Scheduling a single semi-continuous batching machine

This paper addresses a new problem, called semi-continuous batch scheduling, which arises in the heating-operation of tube-billets in the steel industry. Each heating furnace can be regarded as a semi-continuous batching machine, which can handle up to C jobs simultaneously. The jobs in the same batch enter and leave the machine semi-continuously, which differs from the traditional batching machine scheduling where the jobs in same batch have a starting time and a finishing time. In this paper the processing time of a batch depends on the capacity of the semi-continuous batching machine, the longest processing time of jobs in the batch and its size. The objectives are to schedule jobs on the machine so that the makespan and the total completion time are minimized. A schedule for a semi-continuous batching machine consists of a batching and sequencing for the batches. We propose the optimal properties of two different objective functions and present the different dynamic programming algorithms with a running time of O(n²), respectively.     

Multi-objective permutation flow shop scheduling problem: Literature review,classification and current trends

The flow shop scheduling problem is finding a sequence given n jobs with same order at m machines according to certain performance measure(s). The job can be processed on at most one machine; meanwhile one machine can process at most one job. The most common objective for this problem is makespan. However, many real-world scheduling problems are multi-objective by nature. Over the years there have been several approaches used to deal with the multi-objective flow shop scheduling problems (MOFSP). Hence, in this study, we provide a brief literature review of the contributions to MOFSP and identify areas of opportunity for future research.     

Non-resumable scheduling on a single bounded parallel-batch machine with periodic maintenance

We consider the problem of scheduling a set of jobs with different processing times and sizes on a single bounded parallel-batch machine with periodic maintenance. Because the machine is in batch-processing model and the capacity is fixed, several jobs can be processed simultaneously in a batch provided that the total size of the jobs in the batch doesn’t exceed the machine capacity. And the processing time of a batch is the largest processing time of the jobs contained in the batch. Meanwhile, the production of each batch is non-resumable, that is, if a batch cannot be completed processing before some maintenance, that batch needs to be processed anew once the machine returns available. Our goal is to minimize the makespan. We first consider two special cases where the jobs have the same sizes or the same processing times, both of which are strongly NP-hard. We present two different approximation algorithms for them and show that these two algorithms have the same tight worst-case ratio of 2. We then consider the general case where the jobs have the arbitrary processing times and arbitrary sizes, for which we propose a 17/5-approximation algorithm.

     

Competitive analysis of online machine rental and online parallel machine scheduling problems with workload fence

In this paper, we introduce the concept of “workload fence" into online machine rental and machine scheduling problems. With the knowledge of workload fence, online algorithms acquire the information of a finite number of first released jobs in advance. The concept originates from the frozen time fence in the domain of master scheduling in materials management. The total processing time of the jobs foreseen, corresponding to a finite number of jobs, is called workload fence, which is irrelevant to the job sequence. The remaining jobs in the sequence, however, can only become known on their arrival. This work aims to reveal whether the knowledge of workload fence helps to boost the competitive performance of deterministic online algorithms. For the online machine rental problem, we prove that the competitiveness of online algorithms can be improved with a sufficiently large workload fence. We further propose a best online algorithm for the corresponding scenario. For online parallel machine scheduling with workload fence, we give a positive answer to the above question for the case where the workload fence is equal to the length of the longest job. We also show that the competitiveness of online algorithms may not be improved even with a workload fence strictly larger than the largest length of a job. The results help one manager to make a better decision regarding the tradeoff between the performance improvement of online algorithms and the cost caused to acquire the knowledge of workload fence.

     

Scheduling in an assembly-type production chain with batch transfer

This paper addresses a three-machine assembly-type flowshop scheduling problem, which frequently arises from manufacturing process management as well as from supply chain management. Machines one and two are arranged in parallel for producing component parts individually, and machine three is an assembly line arranged as the second stage of a flowshop for processing the component parts in batches. Whenever a batch is formed on the second-stage machine, a constant setup time is required. The objective is to minimize the makespan. In this study we establish the strong NP-hardness of the problem for the case where all the jobs have the same processing time on the second-stage machine. We then explore a useful property, based upon which a special case can be optimally solved in polynomial time. We also study several heuristic algorithms to generate quality approximate solutions for the general problem. Computational experiments are conducted to evaluate the effectiveness of the algorithms.     

