Non‐Parametric Change‐Point Tests for Long‐Range Dependent Data

Abstract. We propose a non‐parametric change‐point test for long‐range dependent data, which is based on the Wilcoxon two‐sample test. We derive the asymptotic distribution of the test statistic under the null hypothesis that no change occurred. In a simulation study, we compare the power of our test with the power of a test which is based on differences of means. The results of the simulation study show that in the case of Gaussian data, our test has only slightly smaller power minus.3pt than the ‘difference‐of‐means’ test. For heavy‐tailed data, our test outperforms the ‘difference‐of‐means’ test.     

Data Dependent Cells Chi‐Square Test With Recurrent Events

We consider a recurrent event wherein the inter‐event times are independent and identically distributed with a common absolutely continuous distribution function F. In this article, interest is in the problem of testing the null hypothesis that F belongs to some parametric family where the q‐dimensional parameter is unknown. We propose a general Chi‐squared test in which cell boundaries are data dependent. An estimator of the parameter obtained by minimizing a quadratic form resulting from a properly scaled vector of differences between Observed and Expected frequencies is used to construct the test. This estimator is known as the minimum chi‐square estimator. Large sample properties of the proposed test statistic are established using empirical processes tools. A simulation study is conducted to assess the performance of the test under parameter misspecification, and our procedures are applied to a fleet of Boeing 720 jet planes' air conditioning system failures.     

An improved test of equality of mean directions for the Langevin‐von Mises‐Fisher distribution

A multi‐sample test for equality of mean directions is developed for populations having Langevin‐von Mises‐Fisher distributions with a common unknown concentration. The proposed test statistic is a monotone transformation of the likelihood ratio. The high‐concentration asymptotic null distribution of the test statistic is derived. In contrast to previously suggested high‐concentration tests, the high‐concentration asymptotic approximation to the null distribution of the proposed test statistic is also valid for large sample sizes with any fixed nonzero concentration parameter. Simulations of size and power show that the proposed test outperforms competing tests. An example with three‐dimensional data from an anthropological study illustrates the practical application of the testing procedure.     

Tests for Coefficients in High‐dimensional Additive Hazard Models

We consider hypothesis testing problems for low‐dimensional coefficients in a high dimensional additive hazard model. A variance reduced partial profiling estimator (VRPPE) is proposed and its asymptotic normality is established, which enables us to test the significance of each single coefficient when the data dimension is much larger than the sample size. Based on the p‐values obtained from the proposed test statistics, we then apply a multiple testing procedure to identify significant coefficients and show that the false discovery rate can be controlled at the desired level. The proposed method is also extended to testing a low‐dimensional sub‐vector of coefficients. The finite sample performance of the proposed testing procedure is evaluated by simulation studies. We also apply it to two real data sets, with one focusing on testing low‐dimensional coefficients and the other focusing on identifying significant coefficients through the proposed multiple testing procedure.     

A resampling‐based test for two crossing survival curves

The area between two survival curves is an intuitive test statistic for the classical two‐sample testing problem. We propose a bootstrap version of it for assessing the overall homogeneity of these curves. Our approach allows ties in the data as well as independent right censoring, which may differ between the groups. The asymptotic distribution of the test statistic as well as of its bootstrap counterpart are derived under the null hypothesis, and their consistency is proven for general alternatives. We demonstrate the finite sample superiority of the proposed test over some existing methods in a simulation study and illustrate its application by a real‐data example.     

Distribution of the two‐sample t‐test statistic following blinded sample size re‐estimation

We consider the blinded sample size re‐estimation based on the simple one‐sample variance estimator at an interim analysis. We characterize the exact distribution of the standard two‐sample t‐test statistic at the final analysis. We describe a simulation algorithm for the evaluation of the probability of rejecting the null hypothesis at given treatment effect. We compare the blinded sample size re‐estimation method with two unblinded methods with respect to the empirical type I error, the empirical power, and the empirical distribution of the standard deviation estimator and final sample size. We characterize the type I error inflation across the range of standardized non‐inferiority margin for non‐inferiority trials, and derive the adjusted significance level to ensure type I error control for given sample size of the internal pilot study. We show that the adjusted significance level increases as the sample size of the internal pilot study increases. Copyright © 2016 John Wiley & Sons, Ltd.     

