Response to the “letter to the editor”

First of all, the parameters involved in Chen and Hsu (1995) are unknown. For convenience, we discussed the two possibilities of the unknown parameter μ namely μ =M and μ M, separately. In other words, we do not known wheter μ = M or μ M. Therefore, we must estimate it before drawing any statistical conclusion about the index C_pmk, The conclusion should be applied only after th ehypothesis if μ = M is tested.     

Estimation of the Parameters of the Birnbaum–Saunders Distribution

Some alternative estimators to the maximum likelihood estimators of the two parameters of the Birnbaum–Saunders distribution are proposed. Most have high efficiencies as measured by root mean square error and are robust to departure from the model as well as to outliers. In addition, the proposed estimators are easy to compute. Both complete and right-censored data are discussed. Simulation studies are provided to compare the performance of the estimators.     

On the Restricted Liu Estimator in the Gauss–Markov Model

In this paper, we compare two estimators, the RLE (restricted Liu estimator) and the RLSE (restricted least squares estimator) of parameters in linear models under Gauss–Markov models. Using generalized inverse of matrices, we found some equivalency conditions for the superiority of the RLE with respect to the MSE criterion.     

Increasing the Power of the Test Through Pre-Test – A Robust Method

Robust test procedures are developed for testing the intercept of a simple regression model when the slope is (i) completely unspecified, (ii) specified to a fixed value, or (iii) suspected to be a fixed value. Defining (i) unrestricted (UT), (ii) restricted (RT), and (iii) pre-test test (PTT) functions for the intercept parameter under the three choices of the slope, tests are formulated using the M-estimation methodology. The asymptotic distributions of the test statistics and their asymptotic power functions are derived. The analytical and graphical comparisons of the tests reveal that the PTT achieves a reasonable dominance over the other tests.     

A Cautionary Note on the Use of the Grønnesby and Borgan Goodness-of-Fit Test for the Cox Proportional Hazards Model

Grønnesby and Borgan (1996, Lifetime Data Analysis 2, 315–328) propose an omnibus goodness-of-fit test for the Cox proportional hazards model. The test is based on grouping the subjects by their estimated risk score and comparing the number of observed and a model based estimated number of expected events within each group. We show, using extensive simulations, that even for moderate sample sizes the choice of number of groups is critical for the test to attain the specified size. In light of these results we suggest a grouping strategy under which the test attains the correct size even for small samples. The power of the test statistic seems to be acceptable when compared to other goodness-of-fit tests.     

On selecting from k finite populations the population with the largest α -quantile

Several procedures for ranking populations according to the quantile of a given order have been discussed in the literature. These procedures deal with continuous distributions. This paper deals with the problem of selecting a population with the largest α-quantile from k ≥ 2 finite populatins, where the size of each population is known. A selection rule is given based on the sample quantiles, where he samples are drawn without replacement. A formula for the minimum probability of a correct selection for the given rule, for a certain configuration of the population α-quantiles, is given in terms of the sample numbers.     

Bayesian Model Selection: Measuring the χ2 Discrepancy with the Uniform Distribution

In the last years, many articles have been written about Bayesian model selection. In this article, a different and easier method is proposed and analyzed. The key idea of this method is based on the well-known property that, under the true model, the cumulative distribution function is distributed as a uniform distribution over the interval (0, 1). The method is first introduced for the continuous case and then for the discrete case by smoothing the cumulative distribution function. Some asymptotical properties of the method are obtained by developing an alternative to Helly's theorems. Finally, the performance of the method is evaluated by simulation, showing a good behavior.     

Computing the distribution of sequential Hölder norms of the Brownian motion

ABSTRACT

In this article, we give explicit formulas and study practical computations for the distribution function of sequential Hölder norms of a Brownian motion and of a Brownian bridge. We also discuss some statistical applications in the detection of some short “epidemic” changes in a sample.     

On the Behrens–Fisher problem from the spatial median point of view

We present a non-parametric affine-invariant test for the multivariate Behrens–Fisher problem. The proposed method based on the spatial medians is asymptotic and does not require normality of the data. To improve its finite sample performance, we apply a correction of the type which was already used in a similar test based on trimmed means, however, our simulations show that in the case of heavy-tailed distributions our method performs better. Also in a simulation comparison with a recently published rank-based test our test yields satisfactory results.     

When does the expectation of a ratio equal the ratio of expectations?

In this paper we investigate the behaviour of a ratio of random variables and try to find conditions under which, this expectation equals the ratio of expectations.     