2-Distance vertex-distinguishing index of subcubic graphs

This paper addresses the performance of scheduling algorithms for a two-stage no-wait hybrid flowshop environment with inter-stage flexibility, where there exist several parallel machines at each stage. Each job, composed of two operations, must be processed from start to completion without any interruption either on or between the two stages. For each job, the total processing time of its two operations is fixed, and the stage-1 operation is divided into two sub-parts: an obligatory part and an optional part (which is to be determined by a solution), with a constraint that no optional part of a job can be processed in parallel with an idleness of any stage-2 machine. The objective is to minimize the makespan. We prove that even for the special case with only one machine at each stage, this problem is strongly NP-hard. For the case with one machine at stage 1 and m machines at stage 2, we propose two polynomial time approximation algorithms with worst case ratio of \(3-\frac{2}{m+1}\) and \(2-\frac{1}{m+1}\), respectively. For the case with m machines at stage 1 and one machine at stage 2, we propose a polynomial time approximation algorithm with worst case ratio of 2. We also prove that all the worst case ratios are tight.     

Comparative evaluation of genetic algorithms for job-shop scheduling

Many optimization problems from the industrial engineering world, in particular the manufacturing systems, are very complex in nature and quite hard to solve by conventional optimization techniques. There has been increasing interest in imitating living beings to solve such kinds of hard optimization problems. Simulating the natural evolutionary process of human beings results in stochastic optimization tech niques called evolutionary algorithms, which can often outperform conventional optimization methods when applied to difficult real-world problems. There are currently three main avenues of this research: genetic algorithms (GAs), evolutionary programming (EP) and evolution strategies (ESs). Among them, genetic algorithms are perhaps the most widely known types of evolutionary algorithms today. During the past years, several GAs for the job-shop scheduling problems have been proposed, each with different chromosome representation. In this paper, the different GAs are collected from the literature and an attempt has been made to evaluate them. The benchmark problems available in open literature are used for evaluation and the performance measure considered is makespan. The algorithms are coded in C+ +.     

基于改进遗传算法的置换装配线调度问题研究

企业的置换装配线调度问题（Permutation Assembly-line Scheduling Problem,PASP）是一类典型的NP-hard型生产调度问题,是现代集成制造系统CIMS极为关心的问题。该问题可以具体描述为n个工件要在m台机器上加工,每个工件需要经过m道工序,每道工序要求不同的机器,这n个工件通过m台机器的顺序相同,它们在每台机器上的加工顺序也相同,问题的主要目标是找到n个工件在每台机器上的最优加工顺序,使得最大完工时间最小。由于PASP问题的NP-hard性质,本文使用遗传算法对其进行求解。尽管遗传算法常用以求解调度问题,但其选择与交叉机制易导致局部最优及收敛慢。因此,本文提出基于区块挖掘与重组的改进遗传算法用于求解置换装配线调度问题。首先通过关联规则挖掘出不同的优秀基因,然后将具有较优结果的基因组合为优势区块,产生具优势的人工解,并引入高收敛性的局部搜索方法,提高搜索到最优解的机会与收敛效率。本文以OR-Library中Taillard标准测试例来验证改进遗传算法的求解质量与效率,结果证明：本文所提算法与其它求解调度问题的现有5种知名算法相比,不仅收敛速度较快,同时求解质量优于它们。     

A simulated annealing algorithm for job shop scheduling

In this paper, the job shop scheduling problem is considered with the objective of minimization of makespan time. We first reviewed the literature on job shop scheduling using meta-heuristics. Then a simulated annealing algorithm is presented for scheduling in a job shop. To create neighbourhoods, three perturbation schemes, viz. pairwise exchange, insertion, and random insertion are used, and the effect of them on the final schedule is also compared. The proposed simulated annealing algorithm is compared with existing genetic algorithms and the comparative results are presented. For comparative evaluation, a wide variety of data sets are used. The proposed algorithm is found to perform well for scheduling in the job shop.     

