使用普查数据模拟MPPS抽样方法的研究

MPPS抽样即多变量与规模成比例的概率抽样,是20世纪90年代才提出来的一种抽样设计。近年来,中国有关部门与美国农业部国家农业署合作,进行了MPPS抽样设计的试点,来解决多目标调查问题。但是MPPS抽样在中国的应用非常有限。对MPPS抽样进行简单的回顾,介绍了它的基本估计,并对其应用进行了数据模拟研究。模拟中采用了系统抽样和泊松抽样的方法,根据实际调查数据得到了明确的结果。还对泊松抽样的一种变形永久随机数抽样的方法进行了模拟研究,并对它的一种误用情况进行了模拟比较,得到了具有说服力的结果。     

Matching Performance of Continuous Sampling Plans with Single Sampling Plans

Single sampling plans are widely used for appraising incoming product quality. However, for situations where a continuous product flow exists, lot-by-lot demarcations may not exist, and it may be necessary to use alternate procedures, such as CSP-1, for continuous processes. In this case, one would like to be able to understand how average performance of the continuous sampling procedures compares to the more commonly used single sampling plans.

In this study, a model is devised which can be used to relate plan performance between single sample lot acceptance procedures and Dodge's(1943) CSP-1 continuous sampling plan. It is shown that it is generally not possible to match up performance based upon operating characteristic curve expressions for the two plans. Instead, the plans are matched by equating expressions for π(p), the long run proportion of product which is accepted, under both procedures. This is shown to be equivalent to matching up properties on an average outgoing quality basis. The methodology may be extended for any derivative plan under MIL-STD-1235B (1982), the military standard for continuous acceptance sampling.     

A Comparison Of Two Adaptive Sampling Designs

Stratified sampling is a technique commonly used for ecological surveys. In this study there appears to be little gain in using a stratified design with adaptive cluster sampling. Two-phase adaptive sampling is preferable to adaptive cluster sampling. Even though two-phase adaptive sampling can give biased estimates, it is found that two-phase adaptive sampling has a lower MSE than adaptive cluster sampling for most populations.     

An Extension of Sampford's Method for Unequal Probability Sampling

Abstract. Sampford's unequal probability sampling method is extended to the case that the inclusion probabilities do not sum to an integer. In this case, the sampling outcome is left open for exactly one randomly chosen unit and that unit gets a new inclusion probability. Three applications are presented. Two of them challenge traditional sampling routines. The simple Pareto sampling design, which was introduced by Rosén in 1997, is also extended. The extended Pareto design is shown to be close to the extended Sampford design.     

Order Sampling Design with Prescribed Inclusion Probabilities

Order sampling with fixed distribution shape is a class of sampling schemes with inclusion probabilities approximately proportional to given size measures. In a recent article, methods were provided to compute the exact first and second order inclusion probabilities numerically when the distribution shape is of the Pareto type. In the same article, procedures were also provided for this case to adjust the parameters to get predetermined inclusion probabilities. In this paper we prove the existence and uniqueness of a solution for the latter problem, in general for any order sampling of fixed distribution shape.     

An efficient non-rejective implementation of the πps sampling designs

Poisson sampling is a method for unequal probabilities sampling with random sample size. There exist several implementations of the Poisson sampling design, with fixed sample size, which almost all are rejective methods, that is, the sample is not always accepted. Thus, the existing methods can be time-consuming or even infeasible in some situations. In this paper, a fast and non-rejective method, which is efficient even for large populations, is proposed and studied. The method is a new design for selecting a sample of fixed size with unequal inclusion probabilities. For the population of large size, the proposed design is very close to the strict πps sampling which is similar to the conditional Poisson (CP) sampling design, but the implementation of the design is much more efficient than the CP sampling. And the inclusion probabilities can be calculated recursively.     

On Sampling with Prescribed Second‐order Inclusion Probabilities

Abstract. Methods to perform fixed size sampling with prescribed second‐order inclusion probabilities are presented. The focus is on a conditional Poisson design of order 2, a CP(2) design. It is an exponential design of quadratic type and it is carefully studied. In particular, methods to find the suitable values of the parameters and methods to sample are described. Small examples illustrate.     

Statistical Education for Engineers: An Initial Task Force Report

This article describes a method for producing size-biased probability samples as originally proposed by Hanurav (1967) and Vijayan (1968). The complexity of the procedure has led to the development of microcomputer software that greatly facilitates the production of sampling plans as well as the computation of population estimates.     

A New Sampling Design for Systematic Sampling

A sampling design called “Modified Systematic Sampling (MSS)” is proposed. In this design each unit has an equal probability of selection. Moreover, it works for both situations: N = nk or N ≠ nk. Consequently, the Linear Systematic Sampling (LSS) and Circular Systematic Sampling (CSS) become special cases of the proposed MSS design.     

Length-biased,with-replacement sampling from an exponential finite population

In this article, we study a statistical model which features a finite population of exponentially distributed values and a length-biased, with-replacement sampling mechanism. This mechanism is such that units compete with one another for selection at each draw. It is shown how inference on a number of quantities can be performed using both frequentist and Bayesian strategies. A Monte Carlo study is used to assess the performance of the proposed point and interval estimators.     

