Addition of runs to a two-level supersaturated design

The purpose of this article is to introduce a new class of extended E(s²)-optimal two level supersaturated designs obtained by adding runs to an existing E(s²)-optimal two level supersaturated design. The extended design is a union of two optimal SSDs belonging to different classes. New lower bound to E(s²) has been obtained for the extended supersaturated designs. Some examples and a small catalogue of E(s²)-optimal SSDs are also included.     

A unified theory for generalized cyclic designs

Properties of abelian groups are used to unify the construction of cyclic and generalized cyclic designs. Necessary and sufficient conditions are obtained for the generation of fractional sets of blocks, and also for the generation of resolvable designs. It is shown how to apply these results in conjunction with efficiency arguments to obtain useful designs.     

D–optimality of a class of saturated main–effect plans and allied results

This paper applies the theory of unimodular matrices to prove that all saturated main effect plans of an s₁ × s₂ factorial are equivalent from the point of view of D–optimality and are hence all D–optimal. The A– and E–optimal plans in this context have also been derived. An application in sequential experimentation has been considered     

Optimal saturated block designs when observations are correlated

A- and MV-optimal block designs are identified in the class of minimally connected designs when the observations within blocks are spatially correlated. All connected designs are shown to be D-equal regardless of the correlation structure, and a sufficient condition for E-optimality is presented. Earlier results for the uncorrelated case are strengthened.     

A note on the connection between uniformity and generalized minimum aberration

Discrete discrepancy has been utilized as a uniformity measure for comparing and evaluating factorial designs. In this paper, for asymmetrical factorials, we give some linkages between uniformity measured by the discrete discrepancy and other criteria, such as generalized minimum aberration (Xu and Wu, 2001) and minimum projection variance (Ai and Zhang, 2004). These close linkages show a significant justification for the discrete discrepancy used to measure uniformity of factorial designs, and provide an additional rationale for using uniform designs. This research was partially supported by the NNSF of China (No. 10441001), the Key Project of Chinese Ministry of Education (No. 105119) and the Project-sponsored by SRF for ROCS (SEM) (No. [2004]176).     

Designs for cropping systems research

The present article establishes equivalence between extended group divisible (EGD) designs and designs for crop sequence experiments. This equivalence has encouraged the agricultural experimenters to use EGD designs for their experimentation. Some real life applications of EGD designs have been given. It has also been shown that several existing association schemes are special cases of EGD association scheme. Some methods of construction of EGD designs are also given. A catalogue of EGD designs obtainable through methods of construction along with efficiency factors of various factorial effects is also presented. In some crop sequence experiments that are conducted to develop suitable integrated nutrient supply system of a crop sequence, the treatments do not comprise of a complete factorial structure. The experimenter is interested in estimating the residual and direct effect of the treatments along with their cumulative effects. For such experimental settings block designs with two sets of treatments applied in succession are the appropriate designs. The correspondence established between row–column designs and block designs for two stage experiments by Parsad et al. [2003. Structurally incomplete row–column designs. Comm. Statist. Theory Methods 32(1), 239–261] has been exploited in obtaining designs for such experimental situations. Some open problems related to designing of crop sequence experiments are also given.     

Interaction balance for symmetrical factorial designs with generalized minimum aberration

There are two different systems of contrast parameterization when analyzing the interaction effects among the factors with more than two levels, i.e., linear-quadratic system and orthogonal components system. Based on the former system and an ANOVA model, Xu and Wu (2001) introduced the generalized wordlength pattern for general factorial designs. This paper shows that the generalized wordlength pattern exactly measures the balance pattern of interaction columns of a symmetrical design ground on the orthogonal components system, and thus an alternative angle to look at the generalized minimum aberration criterion is given. This work is partially supported by NNSF of China grant No. 10231030.     

Characterization of minimum aberration mixed factorials in terms of consulting designs

In this paper, by introducing a concept of consulting design and based on the connection between factorial design theory and coding theory, we obtain combinatorial identities that relate the wordlength pattern of a regular mixed factorial design to that of its consulting design. According to these identities, we further-more establish the general and unified rules for identifying minimum aberration mixed factorial designs through their consulting designs. It is an improvement and generalization of the results in Mukerjee and Wu (2001). This paper is supported by NNSF of China grant No. 10171051 and RFDP grant No. 1999005512.     

Some sufficient conditions for establishing (M,S)-optimality

Two sufficient conditions are given for an incomplete block design to be (M,S- optimal. For binary designs the conditions are (i) that the elements in each row, excluding the diagonal element, of the association matrix differ by at most one, and (ii) that the off-diagonal elements of the block characteristic matrix differ by at most one. It is also shown how the conditions can be utilized for nonbinary designs and that for blocks of size two the sufficient condition in terms of the association matrix can be attained.     

Optimal mixed-level k-circulant supersaturated designs

Supersaturated designs (SSDs) offer a potentially useful way to investigate many factors with only few experiments in the preliminary stages of experimentation. This paper explores how to construct E(_fNOD)$E(f_{\mathrm{NOD}})$-optimal mixed-level SSDs using k-cyclic generators. The necessary and sufficient conditions for the existence of mixed-level k-circulant SSDs with the equal occurrence property are provided. Properties of the mixed-level k  -circulant SSDs are investigated, in particular, the sufficient condition under which the generator vector produces an E(_fNOD)$E(f_{\mathrm{NOD}})$-optimal SSD is obtained. Moreover, many new E(_fNOD)$E(f_{\mathrm{NOD}})$-optimal mixed-level SSDs are constructed and listed. The method here generalizes the one proposed by Liu and Dean [2004. k$k$-circulant supersaturated designs. Technometrics 46, 32–43] for two-level SSDs and the one due to Georgiou and Koukouvinos [2006. Multi-level k-circulant supersaturated designs. Metrika 64, 209–220] for the multi-level case.     

