Penalized least-squares estimation for regression coefficients in high-dimensional partially linear models

We consider a partially linear model with diverging number of groups of parameters in the parametric component. The variable selection and estimation of regression coefficients are achieved simultaneously by using the suitable penalty function for covariates in the parametric component. An MM-type algorithm for estimating parameters without inverting a high-dimensional matrix is proposed. The consistency and sparsity of penalized least-squares estimators of regression coefficients are discussed under the setting of some nonzero regression coefficients with very small values. It is found that the root p_n/n-consistency and sparsity of the penalized least-squares estimators of regression coefficients cannot be given consideration simultaneously when the number of nonzero regression coefficients with very small values is unknown, where p_n and n, respectively, denote the number of regression coefficients and sample size. The finite sample behaviors of penalized least-squares estimators of regression coefficients and the performance of the proposed algorithm are studied by simulation studies and a real data example.     

Parameter Estimation Through Weighted Least-Squares Rank Regression with Specific Reference to the Weibull and Gumbel Distributions

Probability plots are often used to estimate the parameters of distributions. Using large sample properties of the empirical distribution function and order statistics, weights to stabilize the variance in order to perform weighted least squares regression are derived. Weighted least squares regression is then applied to the estimation of the parameters of the Weibull, and the Gumbel distribution. The weights are independent of the parameters of the distributions considered. Monte Carlo simulation shows that the weighted least-squares estimators outperform the usual least-squares estimators totally, especially in small samples.     

A probabilistic model for nonsymmetric correspondence analysis and prediction in contingency tables

Summary Nonsymmetric correspondence analysis is a model meant for the analysis of the dependence in a two-way continengy table, and is an alternative to correspondence analysis. Correspondence analysis is based on the decomposition of Pearson's Ф²-index Nonsymmetric correspondence analysis is based on the decomposition of Goodman-Kruskal's τ-index for predicatablity. In this paper, we approach nonsymmetric correspondence analysis as a statistical model based on a probability distribution. We provide algorithms for the maximum likelihood and the least-squares estimation with linear constraints upon model parameters. The nonsymmetric correspondence analysis model has many properties that can be useful for prediction analysis in contingency tables. Predictability measures are introduced to identify the categories of the response variable that can be best predicted, as well as the categories of the explanatory variable having the highest predictability power. We describe the interpretation of model parameters in two examples. In the end, we discuss the relations of nonsymmetric correspondence analysis with other reduced-rank models.     

LEVERAGE ADJUSTMENTS FOR DISPERSION MODELLING IN GENERALIZED NONLINEAR MODELS

For normal linear models, it is generally accepted that residual maximum likelihood estimation is appropriate when covariance components require estimation. This paper considers generalized linear models in which both the mean and the dispersion are allowed to depend on unknown parameters and on covariates. For these models there is no closed form equivalent to residual maximum likelihood except in very special cases. Using a modified profile likelihood for the dispersion parameters, an adjusted score vector and adjusted information matrix are found under an asymptotic development that holds as the leverages in the mean model become small. Subsequently, the expectation of the fitted deviances is obtained directly to show that the adjusted score vector is unbiased at least to O(1/n) . Exact results are obtained in the single‐sample case. The results reduce to residual maximum likelihood estimation in the normal linear case.     

Approaches to regression analysis with multiple measurements from individual sampling units

Application of ordinary least-squares regression to data sets which contain multiple measurements from individual sampling units produces an unbiased estimator of the parameters but a biased estimator of the covariance matrix of the parameter estimates. The present work considers a random coefficient, linear model to deal with such data sets: this model permits many senses in which multiple measurements are taken from a sampling unit, not just when it is measured at several times. Three procedures to estimate the covariance matrix of the error term of the model are considered. Given these, three procedures to estimate the parameters of the model and their covariance matrix are considered; these are ordinary least-squares, generalized least-squares, and an adjusted ordinary least-squares procedure which produces an unbiased estimator of the covariance matrix of the parameters with small samples. These various procedures are compared in simulation studies using three examples from the biological literature. The possibility of testing hypotheses about the vector of parameters is also considered. It is found that all three procedures for regression estimation produce estimators of the parameters with bias of no practical consequence, Both generalized least-squares and adjusted ordinary least-squares generally produce estimators of the covariance matrix of the parameter estimates with bias of no practical consequence, while ordinary least-squares produces a negatively biased estimator. Neither ordinary nor generalized least-squares provide satisfactory hypothesis tests of the vector of parameter estimates. It is concluded that adjusted ordinary least-squares, when applied with either of two of the procedures used to estimate the error coveriance matrix, shows promise for practical application with data sets of the nature considered here.     

