基于ANSYS的压力容器表面凹坑缺陷安全评定分析

采用通用有限元程序ANSYS建立了移动式压力容器筒体外壁表面凹坑（轴向和周向）的有限元模型。结合筒体表面凹坑的应力理论计算，研究探讨了在恒定内压下，筒体表面凹坑缺陷处的应力分布与凹坑几何尺寸之间的关系。以第三强度理论作为仿真终止判据，获取凹坑各几何参量的阈值，利用MATLAB对阈值进行最小二乘拟合，绘制出凹坑缺陷的安全评估参考曲线。拟合结果表明：轴向和周向凹坑对筒体局部结构强度的影响不同，对应的安全评估参考曲线存在区别。     

On the α-risks for shewhart control charts

The performance of the usual Shewhart control charts for monitoring process means and variation can be greatly affected by nonnormal data or subgroups that are correlated. Define the α_k-risk for a Shewhart chart to be the probability that at least one “out-of-control” subgroup occurs in k subgroups when the control limits are calculated from the k subgroups. Simulation results show that the α_k-risks can be quite large even for a process with normally distributed, independent subgroups. When the data are nonnormal, it is shown that the α_k-risk increases dramatically. A method is also developed for simulating an “in-control” process with correlated subgroups from an autoregressive model. Simulations with this model indicate marked changes in the α_k-risks for the Shewhart charts utilizing this type of correlated process data. Therefore, in practice a process should be investigated thoroughly regarding whether or not it is generating normal, independent data before out-of-control points on the control charts are interpreted to be due to some real assignable cause.     

NONPARAMETRIC TWO SAMPLE TESTS BASED ON AREA STATISTICS

ABSTRACT

Area statistics are sample versions of areas occurring in a probability plot of two distribution functions F and G. This paper presents a unified basis for five statistics of this type. They can be used for various testing problems in the framework of the two sample problem for independent observations, such as testing equality of distributions against inequality or testing stochastic dominance of distributions in one or either direction against nondominance. Though three of the statistics considered have already been suggested in literature, two of them are new and deserve our interest. The finite sample distributions of the statistics (under F=G) can be calculated via recursion formulae. Two tables with critical values of the new statistics are included. The asymptotic distribution of the properly normalized versions of the area statistics are functionals of the Brownian bridge. The distribution functions and quantiles thereof are obtained by Monte Carlo simulation. Finally, the power functions of the two new tests based on area statistics are compared to the power functions of the tests based on the corresponding supremum statistics, i.e., statistics of the Kolmogorov–Smirnov type.     

The Continuum of Care System

Abstract

The Continuum of Care System is a Decision Support System designed to assist social workers responsible for identifying and selecting alternative living arrangements for children unable to remain in their own families. The Continuum of Care System consists of two software packages called MATCH and PROFILE. MATCH produces a rank-ordered list of prospective placement alternatives by statistically comparing an individual child to groups of children previously admitted into different residential facilities. PROFILE summarizes the characteristics and problems of children at each facility in the system.     

A generalization of the compound rayleigh distribution: using a bayesian method on cancer survival times

In this paper the generalized compound Rayleigh model, exhibiting flexible hazard rate, is high¬lighted. This makes it attractive for modelling survival times of patients showing characteristics of a random hazard rate. The Bayes estimators are derived for the parameters of this model and some survival time parameters from a right censored sample. This is done with respect to conjugate and discrete priors on the parameters of this model, under the squared error loss function, Varian's asymmetric linear-exponential (linex) loss function and a weighted linex loss function. The future survival time of a patient is estimated under these loss functions. A Monte Carlo simu¬lation procedure is used where closed form expressions of the estimators cannot be obtained. An example illustrates the proposed estimators for this model.     

试论民族地区普通中学多媒体课件制作及管理

运用现代教育技术提高教学效率是民族地区普通中学发展的必由之路。只有正确认识民族地区普通中学教育技术应用的背景,加强对此类教学资源的管理,才能使之更好服务于教学,提高民族地区教学实践活动的效率。     

基于视觉行为的手机新闻App图文布局设计研究

通过实例总结出手机新闻App的三种基础图文布局结构,即左图右文式、左文右图式和上文下图式布局。以图文布局结构的客观评价为目的,从视觉搜索和视觉浏览规律的角度,分析了手机新闻App图文布局结构对用户阅读效率的影响。运用眼动仪对三种图文布局方案进行了实验评价与分析。通过注视轨迹、注视热点、注视点数量和搜索时间,研究不同图文布局方案下视觉浏览和视觉搜索的眼动规律。实验发现用户使用手机新闻App呈现文字导向型的视觉浏览规律,上文下图式图文布局的视觉搜索效率最高。研究结论可为手机新闻App图文布局设计提供科学的参考依据。     

基于正交试验的长条薄壁板件注塑工艺参数优化与定量分析

针对塑件成型过程中体积收缩率对成型塑件尺寸精度的影响,文章选取长条薄壁板件作为研究对象,利用AMI有限元分析软件对长条薄壁板注塑成型过程进行数值模拟,采用多因素交互正交试验的方法获得常用ABS塑料在不同的工艺参数下成型薄壁件的体积收缩率。以体积收缩率为研究目标,对试验结果进行定量分析,对比分析每一个工艺参数对研究目标的贡献率,并计算得到最优的工艺参数组合,依据实验结果优化塑件成型工艺。该方法的应用为注塑成型工艺参数优化提供了定量的数据参考,是一种快速而实用的方法。     

食品检测咀嚼机器人工作空间研究

为了提高食品检测效率,改善食品检测精度,增加食品检测的客观性,文章介绍了一种基于6-UPS机构的咀嚼机器人,介绍了咀嚼机器人的结构原理,求解了机构的运动学逆解,分析了机构的工作空间影响因素,利用MATLAB编程求得机构在定姿态下的工作空间。空间轮廓图表明,该机构在定姿态下能到达人类全部真实咀嚼空间,机构设计可靠,能够模拟人类咀嚼行为对食品进行检测。