Bootstrapping the augmented Dickey–Fuller test for unit root using the MDIC

In this paper, we consider the bootstrap procedure for the augmented Dickey–Fuller (ADF) unit root test by implementing the modified divergence information criterion (MDIC, Mantalos et al. [An improved divergence information criterion for the determination of the order of an AR process, Commun. Statist. Comput. Simul. 39(5) (2010a), pp. 865–879; Forecasting ARMA models: A comparative study of information criteria focusing on MDIC, J. Statist. Comput. Simul. 80(1) (2010b), pp. 61–73]) for the selection of the optimum number of lags in the estimated model. The asymptotic distribution of the resulting bootstrap ADF/MDIC test is established and its finite sample performance is investigated through Monte-Carlo simulations. The proposed bootstrap tests are found to have finite sample sizes that are generally much closer to their nominal values, than those tests that rely on other information criteria, like the Akaike information criterion [H. Akaike, Information theory and an extension of the maximum likelihood principle, in Proceedings of the 2nd International Symposium on Information Theory, B.N. Petrov and F. Csáki, eds., Akademiai Kaido, Budapest, 1973, pp. 267–281]. The simulations reveal that the proposed procedure is quite satisfactory even for models with large negative moving average coefficients.     

Is the Selected Population the Best?—Location and Scale Parameter Cases

We observe X ₁,…,X _k , where X _i has density f(x,θ _i ) possessing monotone likelihood ratio. The best population corresponds to the largest θ _i . We select the population corresponding to the largest X _i . The goal is to attach the best possible p-value to the inference: the selected population has the uniquely largest θ _i . Gutmann and Maymin (1987 Gutmann , S. , Maymin , Z. ( 1987 ). Is the selected population the best? Ann. Statist . 15 : 456 – 461 .[Crossref], [Web of Science ®] , [Google Scholar]) considered the location parameter case and derived the supremum of the error probability by conditioning on S, the index of the largest X _i . Using this conditioning approach, Kannan and Panchapakesan (2009 Kannan , N. , Panchapakesan , S. ( 2009 ). Does the selected normal population have the smallest variance? Amer. J. Math. Management Sci . 29 : To appear . [Google Scholar]) considered the problem for the gamma family. We consider here a unified approach to both the location and scale parameter cases, and obtain the supremum of the error probability without using conditioning.     

Some further aspects of the löwner-ordering antitonicity of the moore-penrose inverse

A survey is given of known proofs of the antitonicity of the inverse matrix function for positive definite matrices w.r.t. the Lowner partial ordering, and of the corresponding result for the Moore-Penrose inverse of nonnegative definite matrices [the theorem of Milliken and Akdeniz (1977)]. A short new proof of the latter result is obtained by employing an extremal representation of a nonnegative definite quadratic form. Another proof of this result involving Schur complements is also given, and is seen to be extendable to the case of symmetric (not necessarily nonnegative definite) matrices. A geometrical interpretation of Milliken and Akdeniz's theorem is presented. As an application, the relationship between the concepts of greater (maximum) concentration and smaller (minimum) dispersion is considered for a pair (class) of vector-valued statistics with possibly degenerate distributions.     

Stockouts and Restocking: Monitoring the Retailer from the Supplier’s Perspective

Suppliers and retailers typically do not have identical incentives to avoid stockouts (lost sales due to the lack of product availability on the shelf). Thus, the supplier needs to monitor the retailer’s restocking efforts with the available data. We empirically assess stockout levels using only shipment and sales data that is readily available to the supplier. The model distinguishes between store stockouts (zero inventory in the store) and shelf stockouts (an empty shelf but some inventory in other parts of the store), thereby identifying the cause of the stockout to be either a supply chain or a restocking issue. We find that, as suspected by the supplier, the average stockout rate is much higher than published averages. In addition, stockout rates vary widely between stores. Moreover, almost all stockouts are shelf stockouts. The model identifies stores that may have restocking issues.     

Who creates the jobs?

Small business start-ups create most of the new jobs in our economy. It is an attractive argument to those who want governments to support small businesses. But is it true? Or are large firms the ones that generate most jobs? Michael Anyadike-Danes, Mark Hart and Karen Bonner examine a long-running and acrimonious dispute.     

How precise is the finite sample approximation of the asymptotic distribution of realised variation measures in the presence of jumps?

This paper studies the impact of jumps on volatility estimation and inference based on various realised variation measures such as realised variance, realised multipower variation and truncated realised multipower variation. We review the asymptotic theory of those realised variation measures and present a new estimator for the asymptotic ‘variance’ of the centered realised variance in the presence of jumps. Next, we compare the finite sample performance of the various estimators by means of detailed Monte Carlo studies. Here we study the impact of the jump activity, of the jump size of the jumps in the price and of the presence of additional independent or dependent jumps in the volatility. We find that the finite sample performance of realised variance and, in particular, of log-transformed realised variance is generally good, whereas the jump-robust statistics tend to struggle in the presence of a highly active jump process.