Dynamic scheduling of manufacturing job shops using extreme value theory

Most job shop scheduling approaches reported in the literature assume that the scheduling problem is static (i.e. job arrivals and the breakdowns of machines are neglected) and in addition, these scheduling approaches may not address multiple criteria scheduling or accommodate alternate resources to process a job operation. In this paper, a scheduling method based on extreme value theory (SEVAT) is developed and addresses all the shortcomings mentioned above. The SEVAT approach creates a statistical profile of schedules through random sampling, and predicts the quality or 'potential' of a feasible schedule. A dynamic scheduling problem was designed to reflect a real job shop scheduling environment closely. Two performance measures, viz. mean job tardiness and mean job cost, were used to demonstrate multiple criteria scheduling. Three factors were identified, and varied between two levels each, thereby spanning a varied job shop environment. The results of this extensive simulation study show that the SEVAT scheduling approach produces a better performance compared to several common dispatching rules.     

Separating online scheduling algorithms with the relative worst order ratio

The relative worst order ratio is a measure for the quality of online algorithms. Unlike the competitive ratio, it compares algorithms directly without involving an optimal offline algorithm. The measure has been successfully applied to problems like paging and bin packing. In this paper, we apply it to machine scheduling. We show that for preemptive scheduling, the measure separates multiple pairs of algorithms which have the same competitive ratios; with the relative worst order ratio, the algorithm which is “intuitively better” is also provably better. Moreover, we show one such example for non-preemptive scheduling.     

Optimal on-line algorithms for one batch machine with grouped processing times

In this paper, we study on-line scheduling problems on a batch machine with the assumption that all jobs have their processing times in [p, (1+φ)p], where p>0 and \(\phi=(\sqrt{5}-1)/2\). Jobs arrive over time. First, we deal with the on-line problem on a bounded batch machine with the objective to minimize makespan. A class of algorithms with competitive ratio \((\sqrt{5}+1)/2\) are given. Then we consider the scheduling on an unbounded batch machine to minimize the time by which all jobs have been delivered, and provide a class of on-line algorithms with competitive ratio \((\sqrt{5}+1)/2\). The two class of algorithms are optimal for the problems studied here.     

Efficient Job Scheduling Algorithms with Multi-Type Contentions

In this paper, we consider an interesting generalization of the classic job scheduling problem in which each job needs to compete not only for machines but also for other types of resources. The contentions among jobs for machines and for resources could interfere with each other, which complicates the problem dramatically. We present a family of approximation algorithms for solving several variants of the problem by using a generic algorithmic framework. Our algorithms achieve a constant approximation ratio (i.e., 3) when there is only one type of resources or certain dependency relation exists among multiple types of resources. When the r resources are unrelated, the approximation ratio of our algorithm becomes k+2, where k≤ r is a constant depending on the problem instance. As an application, we also show that our techniques can be easily applied to optical burst switching (OBS) networks to design more efficient wavelength scheduling algorithms.This research was supported in part by an IBM faculty partnership award, and an IRCAF award from SUNY Buffalo.     

Single-machine scheduling problems with general truncated sum-of-actual-processing-time-based learning effect

We study single machine scheduling problems with general truncated sum-of-actual-processing-time-based learning effect. In the general truncated learning model, the actual processing time of a job is affected by the sum of actual processing times of previous jobs and by a job-dependent truncation parameter. We show that the single machine problems to minimize makespan and to minimize the sum of weighted completion times are both at least ordinary NP-hard and the single machine problem to minimize maximum lateness is strongly NP-hard. We then show polynomial solvable cases and approximation algorithms for these problems. Computational experiments are also conducted to show the effectiveness of our approximation algorithms.

     

On-Line Scheduling Algorithms for a Batch Machine with Finite Capacity

We study the problem of on-line scheduling jobs with release dates on a batch machine of finite capacity with the objective of minimizing the makespan. We generalize several existing algorithms for the problem to a class of on-line algorithms that are 2-competitive for any arbitrary finite machine capacity. Then, we show that one of these generalized algorithms is in fact 7/4-competitive for machine capacity 2. This is the first on-line algorithm for a finite machine capacity with competitive ratio less than 2.This research is substantially supported by a grant from City Univ. of Hong Kong (Grant No. 7001119). The second author is supported by this grant and by the Natural Science Foundation of China.     