Causal inference in outcome-dependent two-phase sampling designs

Summary.  We consider estimation of the causal effect of a treatment on an outcome from observational data collected in two phases. In the first phase, a simple random sample of individuals is drawn from a population. On these individuals, information is obtained on treatment, outcome and a few low dimensional covariates. These individuals are then stratified according to these factors. In the second phase, a random subsample of individuals is drawn from each stratum, with known stratum-specific selection probabilities. On these individuals, a rich set of covariates is collected. In this setting, we introduce five estimators: simple inverse weighted; simple doubly robust; enriched inverse weighted; enriched doubly robust; locally efficient. We evaluate the finite sample performance of these estimators in a simulation study. We also use our methodology to estimate the causal effect of trauma care on in-hospital mortality by using data from the National Study of Cost and Outcomes of Trauma.     

Two-Stage Cluster Sampling with Ranked Set Sampling in the Secondary Sampling Frame

Motivated by a real-life problem, we develop a Two-Stage Cluster Sampling with Ranked Set Sampling (TSCRSS) design in the second stage for which we derive an unbiased estimator of population mean and its variance. An unbiased estimator of the variance of mean estimator is also derived. It is proved that the TSCRSS is more efficient—in the sense of having smaller variance—than the conventional two-stage cluster simple random sampling in which the second-stage sampling is with replacement. Using a simulation study on a real-life population, we show that the TSCRSS is more efficient than the conventional two-stage cluster sampling when simple random sampling without replacement is used in both stages.     

A perspective of composite sampling

Composite samples are formed by physically mixing samples. Usually, composite samples are used to reduce the overall cost associated with analytical procedures that must be performed on each sample, but they can also be used to protect the privacy of individuals.

Composite sampling can reduce the cost of identifying individual cases that have a certain trait, such as those with a rare disease or those exceeding pollution-level standards. Not much is lost by applying this method as long as the trait is relatively rare.

Composite sampling can reduce the cost of estimating the mean of some process. When samples are composited, the ability to estimate the variance is lost. In spite of this, the potential savings are so great that composite samples have been used.

Much of this paper deasl with the variance of estimators based on composite sampling when the porportions of hte original samples comprising the composite sample are actually random. Taking repeated samples and measurements on several composite samples complicates the prodcedure, but allows the estimation of between and within variation as well as measurement error.     

The Horvitz-Thompson Theorem as a Unifying Perspective for Probability Sampling: With Examples from Natural Resource Sampling

Courses in sampling often lack a coherent structure because many related sampling designs, estimators, variances, and variance estimators are presented as separate cases. The Horvitz-Thompson theorem offers a needed integrating perspective for teaching the methods and fundamental concepts of probability sampling. Development of basic concepts in sampling via this approach provides the student with tools to solve more complicated problems, and helps to avoid some common stumbling blocks of beginning students. Examples from natural resource sampling are provided to illustrate applications and insight gained from this approach.     

Remainder modified systematic sampling in the presence of linear trend

If the population size is not a multiple of the sample size, then the usual linear systematic sampling design is unattractive, since the sample size obtained will either vary, or be constant and different to the required sample size. Only a few modified systematic sampling designs are known to deal with this problem and in the presence of linear trend, most of these designs do not provide favorable results. In this paper, a modified systematic sampling design, known as remainder modified systematic sampling (RMSS), is introduced. There are seven cases of RMSS and the results in this paper suggest that the proposed design is favorable, regardless of each case, while providing linear trend-free sampling results for three of the seven cases. To obtain linear trend-free sampling for the other cases and thus improve results, an end corrections estimator is constructed.     

Systematic and nonrandom sampling in the presence of polynomial trends

In the case of finite populations with low-order polynomial trends present, the use of the least squares regression estimator of the mean is discussed. A sampling scheme, which optimizes the efficiency of the regression estimator over a particular class of schemes, is presented.     

Recursive computation of inclusion probabilities in ranked-set sampling

We derive recursive algorithms for computing first-order and second-order inclusion probabilities for ranked-set sampling from a finite population. These algorithms make it practical to compute inclusion probabilities even for relatively large sample and population sizes. As an application, we use the inclusion probabilities to examine the performance of Horvitz-Thompson estimators under different varieties of balanced ranked-set sampling. We find that it is only for balanced Level 2 sampling that the Horvitz-Thompson estimator can be relied upon to outperform the simple random sampling mean estimator.     

A New Formula for Inclusion Probabilities in Median-Ranked Set Sampling

This article develops a new generalized formula to compute the inclusion probabilities of a median-ranked set sample in a finite population setting. The use of this formula is illustrated in a numerical example. Furthermore, the inclusion probabilities of a median-ranked set sample is compared with the inclusion probabilities of ranked set and simple random samples.     

Spatially correlated Poisson sampling

A new method for sampling from a finite population that is spread in one, two or more dimensions is presented. Weights are used to create strong negative correlations between the inclusion indicators of nearby units. The method can be used to produce unequal probability samples that are well spread over the population in every dimension, without any spatial stratification. Since the method is very general there are numerous possible applications, especially in sampling of natural resources where spatially balanced sampling has proven to be efficient. Two examples show that the method gives better estimates than other commonly used designs.     

Adaptive rejection sampling with fixed number of nodes

The adaptive rejection sampling (ARS) algorithm is a universal random generator for drawing samples efficiently from a univariate log-concave target probability density function (pdf). ARS generates independent samples from the target via rejection sampling with high acceptance rates. Indeed, ARS yields a sequence of proposal functions that converge toward the target pdf, so that the probability of accepting a sample approaches one. However, sampling from the proposal pdf becomes more computational demanding each time it is updated. In this work, we propose a novel ARS scheme, called Cheap Adaptive Rejection Sampling (CARS), where the computational effort for drawing from the proposal remains constant, decided in advance by the user. For generating a large number of desired samples, CARS is faster than ARS.