. A nonparametric adaptive design was suggested by Mugno et al. (2004 Mugno, R.A., Zhus, W., Rosenberger, W.F. (2004). Adaptive urn designs for estimating several percentiles of a dose-response curve. Statist. Med. 23(13):2137–2150.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) to simultaneously estimate multiple percentiles of an unknown dose-response curve via generalized Polya urns. In this article, we examine the properties of the design proposed by Mugno et al. (2004 Mugno, R.A., Zhus, W., Rosenberger, W.F. (2004). Adaptive urn designs for estimating several percentiles of a dose-response curve. Statist. Med. 23(13):2137–2150.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]) when delays in observing responses are encountered. Using simulations, we evaluate a modification of the design under varying group sizes. Our results demonstrate unbiased estimation with minimal loss in efficiency when compared to the original compound urn design.     

Evaluating the relative merits of competing models based on empirical likelihood ratio test

Competing models arise naturally in many research fields, such as survival analysis and economics, when the same phenomenon of interest is explained by different researcher using different theories or according to different experiences. The model selection problem is therefore remarkably important because of its great importance to the subsequent inference; Inference under a misspecified or inappropriate model will be risky. Existing model selection tests such as Vuong's tests [26 Q.H. Vuong, Likelihood ratio test for model selection and non-nested hypothesis, Econometrica 57 (1989), pp. 307–333. doi: 10.2307/1912557[Crossref], [Web of Science ®] , [Google Scholar]] and Shi's non-degenerate tests [21 X. Shi, A non-degenerate Vuong test, Quant. Econ. 6 (2015), pp. 85–121. doi: 10.3982/QE382[Crossref], [Web of Science ®] , [Google Scholar]] suffer from the variance estimation and the departure of the normality of the likelihood ratios. To circumvent these dilemmas, we propose in this paper an empirical likelihood ratio (ELR) tests for model selection. Following Shi [21 X. Shi, A non-degenerate Vuong test, Quant. Econ. 6 (2015), pp. 85–121. doi: 10.3982/QE382[Crossref], [Web of Science ®] , [Google Scholar]], a bias correction method is proposed for the ELR tests to enhance its performance. A simulation study and a real-data analysis are provided to illustrate the performance of the proposed ELR tests.     

Two-sided Confidence Bands with the Inferential Sensitivity of One-Sided Bands

In this article, we consider investigating whether any of k treatments are better than a control under the assumption of each treatment mean being no less than the control mean. A classic problem is to find the simultaneous confidence bounds for the difference between each treatment and the control. Compared with hypothesis testing, confidence bounds have the attractive advantage of telling more information about the effective treatment. Generally, the one-sided lower bounds are provided as it's enough for detecting effective treatment and the one-sided lower bounds has sharper lower bands than two-sided ones. However, a two-sided procedure provides both upper and lower bounds on the differences. In this article, we develop a new procedure which combines the good aspects of both the one-sided and the two-sided procedures. This new procedure has the same inferential sensitivity of the one-sided procedure proposed by Zhao (2007 Zhao , H. B. ( 2007 ). Comparing several treatments with a control . J. Statist. Plann. Infer. 137 : 2996 – 3006 .[Crossref], [Web of Science ®] , [Google Scholar]) while also providing simultaneous two-sided bounds for the differences between treatments and the control. By our computation results, we find the new procedure is better than Hayter, Miwa and Liu's procedure (Hayter et al., 2000 Hayter , A. J. , Miwa , T. , Liu , W. ( 2000 ). Combining the advantages of one-sided and two-sided procedures for comparing several treatments with a control . J. Statist. Plann. Infer. 86 : 81 – 99 .[Crossref], [Web of Science ®] , [Google Scholar]), when the sample size is balanced. We also illustrate the new procedure by an example.     

Designs Robust Against the Presence of an Aberration in a Diallel Cross Design Setup

In this article, we find designs insensitive to the presence of an outlier in a diallel cross design setup for estimating a complete set of orthonormal contrasts among the effects of the general combining abilities of a set of parental lines. The criterion of robustness, suggested by Mandal (1989 Mandal , N. K. ( 1989 ). On robust designs . Cal. Stat. Assoc. Bull. 38 : 115 – 119 . [Google Scholar]) in block design setup and used by Biswas (2012 Biswas , A. ( 2012 ). Block designs robust against the presence of an aberration in a treatment-control setup . Commun. Statist. Theor. Meth. 41 : 920 – 933 .[Taylor & Francis Online], [Web of Science ®] , [Google Scholar]) in treatment-control setup, is adapted here. Complete diallel cross designs, suggested by Gupta and Kageyama (1994 Gupta , S. , Kageyama , S. ( 1994 ). Optimal complete diallel crosses . Biometrika 81 : 420 – 424 .[Crossref], [Web of Science ®] , [Google Scholar]), and partial diallel cross designs, suggested by Gupta et al. (1995 Gupta , S. , Das , A. , Kageyama , S. ( 1995 ). Single replicate orthogonal block designs for circulant partial diallel crosses . Commun. Statist. A 24 : 2601 – 2607 .[Taylor & Francis Online] , [Google Scholar]) and Mukerjee (1997 Mukerjee , R. ( 1997 ). Optimal partial diallel crosses . Biometrika 84 : 939 – 948 .[Crossref], [Web of Science ®] , [Google Scholar]), are found to be robust under certain conditions.     