Optimal crossover designs when carryover effects are proportional to direct effects

Crossover designs are used for a variety of different applications. While these designs have a number of attractive features, they also induce a number of special problems and concerns. One of these is the possible presence of carryover effects. Even with the use of washout periods, which are for many applications widely accepted as an indispensable component, the effect of a treatment from a previous period may not be completely eliminated. A model that has recently received renewed attention in the literature is the model in which first-order carryover effects are assumed to be proportional to direct treatment effects. Under this model, assuming that the constant of proportionality is known, we identify optimal and efficient designs for the direct effects for different values of the constant of proportionality. We also consider the implication of these results for the case that the constant of proportionality is not known.     

Run orders for efficient two level experimental plans with minimum factor level changes robust to time trends

In this paper we construct run orders of orthogonal arrays with 12≤n≤28$12\le n\le 28$ runs and 4≤q≤6$4\le q\le 6$ factors that minimize the number of level changes of each factor. The corresponding orthogonal arrays can estimate a model with all main effects and their two factor interactions with the highest efficiency and also provide estimates of all main effects that are independent of linear and quadratic time (or position) trends. Some alternative efficient run orders are also presented when the estimation of two factor interactions is of experimental interest.     

Approximate and exact optimal designs for paired comparisons of partial profiles when there are two groups of factors

For paired comparison experiments involving pairs of multifactor options differing in a specified number of factors the problem of finding optimal designs is considered, when only main effects are to be estimated. It is presumed that the set of factors can be partitioned into two groups such that the number of levels is constant within each group. The optimal designs for this frequently encountered case are also optimal for the corresponding choice experiments under the hypothesis that the parameters in the multinomial logit model are equal to zero.     

Equivalence theorem for Schur optimality of experimental designs

An experimental design is said to be Schur optimal, if it is optimal with respect to the class of all Schur isotonic criteria, which includes Kiefer's criteria of _Φp${\Phi }_p$-optimality, distance optimality criteria and many others. In the paper we formulate an easily verifiable necessary and sufficient condition for Schur optimality in the set of all approximate designs of a linear regression experiment with uncorrelated errors. We also show that several common models admit a Schur optimal design, for example the trigonometric model, the first-degree model on the Euclidean ball, and the Berman's model.     

Design selection criteria for discrimination/estimation for nested models and a binomial response

The aim of an experiment is often to enable discrimination between competing forms for a response model. We investigate the selection of a continuous design for a non-sequential strategy when there are two competing generalized linear models for a binomial response, with a common link function and the linear predictor of one model nested within that of the other. A new criterion, _TE$T_E$-optimality, is defined, based on the difference in the deviances from the two models, and comparisons are made with T$T$-, _Ds$D_s$- and D$D$-optimality. Issues are raised through the study of two examples in which designs are assessed using simulation studies of the power to reject the null hypothesis of the smaller model being correct, when the data are generated from the larger model. Parameter estimation for discrimination designs is also discussed and a simple method is investigated of combining designs to form a hybrid design in order to achieve both model discrimination and estimation. This method has a computational advantage over the use of a compound criterion and the similar performance of the designs obtained from the two approaches is illustrated in an example.     

Optimality of circular neighbor-balanced designs for total effects with autoregressive correlated observations

This paper studies the optimality of circular neighbor-balanced designs (CNBDs) for total effects when the one-sided or two-sided neighbor effects are present in the model and the observation errors are correlated according to a first-order circular autoregressive (AR(1,C$C$)) process. Some optimality results under some specified conditions are provided and the efficiency of a CNBD relative to the optimal block design is investigated. In order to discuss the efficiency of a CNBD among all possible block designs with the same size, the optimal equivalence classes of sequences under the one-sided neighbor effects model are characterized and the efficiencies of CNBDs with blocks of small size are illustrated.     

Uniform coverage designs for mixture experiments

We investigate an optimization problem for mixture experiments. We consider the case when a large number of ingredients are available but mixtures can contain only a few number of ingredients. These conditions are held in experiments for self assembling molecular systems. First, we introduce a concept of uniform coverage design specialized for the situation. Next, we propose to use the stepwise technique for estimating coefficients of third-order Scheffe model which describes a response surface. After that, we propose a method of adding new mixtures for a movement to an extremum region. By this method, additional mixtures of experiments are extremum points of current estimated model and points which lead to more accurate estimation of current model prediction. This methodology is studied numerically for a model constructed from real data.     

MV-optimality standardized through the coefficient of variation

Many of the usual criteria for optimal experimental designs do not take into account the different scale of the variance of the parameters. Dette [1997. Designing experiments with respect to “standardized” optimality criteria. J. Roy. Statist. Soc. Ser. B Stat. Methodol. 59(1), 97–110] provided a standardization based on the efficiencies for estimating each of the parameters. This approach provides designs with similar efficiencies for all of the parameters.     

Exact Designs Minimising the Integrated Variance in Quadratic Regression

Exact designs are given which minimise the average variance of a quadratic regression polynomial fitted by the method of least squares.     

Orthogonally blocked three-level second order designs

Using balanced incomplete block designs with two plots per block, new three-level second order designs involving an arbitrary number of factors are obtained. These designs can easily be blocked orthogonally into blocks of reasonable sizes and are seen to have high D$D$-efficiencies. Orthogonally blocked augmented pairs designs with at most six factors are also constructed.