Semi-online scheduling on two identical machines with rejection

In this paper we consider two semi-online scheduling problems with rejection on two identical machines. A sequence of independent jobs are given and each job is characterized by its size (processing time) and its penalty, in the sense that, jobs arrive one by one and can be either rejected by paying a certain penalty or assigned to some machine. No preemption is allowed. The objective is to minimize the sum of the makespan of schedule, which is yielded by all accepted jobs and the total penalties of all rejected ones. In the first problem one can reassign several scheduled jobs in rejection tache, in the second a buffer with length k is available in rejection tache. Two optimal algorithms both with competitive ratio $\frac{3}{2}$ are presented.     

A closed loop automatic scheduling system (CLASS)

Abstract

CLASS is a production scheduling system, that is designed to function in either a stand-alone manner, or in conjunction with an MRP system. MRP systems innately do not have 'closed loop’ capability in the sense of being able to produce master schedules and order releases that are consistent and that respect capacity constraints. True closed loop performance requires detailed scheduling. In addition to interfacing with MRP systems, CLASS is designed to produce schedules that can be used in conventional shops or can be downloaded to automated facilities. The design goals for the system, its internal architecture, and its role in manufacturing control systems are described. The modelling and decision capabilities     

Discrete parallel machine makespan ScheLoc problem

Scheduling–Location (ScheLoc) problems integrate the separate fields of scheduling and location problems. In ScheLoc problems the objective is to find locations for the machines and a schedule for each machine subject to some production and location constraints such that some scheduling objective is minimized. In this paper we consider the discrete parallel machine makespan ScheLoc problem where the set of possible machine locations is discrete and a set of n jobs has to be taken to the machines and processed such that the makespan is minimized. Since the separate location and scheduling problem are both \(\mathcal {NP}\)-hard, so is the corresponding ScheLoc problem. Therefore, we propose an integer programming formulation and different versions of clustering heuristics, where jobs are split into clusters and each cluster is assigned to one of the possible machine locations. Since the IP formulation can only be solved for small scale instances we propose several lower bounds to measure the quality of the clustering heuristics. Extensive computational tests show the efficiency of the heuristics.     

Scheduling two job families on a single machine with two competitive agents

We consider the scheduling problems arising when two agents, each with a family of jobs, compete to perform their respective jobs on a single machine. A setup time is needed for a job if it is the first job to be processed on the machine or its processing on the machine follows a job that belongs to another family. Each agent wants to minimize a certain cost function, which depends on the completion times of its jobs only. The aim is to find a schedule for all the jobs of the two agents that minimizes the objective of one agent while keeping the objective of the other agent being bounded by a fixed value \(Q\). Polynomial-time and pseudo-polynomial-time algorithms are designed to solve the problem involving various combinations of regular scheduling objective functions.     

考虑分时电价的多目标批调度问题蚁群算法求解

对同时优化电力成本和制造跨度的多目标批处理机调度问题进行了研究,设计了两种多目标蚁群算法,基于工件序的多目标蚁群算法(J-PACO,Job-based Pareto Ant Colony Optimization)和基于成批的多目标蚁群算法(B-PACO,Batch-based Pareto Ant Colony Optimization)对问题进行求解分析。由于分时电价中电价是时间的函数,因而在传统批调度进行批排序的基础上,需要进一步确定批加工时间点以测定电力成本。提出的两种蚁群算法分别将工件和批与时间线相结合进行调度对此类问题进行求解。通过仿真实验将两种算法对问题的求解进行了比较,仿真实验表明B-PACO算法通过结合FFLPT(First Fit Longest Processing Time)启发式算法先将工件成批再生成最终方案,提高了算法搜索效率,并且在衡量算法搜索非支配解数量的Q指标和衡量非支配集与Pareto边界接近程度的HV指标上,均优于J-PACO算法。