Some new construction of circular weakly balanced repeated measurements designs in periods of two different sizes

Abstract

Balanced repeated measurements designs (RMDs) balance out the residual effects. Williams Latin square designs work as minimal combinatorial balanced as well as variance balanced for RMDs for p (period sizes) = v (number of treatments). If minimal balanced RMDs cannot be constructed for the situations where p must be less than v then weakly balanced RMDs should be preferred. In this article, some generators are developed to generate circular weakly balanced RMDs in periods of two different sizes. To obtain the proposed designs, some construction procedures are also described for some of the cases where we could not develop generators.     

Minimal circular strongly balanced repeated measurements designs in periods of three different sizes

Repeated measurements designs (RMD) are widely used in medicine, pharmacology, animal sciences, and psychology. If there is a restriction on the total number of treatments, some experimental units can receive on the total length of time while some experimental units can remain in the trial, then RMD in periods of unequal sizes should be used. In this article, some infinite series are developed to generate the minimal circular strongly balanced RMD in periods of three different sizes p₁, p₂, and p₃, where 2 ≤ p₃ < p₂ ≤ 10.     

Circular balanced repeated measurement designs in periods of three different sizes

Abstract

Repeated measurement designs are widely used in medicine, pharmacology, animal sciences and psychology. If there is a restriction on the total number of treatments, some experimental units can receive on the total length of time while some experimental units can remain in the trial, then repeated measurements designs with unequal period sizes should be used. In this article, some infinite series are developed to generate the minimal balanced repeated measurement designs in periods of three different sizes p₁, p₂ and p₃, where 2?≤?p₃?<?p₂ ≤ 10 and p₂?<?p₁.     

Construction of circular partially balanced-Repeated measurement designs using cyclic shifts

Repeated measurement designs are widely used in medicine, pharmacology, animal sciences and psychology. These designs balance out the residual effects. The situations where balanced repeated measurements designs require a large number of the subjects, partially-balanced repeated measurements designs should be used. In this paper some infinite series are developed which provide circular partially-balanced repeated measurement designs for p (periods) even. Catalogues of circular partially-balanced repeated measurement designs are also presented for v (treatments) ≤ 100 with p = 5, 7 & 9.     

Construction of repeated measurements designs strongly balanced for residual effects

Abstract

Repeated Measurements Designs have been widely used in agriculture, animal husbandry, education, biology, botany and engineering. Balanced or strongly balanced repeated measurements designs are useful to balance out the residual effects. In this article, some new generators and construction procedures are proposed to obtain circular strongly balanced repeated measurements designs in periods of (a) equal sizes, (b) two different sizes, and (c) three different sizes.     

Some extensions of circular balanced and circular strongly balanced repeated measurements designs

Repeated measurement designs are widely used in medicine, pharmacology, animal sciences, and psychology. In this paper the works of Iqbal and Tahir (2009 Iqbal, I., and M. H. Tahir. 2009. Circular strongly balanced repeated measurements designs. Communications in Statistics—Theory and Methods 38:3686–96.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) and Iqbal, Tahir, and Ghazali (2010 Iqbal, I., M. H. Tahir, and S. S. A. Ghazali. 2010. Circular first- and second-order balanced repeated measurements designs. Communications in Statistics—Theory and Methods 39:228–40.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) are generalized for the construction of circular-balanced and circular strongly balanced repeated measurements designs through the method of cyclic shifts for three periods.     

Minimal circular balanced repeated measurement designs in unequal period sizes

Abstract

Repeated measurement designs (RMDs) are widely used in medicine, pharmacology, animal sciences and psychology. In these fields, there are several situations where these designs should be used in periods of different sizes. With the use of RMD, residual effects or carry over effects may arise and balanced RMDs are solution to this problem. In this article, therefore, some infinite series are developed through method of cyclic shifts to obtain circular balanced repeated measurements designs in periods of two different sizes.     

Optimal repeated measurements designs for comparing test treatments with a control

A-optimal and mv optimal repeated measurments designs for comparing serveral test treatments with a control are considered. the models considered are basically of two types: without preperides and the cirular model. It is shown known that some known strongly balanced uniform repeated measurements designs can be modified to obtain optimal designs for this problem. Some other methods of finding optimal designs are also given.     

TABLES OF SMALL OPTIMAL REPEATED MEASUREMENTS DESIGNS

This paper presents tables of the optimal repeated measurements designs for the estimation of direct effects and of residual effects for a model with independent errors, for up to n = 10 experimental units, for t= 2 treatments and p= 2, 3 or 4 periods, and for t= 3 treatments and p= 2 or 3 periods.     

Circular First- and Second-Order Balanced Repeated Measurements Designs

Sharma (1977 Sharma , V. K. ( 1977 ). Change-over designs with complete balance for first and second order residual effect . Canad. J. Statist. 5 : 121 – 132 .[Crossref] , [Google Scholar]) and Aggarwal et al. (2006 Aggarwal , M. L. , Deng , L.-Y. , Jha , M. K. ( 2006 ). Balanced residual treatment effects designs of first and second order . Statist. Probab. Lett. 76 : 597 – 600 .[Crossref], [Web of Science ®] , [Google Scholar]) considered non circular construction of first- and second-order balanced repeated measurements designs. Sharma et al. (2002 Sharma , V. K. , Varghese , C. , Jaggi , S. ( 2002 ). On optimality of change-over designs balanced for first and second order residual effects . Metron 60 : 153 – 162 . [Google Scholar]) constructed circular first- and second-order balanced repeated measurements designs only for a class with parameters (v, p = 3n, n = v ²) and also showed its universal optimality. In this article, we consider circular construction of first- and second-order balanced repeated measurements designs and strongly balanced repeated measurements designs by using the method of cyclic shifts. Some new circular designs with parameters (v, p, n) for cases p = v, p < v and p > v are given.     

