面板数据模型中随机效应存在性检验的理论研究及其实证分析

 由于能体现异质性等一系列优良性质,面板数据模型正被广泛应用到经济学各个领域中。然而,在反映异质性的个体效应和时间效应的设定上,经常存在人为的主观性和随意性,因此容易导致错误指定事件的发生。本文提出了一个稳健的方法分别检验面板数据模型中随机个体效应和随机时间效应的存在性。具体而言,通过对残差进行正交化变换消去可能存在的时间效应,并建立人工自回归模型,然后基于该模型自回归系数的最小二乘估计构造检验统计量检验个体效应。构造的检验是单边的,零假设下渐近服从标准正态分布。在检验时间效应时,可类似得到统计量及其渐近性质。功效研究表明这些检验敏感性较强,能检测到以参数速度（最快的速度）收敛到零假设的备择假设。通过模拟试验研究了检验统计量的小样本性质,并进行了实际数据分析。     

固定效应模型基于个体LM的新可混合性检验

对固定效应模型,本文基于拉格朗日乘数（LM）原理提出了一种新的可混合性检验。不同于已有的LM型可混合性检验,这里使用每个截面个体的LM统计量构建可混合性检验统计量。数理分析表明,本文所提的方法有着渐进正态性,对于扰动项的异方差和非正态均稳健,且与PY检验（Pesaran&Yamagata,2008）渐近等价。Monte Carlo模拟实验表明,相对于PY检验及另外两种LM型的可混合性检验,对于不同大小的 ,本文提出的方法有着良好的水平表现和更优越的检验势。     

LSTAR-GARCH模型的单位根检验

LSTAR模型的单位根检验往往易忽视其条件方差的时变性,实际上,对许多经济变量尤其是金融变量建立LSTAR模型后,经常发现其条件方差存在GARCH效应。针对LSTAR-GARCH模型的平稳性检验,本文构建了检验统计量tNG,之后在极大似然估计的基础上,推导出tNG的渐近分布,通过蒙特卡洛模拟方法得到该统计量的渐近临界值,并在此基础上研究了tNG检验的检验功效。在与刘雪燕和张晓峒(2009)提出的tNL检验、Ling等(2003)提出的tLG检验以及DF单位根检验进行比较后,发现tNG检验具备明显优势。     

面板数据双因素误差回归模型序列相关和随机效应的联合LM检验

对面板数据双因素误差回归模型构造了检验序列相关和随机效应的一种联合LM检验,发现该LM统计量也是检验联合假设H0：σμ^2=λ=0的Baltagi-Li LM统计量和检验假设H0：σv^2=λ=0的Breusch-Pagan-LM统计量之和。当面板数据的个体数N充分大时,该联合LM统计量的渐近分布是χ^2（3）分布;无论双因素误差面板数据回归模型的剩余误差项是AR（1）过程还是MA（1）过程,联合LM检验是相同的,即对随机效应和一阶序列相关的联合LM检验是独立于序列相关的形式。     

内生初始假定下动态空间固定效应模型的拟极大似然估计

 本文提出了基于初始值为内生确定下的动态空间固定效应模型,综合考虑了可直接观测和不可直接观测或无法观测的空间效应;推导了模型参数拟极大似然估计量具有的渐近性质及其渐近分布。对参数估计量性质的模拟检验结果表明,似然估计量的渐近性质随着样本容量的增加而改善,且其改善程度对时间维度变化较对空间维度变化更为敏感,在空间单元限定情形下有效增加时间维度可以显著改善估计量性质。中国省域经济收敛性的实证案例分析结果显示,本文构建的综合考虑双重空间结构的空间计量模型具有适用性和合理性。     

空间误差分量模型的Bootstrap LM检验

空间误差分量模型(Spatial Error Components,SEC)传统的空间相关性LM检验存在严重的水平扭曲和较低的检验功效,导致检验统计量失效.文章将Bootstrap方法应用于SEC模型的空间相关性LM检验,提高检验统计量的有效性.Monte Carlo模拟实验表明,Bootstrap LM检验的水平受误差项分布、空间权重矩阵和样本量影响较小,并且远优于渐近LM检验,具有理想的检验水平;渐近LM检验和Bootstrap LM检验的功效均随着空间相关性的增强,及样本量的增大而增大,但Bootstrap LM检验在各种情形下均具有更高的检验功效,尤其是样本量较小时.简言之,Bootstrap LM检验是SEC模型更为优越的空间相关性检验方法.     