A comparison of alternative methods to construct confidence intervals for the estimate of a break date in linear regression models

This article considers constructing confidence intervals for the date of a structural break in linear regression models. Using extensive simulations, we compare the performance of various procedures in terms of exact coverage rates and lengths of the confidence intervals. These include the procedures of Bai (1997 Bai, J. (1997). Estimation of a change point in multiple regressions. Review of Economics and Statistics 79:551–563.[Crossref], [Web of Science ®] , [Google Scholar]) based on the asymptotic distribution under a shrinking shift framework, Elliott and Müller (2007 Elliott, G., Müller, U. (2007). Confidence sets for the date of a single break in linear time series regressions. Journal of Econometrics 141:1196–1218.[Crossref], [Web of Science ®] , [Google Scholar]) based on inverting a test locally invariant to the magnitude of break, Eo and Morley (2015 Eo, Y., Morley, J. (2015). Likelihood-ratio-based confidence sets for the timing of structural breaks. Quantitative Economics 6:463–497.[Crossref], [Web of Science ®] , [Google Scholar]) based on inverting a likelihood ratio test, and various bootstrap procedures. On the basis of achieving an exact coverage rate that is closest to the nominal level, Elliott and Müller's (2007 Elliott, G., Müller, U. (2007). Confidence sets for the date of a single break in linear time series regressions. Journal of Econometrics 141:1196–1218.[Crossref], [Web of Science ®] , [Google Scholar]) approach is by far the best one. However, this comes with a very high cost in terms of the length of the confidence intervals. When the errors are serially correlated and dealing with a change in intercept or a change in the coefficient of a stationary regressor with a high signal-to-noise ratio, the length of the confidence interval increases and approaches the whole sample as the magnitude of the change increases. The same problem occurs in models with a lagged dependent variable, a common case in practice. This drawback is not present for the other methods, which have similar properties. Theoretical results are provided to explain the drawbacks of Elliott and Müller's (2007 Elliott, G., Müller, U. (2007). Confidence sets for the date of a single break in linear time series regressions. Journal of Econometrics 141:1196–1218.[Crossref], [Web of Science ®] , [Google Scholar]) method.     

Efficient Mixture Design Fitting Quadratic Surface with Quantile Responses Using First-degree Polynomial

This study considers efficient mixture designs for the approximation of the response surface of a quantile regression model, which is a second degree polynomial, by a first degree polynomial in the proportions of q components. Instead of least squares estimation in the traditional regression analysis, the objective function in quantile regression models is a weighted sum of absolute deviations and the least absolute deviations (LAD) estimation technique should be used (Bassett and Koenker, 1982 Bassett, G., Koenker, R. (1982). An empirical quantile function for linear models with i.i.d. errors. Journal of the American Statistical Association 77:407–415.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]; Koenker and Bassett, 1978 Koenker, R., Bassett, G. (1978). Regression quantiles. Econometrica 46(1):33–50.[Crossref], [Web of Science ®] , [Google Scholar]). Therefore, the standard optimal mixture designs like the D-optimal or A-optimal mixture designs for the least squared estimation are not appropriate. This study explores mixture designs that minimize the bias between the approximated 1st-degree polynomial and a 2nd-degree polynomial response surfaces by the LAD estimation. In contrast to the standard optimal mixture designs for the least squared estimation, the efficient designs might contain elementary centroid design points of degrees higher than two. An example of a portfolio with five assets is given to illustrate the proposed efficient mixture designs in determining the marginal contribution of risks by individual assets in the portfolio.     

Some extensions of circular balanced and circular strongly balanced repeated measurements designs

Repeated measurement designs are widely used in medicine, pharmacology, animal sciences, and psychology. In this paper the works of Iqbal and Tahir (2009 Iqbal, I., and M. H. Tahir. 2009. Circular strongly balanced repeated measurements designs. Communications in Statistics—Theory and Methods 38:3686–96.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) and Iqbal, Tahir, and Ghazali (2010 Iqbal, I., M. H. Tahir, and S. S. A. Ghazali. 2010. Circular first- and second-order balanced repeated measurements designs. Communications in Statistics—Theory and Methods 39:228–40.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) are generalized for the construction of circular-balanced and circular strongly balanced repeated measurements designs through the method of cyclic shifts for three periods.     