Repeated measurements designs with unequal period sizes

Summary This paper is concerned with the designs in which each experimental unit is assigned more than once to a treatment, either different or identical. An easy method of constructing balanced minimal repeated measurements designs with unequal period sizes is presented whenever the number of periods is less than the number of treatments. Strongly balanced minimal repeated measurements designs with unequal period sizes are also constructed whenever the number of periods is less than the number of treatments.     

Designs with Repeated Measurements on Any Number of Units over Varying Periods

In the usual repeated measurements designs (RMDs), the subjects are all observed for the same number of periods and the optimum RMDs require specified numbers of subjects, usually depending on the number of treatments to be used. In practice, it is sometimes not feasible to meet these requirements. To overcome this problem, alternative designs are suggested where any number of available subjects may be used and they may be observed for different periods. These designs are based on suitable serially balanced sequences which are shown to be optimal. Moreover, besides the usual direct and residual effects, the model considered has an extra term due to the interaction effect between them. The recommended designs are universally optimal in a very general class.     

Non binary partially neighbor balanced designs for circular blocks

ABSTRACT

Neighbor designs are recommended for the cases where the performance of treatment is affected by the neighboring treatments as in biometrics and agriculture. In this paper we have constructed two new series of non binary partially neighbor balanced designs for v = 2n and v = 2n+1 number of treatments, respectively. The blocks in the design are non binary and circular but no treatment is ever a neighbor to itself. The designs proposed here are partially balanced in terms of nearest neighbors. No such series are known in the literature.     

An infinite class of PBIB designs

In this paper, an infinite class of partially balanced incomplete block (PBIB) designs of m+1 associate classes is constructed through the use of a series of row-orthogonal matrices known as partially balanced orthogonal designs (PBOD) of m-associate classes. For the purpose, a series of PBOD is obtained through a method described herein. An infinite class of regular GD designs is also reported.     

Designs balanced for circular residual effects

Magda (1980) introduced a model for repeated measurements designs with a circular structure of the residual effects. He proved the universal optimality of circular balanced uniform designs over a subclass of the possible designs. We strengthen his result to optimality over the set of all designs with the same number of experimental units, periods and treatments.     

Circular balanced repeated measurements designs

The concept of a circular design is defined and when proper balance for various effects is assumed, its universal optimality is proved over the class of all designs with the same set of parameters, Such designs are shown to minimize the variance of the best linear unbiased estimators of contrasts of residual and direct effects over the class of equireplicated designs. All models assume first order residual effects and are of a circular nature. The proofs are presented in a unified manner for several models at a time. They are based on certain matrix domination which occurs when parameters are eliminated from a linear modelj this latter fact is proved for a general linear model.     

Construction of neighbor designs of block size 4 for all values of v ≥ 5 by using the method of addition

In this article, a general method of construction of neighbor block designs is given. The designs are constructed using variation of a simple method which we refer to as the method of addition (renamed as the method of cyclic shifts). We give complete solution of neighbor balanced designs for k = 4 for any value of v. We also give many series of generalized neighbor designs (GNDs). In the last section, we have constructed GNDs in a sequential manner (as Did John 1981) for v ≤ 50 and r is multiple of k.     

COMPUTER-AIDED CONSTRUCTION OF SMALL (M, S)-OPTIMAL INCOMPLETE BLOCK DESIGNS

A new exchange algorithm for the construction of (M, S)-optimal incomplete block designs (IBDS) is developed. This exchange algorithm is used to construct 973 (M, S)-optimal IBDs (v, k, b) for v= 4,…,12 (varieties) with arbitrary v, k (block size) and b (number of blocks). The efficiencies of the “best” (M, S)-optimal IBDs constructed by this algorithm are compared with the efficiencies of the corresponding nearly balanced incomplete block designs (NBIBDs) of Cheng(1979), Cheng & Wu (1981) and Mitchell & John(1976).     

Some New Series of Partially Balanced Residual Treatment Effects Designs

Blaisdell and Raghavarao (1980 Blaisdell , E. A. , Raghavarao , D. ( 1980 ). Partially balanced change-over designs based on m-associate class PBIB designs . JRSS B 42 : 334 – 338 . [Google Scholar] 1985 Blaisdell , E. A. , Raghavarao , D. ( 1985 ). Efficiency bounds for partially balanced change-over designs based on m-associate class PBIB designs . JRSS B 47 : 132 – 135 . [Google Scholar]) introduced partially balanced residual treatment effects designs and gave methods of construction of these designs. They also gave efficiencies for the estimated direct and residual elementary treatment contrasts of these designs. In this paper, we construct some new series of partially balanced residual treatment effects designs and also give their efficiencies for the estimated direct and residual elementary treatment contrasts.