STAR模型中的递归退势单位根检验研究

在STAR模型框架下,考虑时间序列具有线性确定性趋势成分,本文建立了一个递归退势单位根检验统计量,推导了其渐近分布;并在考虑初始条件情形下,对递归退势、OLS和GLS退势单位根检验统计量的有限样本性质进行了细致的比较研究。若忽略初始条件的影响,GLS退势和递归退势单位根检验统计量的检验势都显著高于OLS退势。随着初始条件的增大,GLS退势单位根检验统计量的检验势下降得比较厉害,递归退势单位根检验统计量的检验势较为稳定,且在样本量较大情形下更具优势。     

因子模型门槛效应的LM和Wald检验及其统计性质研究

门槛因子模型可以有效地刻画高维度时间序列的共变特征和区制转换行为,具有良好的可解释性和预测能力。针对因子载荷矩阵存在的门槛效应,本文提出了拉格朗日乘子和沃尔德检验方法,并给出了渐近分布,相关结果表明以上检验统计量具有良好的大样本性质和有限样本表现。在实证部分,以我国股市的行业指数作为研究对象,通过构建门槛因子模型来刻画我国股票市场波动的共变性特征和非对称效应。实证结果表明基于门槛因子模型可以很好地刻画中国股市行业收益率波动的共变特征和区制转换行为。     

数据初始值对DF类IPS检验势的影响研究

 本文研究了DF类面板数据单位根IPS检验势受时序数据初始值的影响,推导了DF类面板单位根IPS检验统计量在局部备择假设下的极限分布和局部渐近势函数,发现了DF类面板数据单位根IPS检验统计量局部渐近势在异质性局部备择假设下是初始条件的单调递增函数;小样本Monte Carlo模拟分析结果表明,若假设初始条件为零,DF类IPS统计量的检验势将被低估。     

协整参数的自举推断

 针对完全修正最小二乘(full-modified ordinary least square,简称FMOLS）估计方法,给出一种协整参数的自举推断程序,证明零假设下自举统计量与检验统计量具有相同的渐近分布。关于检验功效的研究表明,虽然有约束自举的实际检验水平表现良好,但如果零假设不成立,自举统计量的分布是不确定的,因而其经验分布不能作为检验统计量精确分布的有效估计。实际应用中建议使用无约束自举,因为无论观测数据是否满足零假设,其自举统计量与零假设下检验统计量都具有相同的渐近分布。最后,利用蒙特卡洛模拟对自举推断和渐近推断的有限样本表现进行比较研究。     

Estimation of Fuel Coefficients of Cement Production: A Fixed-Effects Approach to Nonlinear Regression

Fuel coefficients of cement production—one for each process of production—are estimated by explicitly accounting for the multiple-kiln structure of cement plants. Unobserved heterogeneity across plants is found to be significant. Furthermore, since the estimable model is nonlinear in exogenous variables and parameters, a fixed-effects estimator for nonlinear regression is used to obtain the estimates.     

Job-Match Quality as an Error Component and the Wage-Tenure Profiler A Comparison and Test of Alternative Estimators

The job-matching hypothesis implies that the disturbance of the standard-wage equation is correlated with one of the regressors, tenure, causing an overestimation of the effect of tenure on wages. This hypothesis is tested and consistent estimates of wage-equation parameters obtained using the methods of Hausman (1978). The approach treats job-match quality as a component of the disturbance term, and an error-components estimator is compared to a modified fixed-effects estimator. The results reject the hypothesis of no correlation between the disturbance term and tenure, but the estimated value of the tenure effect is contrary to the matching model. Other models that may be consistent with these results are discussed.     

Identification of parametric Rasch-type models

In modern Item Response Theory, the Rasch model is viewed as a Generalized Linear Mixed Model, where the item parameters correspond to the fixed-effects, whereas the person specific parameters are the random-effects. The statistical model, bearing on the observable variables only, is obtained after integrating out the random-effects. Although it is widely accepted that the parameters of this model are identified, it is hard to find a correct justification. Furthermore, the meaning of the parameters of the Rasch model – as well as of its extensions – is typically based on the fixed-effects specification of the model, that is, when the person specific parameters are also treated as fixed-effects. The contribution of this paper is to provide an explicit proof of the identification of the random-effects Rasch model. The proof is valid for a large class of Rasch-type models. It is also shown that such a proof can be applied to analyze the identification of Explanatory Rasch Models. Finally, the meaning of the parameters of interest with respect to the different data generating process is discussed.     