Records Properties of Non Stationary Time Series

This article proposes an asymptotic expansion for the Studentized linear discriminant function using two-step monotone missing samples under multivariate normality. The asymptotic expansions related to discriminant function have been obtained for complete data under multivariate normality. The result derived by Anderson (1973 Anderson , T. W. ( 1973 ). An asymptotic expansion of the distribution of the Studentized classification statistic W . The Annals of Statistics 1 : 964 – 972 .[Crossref], [Web of Science ®] , [Google Scholar]) plays an important role in deciding the cut-off point that controls the probabilities of misclassification. This article provides an extension of the result derived by Anderson (1973 Anderson , T. W. ( 1973 ). An asymptotic expansion of the distribution of the Studentized classification statistic W . The Annals of Statistics 1 : 964 – 972 .[Crossref], [Web of Science ®] , [Google Scholar]) in the case of two-step monotone missing samples under multivariate normality. Finally, numerical evaluations by Monte Carlo simulations were also presented.     

Circular Strongly Balanced Repeated Measurements Designs

Magda (1980 Magda , C. G. ( 1980 ). Circular balanced repeated measurements designs . Commun. Statist. Theor. Meth. 9 : 1901 – 1918 .[Taylor & Francis Online], [Web of Science ®] , [Google Scholar]) and Hedayat (1981 Hedayat , A. S. ( 1981 ). Repeated measurements designs-IV: recent advances (with discussion) . Bull. Int. Statist. Inst. 1 : 591 – 610 . [Google Scholar]) first considered the construction of circular strongly balanced repeated measurements designs. Sen and Mukerjee (1987 Sen , M. , Mukerjee , R. ( 1987 ). Optimal repeated measurements designs under interaction . J. Statist. Plann. Infer. 17 : 81 – 91 .[Crossref], [Web of Science ®] , [Google Scholar]) and Roy (1988 Roy , B. K. ( 1988 ). Construction of strongly balanced uniform repeated measurements designs . J. Statist. Plann. Infer. 19 : 341 – 348 .[Crossref], [Web of Science ®] , [Google Scholar]) considered the optimality and existence of circular strongly balanced repeated measurements designs based on the method of differences and Hamiltonian decomposition of lexicographic product of two graphs. In this article, we consider the construction of circular strongly balanced repeated measurements designs using the newly proposed method called cyclic shifts, and propose some new designs for p < v.     

Heteroskedasticity Robust Panel Unit Root Testing Under Variance Breaks in Pooled Regressions

Noting that many economic variables display occasional shifts in their second order moments, we investigate the performance of homogenous panel unit root tests in the presence of permanent volatility shifts. It is shown that in this case the test statistic proposed by Herwartz and Siedenburg (2008 Herwartz, H., Siedenburg, F. (2008). Homogenous panel unit root tests under cross-sectional dependence: Finite sample modifications and the wild bootstrap. Computational Statistics and Data Analysis 53(1):137–150.[Crossref], [Web of Science ®] , [Google Scholar]) is asymptotically standard Gaussian. By means of a simulation study we illustrate the performance of first and second generation panel unit root tests and undertake a more detailed comparison of the test in Herwartz and Siedenburg (2008 Herwartz, H., Siedenburg, F. (2008). Homogenous panel unit root tests under cross-sectional dependence: Finite sample modifications and the wild bootstrap. Computational Statistics and Data Analysis 53(1):137–150.[Crossref], [Web of Science ®] , [Google Scholar]) and its heteroskedasticity consistent Cauchy counterpart introduced in Demetrescu and Hanck (2012a Demetrescu, M., Hanck, C. (2012a). A simple nonstationary-volatility robust panel unit root test. Economics Letters 117(2):10–13.[Crossref], [Web of Science ®] , [Google Scholar]). As an empirical illustration, we reassess evidence on the Fisher hypothesis with data from nine countries over the period 1961Q2–2011Q2. Empirical evidence supports panel stationarity of the real interest rate for the entire subperiod. With regard to the most recent two decades, the test results cast doubts on market integration, since the real interest rate is diagnosed nonstationary.     

Forward Moving Average Representations for MA Processes of Finite Order: Multivariate Stationary and Periodically Correlated

Soltani and Mohammadpour (2006 Soltani , A. R. , Mohammadpour , M. (2006). Moving average representations for multivariate stationary processes. J. Time Ser. Anal. 27(6):831–841.[Crossref], [Web of Science ®] , [Google Scholar]) observed that in general the backward and forward moving average coefficients, correspondingly, for the multivariate stationary processes, unlike the univariate processes, are different. This has stimulated researches concerning derivations of forward moving average coefficients in terms of the backward moving average coefficients. In this article we develop a practical procedure whenever the underlying process is a multivariate moving average (or univariate periodically correlated) process of finite order. Our procedure is based on two key observations: order reduction (Li, 2005 Li , L. M. ( 2005 ). Factorization of moving average spectral densities by state space representations and stacking . J. Multivariate Anal. 96 : 425 – 438 .[Crossref], [Web of Science ®] , [Google Scholar]) and first-order analysis (Mohammadpour and Soltani, 2010 Mohammadpour , M. , Soltani , A. R. ( 2010 ). Forward moving average representation for multivariate MA(1) processes . Commun. Statist. Theory Meth. 39 : 729 – 737 .[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]).