Improved Score Tests in Symmetric Linear Regression Models

The class of symmetric linear regression models has the normal linear regression model as a special case and includes several models that assume that the errors follow a symmetric distribution with longer-than-normal tails. An important member of this class is the t linear regression model, which is commonly used as an alternative to the usual normal regression model when the data contain extreme or outlying observations. In this article, we develop second-order asymptotic theory for score tests in this class of models. We obtain Bartlett-corrected score statistics for testing hypotheses on the regression and the dispersion parameters. The corrected statistics have chi-squared distributions with errors of order O(n ^?3/2), n being the sample size. The corrections represent an improvement over the corresponding original Rao's score statistics, which are chi-squared distributed up to errors of order O(n ^?1). Simulation results show that the corrected score tests perform much better than their uncorrected counterparts in samples of small or moderate size.     

Rank estimation for the functional linear model

This article discusses the estimation of the parameter function for a functional linear regression model under heavy-tailed errors' distributions and in the presence of outliers. Standard approaches of reducing the high dimensionality, which is inherent in functional data, are considered. After reducing the functional model to a standard multiple linear regression model, a weighted rank-based procedure is carried out to estimate the regression parameters. A Monte Carlo simulation and a real-world example are used to show the performance of the proposed estimator and a comparison made with the least-squares and least absolute deviation estimators.     

Model averaging procedure for varying-coefficient partially linear models with missing responses

This paper is concerned with model averaging procedure for varying-coefficient partially linear models with missing responses. The profile least-squares estimation process and inverse probability weighted method are employed to estimate regression coefficients of the partially restricted models, in which the propensity score is estimated by the covariate balancing propensity score method. The estimators of the linear parameters are shown to be asymptotically normal. Then we develop the focused information criterion, formulate the frequentist model averaging estimators and construct the corresponding confidence intervals. Some simulation studies are conducted to examine the finite sample performance of the proposed methods. We find that the covariate balancing propensity score improves the performance of the inverse probability weighted estimator. We also demonstrate the superiority of the proposed model averaging estimators over those of existing strategies in terms of mean squared error and coverage probability. Finally, our approach is further applied to a real data example.     

A comparison of estimation techniques for the three parameter pareto distribution

This paper compares minimum distance estimation with best linear unbiased estimation to determine which technique provides the most accurate estimates for location and scale parameters as applied to the three parameter Pareto distribution. Two minimum distance estimators are developed for each of the three distance measures used (Kolmogorov, Cramer‐von Mises, and Anderson‐Darling) resulting in six new estimators. For a given sample size 6 or 18 and shape parameter 1(1)4, the location and scale parameters are estimated. A Monte Carlo technique is used to generate the sample sets. The best linear unbiased estimator and the six minimum distance estimators provide parameter estimates based on each sample set. These estimates are compared using mean square error as the evaluation tool. Results show that the best linear unbaised estimator provided more accurate estimates of location and scale than did the minimum estimators tested.     

Variance Reduction Using Nonlinear Controls and Transformations

Nonlinear regression-adjusted control variables are investigated for improving variance reduction in statistical and system simulations. To this end, simple control variables are piecewise sectioned and then transformed using linear and nonlinear transformations. Optimal parameters of these transformations are selected using linear or nonlinear least-squares regression algorithms. As an example, piecewise power-transformed variables are used in the estimation of the mean for the twovariable Anderson-Darling goodness-of-fit statistic W ₂ ². Substantial variance reduction over straightforward controls is obtained. These parametric transformations are compared against optimal, additive nonparametric transformations obtained by using the ACE algorithm and are shown, in comparison to the results from ACE, to be nearly optimal.     

A robust coefficient of determination for regression

To assess the quality of the fit in a multiple linear regression, the coefficient of determination or R² is a very simple tool, yet the most used by practitioners. Indeed, it is reported in most statistical analyzes, and although it is not recommended as a final model selection tool, it provides an indication of the suitability of the chosen explanatory variables in predicting the response. In the classical setting, it is well known that the least-squares fit and coefficient of determination can be arbitrary and/or misleading in the presence of a single outlier. In many applied settings, the assumption of normality of the errors and the absence of outliers are difficult to establish. In these cases, robust procedures for estimation and inference in linear regression are available and provide a suitable alternative.     

Modal non‐linear regression in the presence of Laplace measurement error

In this paper, we propose a robust estimation procedure for a class of non‐linear regression models when the covariates are contaminated with Laplace measurement error, aiming at constructing an estimation procedure for the regression parameters which are less affected by the possible outliers, and heavy‐tailed underlying distribution, as well as reducing the bias introduced by the measurement error. Starting with the modal regression procedure developed for the measurement error‐free case, a non‐trivial modification is made so that the modified version can effectively correct the potential bias caused by measurement error. Large sample properties of the proposed estimate, such as the convergence rate and the asymptotic normality, are thoroughly investigated. A simulation study and real data application are conducted to illustrate the satisfying finite sample performance of the proposed estimation procedure.     

Confidence sets in a linear regression model for interval data

The construction of confidence sets for the parameters of a flexible simple linear regression model for interval-valued random sets is addressed. For that purpose, the asymptotic distribution of the least-squares estimators is analyzed. A simulation study is conducted to investigate the performance of those confidence sets. In particular, the empirical coverages are examined for various interval linear models. The applicability of the procedure is illustrated by means of a real-life case study.     