Conditional mix-GEE models for longitudinal data with unspecified random-effects distributions

In the longitudinal studies, the mixture generalized estimation equation (mix-GEE) was proposed to improve the efficiency of the fixed-effects estimator for addressing the working correlation structure misspecification. When the subject-specific effect is one of interests, mixed-effects models were widely used to analyze longitudinal data. However, most of the existing approaches assume a normal distribution for the random effects, and this could affect the efficiency of the fixed-effects estimator. In this article, a conditional mixture generalized estimating equation (cmix-GEE) approach based on the advantage of mix-GEE and conditional quadratic inference function (CQIF) method is developed. The advantage of our new approach is that it does not require the normality assumption for random effects and can accommodate the serial correlation between observations within the same cluster. The feature of our proposed approach is that the estimators of the regression parameters are more efficient than CQIF even if the working correlation structure is not correctly specified. In addition, according to the estimates of some mixture proportions, the true working correlation matrix can be identified. We establish the asymptotic results for the fixed-effects parameter estimators. Simulation studies were conducted to evaluate our proposed method.     

Interval estimation of parameters in an unbalanced mixed two-fold nested classification-the last-stage uniformity case

A procedure for the construction of exact simultaneous confidence intervals on functions of the fixed-effects parameters and on functions of variance components in an unbalanced, mixed, two-fold nested classification is introduced. The type of model considered in this paper enables the construction of such intervals to be based on the corresponding ANOVA table using its mean square ratios.     

Parametric Analysis for Matched Pair Survival Data

Hougaard's (1986) bivariate Weibull distribution with positive stable frailties is applied to matched pairs survival data when either or both components of the pair may be censored and covariate vectors may be of arbitrary fixed length. When there is no censoring, we quantify the corresponding gain in Fisher information over a fixed-effects analysis. With the appropriate parameterization, the results take a simple algebraic form. An alternative marginal (independence working model) approach to estimation is also considered. This method ignores the correlation between the two survival times in the derivation of the estimator, but provides a valid estimate of standard error. It is shown that when both the correlation between the two survival times is high, and the ratio of the within-pair variability to the between-pair variability of the covariates is high, the fixed-effects analysis captures most of the information about the regression coefficient but the independence working model does badly. When the correlation is low, and/or most of the variability of the covariates occurs between pairs, the reverse is true. The random effects model is applied to data on skin grafts, and on loss of visual acuity among diabetics. In conclusion some extensions of the methods are indicated and they are placed in a wider context of Generalized Estimating Equation methodology.     

Optimal designs for multivariate logistic mixed models with longitudinal data

This paper considers the optimal design problem for multivariate mixed-effects logistic models with longitudinal data. A decomposition method of the binary outcome and the penalized quasi-likelihood are used to obtain the information matrix. The D-optimality criterion based on the approximate information matrix is minimized under different cost constraints. The results show that the autocorrelation coefficient plays a significant role in the design. To overcome the dependence of the D-optimal designs on the unknown fixed-effects parameters, the Bayesian D-optimality criterion is proposed. The relative efficiencies of designs reveal that both the cost ratio and autocorrelation coefficient play an important role in the optimal designs.     

Fixed-Effects Modeling of Cohen's Kappa for Bivariate Multinomial Data

Cohen's kappa statistic is the conventional method that is used widely in measuring agreement between two responses when they are categorical. In this article, we develop a fixed-effects modeling of Cohen's kappa for bivariate multinomial data which reduces to Cohen's kappa under certain conditions and hence can be considered as a generalization of the conventional Cohen's kappa. Also, this method can easily be adapted as a generalization of Cohen's weighted kappa. Properties of the proposed method are provided. Large sample performance is investigated through bootstrap simulation studies followed by two illustrative examples.     

Bias-Corrected Estimation in Dynamic Panel Data Models

This study develops a new bias-corrected estimator for the fixed-effects dynamic panel data model and derives its limiting distribution for finite number of time periods, T, and large number of cross-section units, N. The bias-corrected estimator is derived as a bias correction of the least squares dummy variable (within) estimator. It does not share some of the drawbacks of recently developed instrumental variables and generalized method-of-moments estimators and is relatively easy to compute. Monte Carlo experiments provide evidence that the bias-corrected estimator performs well even in small samples. The proposed technique is applied in an empirical analysis of unemployment dynamics at the U.S. state level for the 1991–2000 period.     

Estimation of partially specified spatial panel data models with fixed-effects

This article extends the spatial panel data regression with fixed-effects to the case where the regression function is partially linear and some regressors may be endogenous or predetermined. Under the assumption that the spatial weighting matrix is strictly exogenous, we propose a sieve two stage least squares (S2SLS) regression. Under some sufficient conditions, we show that the proposed estimator for the finite dimensional parameter is root-N consistent and asymptotically normally distributed and that the proposed estimator for the unknown function is consistent and also asymptotically normally distributed but at a rate slower than root-N. Consistent estimators for the asymptotic variances of the proposed estimators are provided. A small scale simulation study is conducted, and the simulation results show that the proposed procedure has good finite sample performance.