A win ratio approach to comparing continuous non‐normal outcomes in clinical trials

Clinical trials are often designed to compare continuous non‐normal outcomes. The conventional statistical method for such a comparison is a non‐parametric Mann–Whitney test, which provides a P‐value for testing the hypothesis that the distributions of both treatment groups are identical, but does not provide a simple and straightforward estimate of treatment effect. For that, Hodges and Lehmann proposed estimating the shift parameter between two populations and its confidence interval (CI). However, such a shift parameter does not have a straightforward interpretation, and its CI contains zero in some cases when Mann–Whitney test produces a significant result. To overcome the aforementioned problems, we introduce the use of the win ratio for analysing such data. Patients in the new and control treatment are formed into all possible pairs. For each pair, the new treatment patient is labelled a ‘winner’ or a ‘loser’ if it is known who had the more favourable outcome. The win ratio is the total number of winners divided by the total numbers of losers. A 95% CI for the win ratio can be obtained using the bootstrap method. Statistical properties of the win ratio statistic are investigated using two real trial data sets and six simulation studies. Results show that the win ratio method has about the same power as the Mann–Whitney method. We recommend the use of the win ratio method for estimating the treatment effect (and CI) and the Mann–Whitney method for calculating the P‐value for comparing continuous non‐Normal outcomes when the amount of tied pairs is small. Copyright © 2016 John Wiley & Sons, Ltd.     

Goodness‐of‐Fit based on Downsampling with Applications to Linear Drift Diffusions

Abstract. A goodness‐of‐fit test for continuous‐time models is developed that examines if the parameter estimates are consistent with another for different sampling frequencies. The test compares parameter estimates obtained from estimating functions for downsamples of the data. We prove asymptotic results for stationary and ergodic processes, and apply the downsampling test to linear drift diffusions. Simulations indicate that the test is quite powerful in detecting non‐Markovian deviations from the linear drift diffusions.     

Two‐Sample Bootstrap Hypothesis Tests for Three‐Dimensional Labelled Landmark Data

Abstract. We investigate resampling methodologies for testing the null hypothesis that two samples of labelled landmark data in three dimensions come from populations with a common mean reflection shape or mean reflection size‐and‐shape. The investigation includes comparisons between (i) two different test statistics that are functions of the projection onto tangent space of the data, namely the James statistic and an empirical likelihood statistic; (ii) bootstrap and permutation procedures; and (iii) three methods for resampling under the null hypothesis, namely translating in tangent space, resampling using weights determined by empirical likelihood and using a novel method to transform the original sample entirely within refection shape space. We present results of extensive numerical simulations, on which basis we recommend a bootstrap test procedure that we expect will work well in practise. We demonstrate the procedure using a data set of human faces, to test whether humans in different age groups have a common mean face shape.     

Power Variations and Testing for Co‐Jumps: The Small Noise Approach

In this paper, we study the effects of noise on bipower variation, realized volatility (RV) and testing for co‐jumps in high‐frequency data under the small noise framework. We first establish asymptotic properties of bipower variation in this framework. In the presence of the small noise, RV is asymptotically biased, and the additional asymptotic conditional variance term appears in its limit distribution. We also propose consistent estimators for the asymptotic variances of RV. Second, we derive the asymptotic distribution of the test statistic proposed in (Ann. Stat. 37, 1792‐1838) under the presence of small noise for testing the presence of co‐jumps in a two‐dimensional Itô semimartingale. In contrast to the setting in (Ann. Stat. 37, 1792‐1838), we show that the additional asymptotic variance terms appear and propose consistent estimators for the asymptotic variances in order to make the test feasible. Simulation experiments show that our asymptotic results give reasonable approximations in the finite sample cases.     

Wilcoxon's signed‐rank statistic: what null hypothesis and why it matters

In statistical literature, the term ‘signed‐rank test’ (or ‘Wilcoxon signed‐rank test’) has been used to refer to two distinct tests: a test for symmetry of distribution and a test for the median of a symmetric distribution, sharing a common test statistic. To avoid potential ambiguity, we propose to refer to those two tests by different names, as ‘test for symmetry based on signed‐rank statistic’ and ‘test for median based on signed‐rank statistic’, respectively. The utility of such terminological differentiation should become evident through our discussion of how those tests connect and contrast with sign test and one‐sample t‐test. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.     

Addressing potential prior‐data conflict when using informative priors in proof‐of‐concept studies

Bayesian methods are increasingly used in proof‐of‐concept studies. An important benefit of these methods is the potential to use informative priors, thereby reducing sample size. This is particularly relevant for treatment arms where there is a substantial amount of historical information such as placebo and active comparators. One issue with using an informative prior is the possibility of a mismatch between the informative prior and the observed data, referred to as prior‐data conflict. We focus on two methods for dealing with this: a testing approach and a mixture prior approach. The testing approach assesses prior‐data conflict by comparing the observed data to the prior predictive distribution and resorting to a non‐informative prior if prior‐data conflict is declared. The mixture prior approach uses a prior with a precise and diffuse component. We assess these approaches for the normal case via simulation and show they have some attractive features as compared with the standard one‐component informative prior. For example, when the discrepancy between the prior and the data is sufficiently marked, and intuitively, one feels less certain about the results, both the testing and mixture approaches typically yield wider posterior‐credible intervals than when there is no discrepancy. In contrast, when there is no discrepancy, the results of these approaches are typically similar to the standard approach. Whilst for any specific study, the operating characteristics of any selected approach should be assessed and agreed at the design stage; we believe these two approaches are each worthy of consideration. Copyright © 2015 John Wiley & Sons, Ltd.     