The beta generalized linear exponential distribution

In this paper, a new five-parameter lifetime distribution called beta generalized linear exponential distribution (BGLED) is introduced. It includes at least 17 popular sub-models as special cases such as the beta linear exponential, the beta generalized exponential, and the exponentiated generalized linear distributions. Mathematical and statistical properties of the proposed distribution are discussed in details. In particular, explicit expression for the density function, moments, asymptotics distributions for sample extreme statistics, and other statistical measures are obtained. The estimation of the parameters by the method of maximum-likelihood is discussed and the finite sample properties of the maximum-likelihood estimators (MLEs) are investigated numerically. A real data set is used to demonstrate its superior performance fit over several existing popular lifetime models.     

Estimating the parameters of the linear compartment model

In this paper we consider the linear compartment model and consider the estimation procedures of the different parameters. We discuss a method to obtain the initial estimators, which can be used for any iterative procedures to obtain the least-squares estimators. Four different types of confidence intervals have been discussed and they have been compared by computer simulations. We propose different methods to estimate the number of components of the linear compartment model. One data set has been used to see how the different methods work in practice.     

Small-sample intervals for regression

For the general linear regression model Y = Xη + e, we construct small-sample exponentially tilted empirical confidence intervals for a linear parameter 6 = a^Tη and for nonlinear functions of η. The coverage error for the intervals is O_p(1/n), as shown in Tingley and Field (1990). The technique, though sample-based, does not require bootstrap resampling. The first step is calculation of an estimate for η. We have used a Mallows estimate. The algorithm applies whenever η is estimated as the solution of a system of equations having expected value 0. We include calculations of the relative efficiency of the estimator (compared with the classical least-squares estimate). The intervals are compared with asymptotic intervals as found, for example, in Hampel et at. (1986). We demonstrate that the procedure gives sensible intervals for small samples.     

Asymptotic theory for bent-cable regression—the basic case

We use what we call the bent-cable model to describe potential change-point phenomena. The class of bent cables includes the commonly used broken stick (a bent cable without a bend segment). Theory for least-squares (LS) estimation is developed for the basic bent cable, whose incoming and outgoing linear phases have slopes 0 and 1, respectively, and are joined smoothly by a quadratic bend. Conditions on the design are given to ensure regularity of the estimation problem, despite non-differentiability of the model's first partial derivatives (with respect to the covariate and model parameters). Under such conditions, we show that the LS estimators (i) are consistent, regardless of a zero or positive true bend width; and (ii) asymptotically follow a bivariate normal distribution, if the underlying cable has all three segments. In the latter case, we show that the deviance statistic has an asymptotic chi-squared distribution with two degrees of freedom.     

Re-weighting estimation of the coefficients in the varying coefficient model with heteroscedastic errors

ABSTRACT

This article explores the estimation problem of the coefficients in the varying coefficient model with heteroscedastic errors. Specifically, we first present a method for estimating the variance function of the error term and the resulting estimator is proved to be consistent. Then, motivated by the generalized least-squares procedure for dealing with heteroscedasticity in the linear regression literature, we re-weight each squared residual term in the local linear smoother with the inverse of the corresponding estimated error variance to construct estimates of the coefficients. Simulation experiments and practical data analysis conducted demonstrate that the re-weighting approach can improve the accuracy of the coefficient estimates under a finite sample size, especially when the error heteroscedasticity is strong.     

Empirical Bayes models of Poisson clinical trials and sample size determination

Bayesian methods are often used to reduce the sample sizes and/or increase the power of clinical trials. The right choice of the prior distribution is a critical step in Bayesian modeling. If the prior not completely specified, historical data may be used to estimate it. In the empirical Bayesian analysis, the resulting prior can be used to produce the posterior distribution. In this paper, we describe a Bayesian Poisson model with a conjugate Gamma prior. The parameters of Gamma distribution are estimated in the empirical Bayesian framework under two estimation schemes. The straightforward numerical search for the maximum likelihood (ML) solution using the marginal negative binomial distribution is unfeasible occasionally. We propose a simplification to the maximization procedure. The Markov Chain Monte Carlo method is used to create a set of Poisson parameters from the historical count data. These Poisson parameters are used to uniquely define the Gamma likelihood function. Easily computable approximation formulae may be used to find the ML estimations for the parameters of gamma distribution. For the sample size calculations, the ML solution is replaced by its upper confidence limit to reflect an incomplete exchangeability of historical trials as opposed to current studies. The exchangeability is measured by the confidence interval for the historical rate of the events. With this prior, the formula for the sample size calculation is completely defined. Published in 2009 by John Wiley & Sons, Ltd.     

Estimation of harmonic component in regression with cyclically dependent errors

This paper deals with the estimation of hidden periodicities in a non-linear regression model with stationary noise displaying cyclical dependence. Consistency and asymptotic normality are established for the least-squares estimates.