Non parametric multiple comparisons of non nested rival models

The practice for testing homogeneity of several rival models is of interest. In this article, we consider a non parametric multiple test for non nested distributions in the context of the model selection. Based on the linear sign rank test, and the known union–intersection principle, we let the magnitude of the data to give a better performance to the test statistic. We consider the sample and the non nested rival models as blocks and treatments, respectively, and introduce the extended Friedman test version to compare with the results of the test based on the linear sign rank test. A real dataset based on the waiting time to earthquake is considered to illustrate the results.     

Testing circular symmetry

The author addresses the problem of testing circular data for reflective symmetry about an unknown central direction and proposes a simple omnibus test based on the sample second sine moment about an estimation of this direction. Under quite general conditions, for an underlying distribution which is reflectively symmetric, the large‐sample asymptotic distribution of the test statistic is standard normal. Randomization and bootstrap variants of the test are also introduced, and the operating characteristics of different versions of the test are investigated in a Monte Carlo study. The large‐sample and bootstrap versions of the test are applied in the analysis of two illustrative examples drawn from the circular statistics literature.     

A Non‐parametric ANOVA‐type Test for Regression Curves Based on Characteristic Functions

This article studies a new procedure to test for the equality of k regression curves in a fully non‐parametric context. The test is based on the comparison of empirical estimators of the characteristic functions of the regression residuals in each population. The asymptotic behaviour of the test statistic is studied in detail. It is shown that under the null hypothesis, the distribution of the test statistic converges to a finite combination of independent chi‐squared random variables with one degree of freedom. The coefficients in this linear combination can be consistently estimated. The proposed test is able to detect contiguous alternatives converging to the null at the rate n ^{? 1 ∕ 2}. The practical performance of the test based on the asymptotic null distribution is investigated by means of simulations.     

Goodness‐of‐fit Test for Directional Data

In this paper, we study the problem of testing the hypothesis on whether the density f of a random variable on a sphere belongs to a given parametric class of densities. We propose two test statistics based on the L² and L¹ distances between a non‐parametric density estimator adapted to circular data and a smoothed version of the specified density. The asymptotic distribution of the L² test statistic is provided under the null hypothesis and contiguous alternatives. We also consider a bootstrap method to approximate the distribution of both test statistics. Through a simulation study, we explore the moderate sample performance of the proposed tests under the null hypothesis and under different alternatives. Finally, the procedure is illustrated by analysing a real data set based on wind direction measurements.     

Testing parametric models in linear‐directional regression

This paper presents a goodness‐of‐fit test for parametric regression models with scalar response and directional predictor, that is, a vector on a sphere of arbitrary dimension. The testing procedure is based on the weighted squared distance between a smooth and a parametric regression estimator, where the smooth regression estimator is obtained by a projected local approach. Asymptotic behaviour of the test statistic under the null hypothesis and local alternatives is provided, jointly with a consistent bootstrap algorithm for application in practice. A simulation study illustrates the performance of the test in finite samples. The procedure is applied to test a linear model in text mining.     

Non‐parametric Regression Tests Using Dimension Reduction Techniques

Abstract. Testing for parametric structure is an important issue in non‐parametric regression analysis. A standard approach is to measure the distance between a parametric and a non‐parametric fit with a squared deviation measure. These tests inherit the curse of dimensionality from the non‐parametric estimator. This results in a loss of power in finite samples and against local alternatives. This article proposes to circumvent the curse of dimensionality by projecting the residuals under the null hypothesis onto the space of additive functions. To estimate this projection, the smooth backfitting estimator is used. The asymptotic behaviour of the test statistic is derived and the consistency of a wild bootstrap procedure is established. The finite sample properties are investigated in a simulation study.     

An affine‐invariant multivariate sign test for cluster correlated data

The author presents a multivariate location model for cluster correlated observations. He proposes an affine‐invariant multivariate sign statistic for testing the value of the location parameter. His statistic is an adaptation of that proposed by Randles (2000). The author shows, under very mild conditions, that his test statistic is asymptotically distributed as a chi‐squared random variable under the null hypothesis. In particular, the test can be used for skewed populations. In the context of a general multivariate normal model, the author obtains values of his test's Pitman asymptotic efficiency relative to another test based on the overall average. He shows that there is an improvement in the relative performance of the new test as soon as intra‐cluster correlation is present Even in the univariate case, the new test can be very competitive for Gaussian data. Furthermore, the statistic is easy to compute, even for large dimensional data. The author shows through simulations that his test performs well compared to the average‐based test. He illustrates its use with real data.     

Sample size calculation for the one‐sample log‐rank test

In this paper, an exact variance of the one‐sample log‐rank test statistic is derived under the alternative hypothesis, and a sample size formula is proposed based on the derived exact variance. Simulation results showed that the proposed sample size formula provides adequate power to design a study to compare the survival of a single sample with that of a standard population. Copyright © 2014 John Wiley & Sons, Ltd.