GTEM Cell的坐标变换分析

文献［１］提出用坐标变换将ＧＴＥＭｃｅｌｌ变换成均匀矩形偏心同轴线，然后用数值方法求解场分布，但是其变换后的二阶偏微分方程存在错误。文中经过严格的推导，获得了正确的结果，纠正了文献［１］中的错误。     

一种双层小区结构中的切换控制策略

在宽带码分多址双层小区结构系统中提出了一种基于小区覆盖范围和信号能干比判决的切换策略,切换策略使用了基于概率的动态资源预留方案,即在切换时,如果系统中没有空闲资源,则对切换呼叫进行排队。通过仿真表明,该切换策略相对于采用固定资源预留的切换策略,在轻负荷的条件下对话音呼叫的阻塞概率有一定的改善。     

养殖大菱鲆血细胞形态和相关生理指标的测定

研究了大菱鲆血细胞的类型、形态以及血液生理学指标.大菱鲆的血细胞可区分为红细胞、淋巴细胞、单核细胞、嗜中性粒细胞和血栓细胞5种类型,没有发现嗜酸性粒细胞和嗜碱性粒细胞.在白细胞中,血栓细胞和小淋巴细胞较小,嗜中性粒细胞和单核细胞较大.血细胞计数测得红细胞密度为(2.73±0.22)×106个/mm3,白细胞密度为(1.79±0.25)×104个/mm3.淋巴细胞、单核细胞、嗜中性粒细胞和血栓细胞在白细胞中所占的比例分别为:(24.72±6.26)%,(5.26±1.95)%,(13.45±3.31)%和(56.60±9.52)%.血红蛋白含量为(6.63±0.58)g/100mL,红细胞渗透脆性为(0.38±0.04)%NaCl,凝血时间为(80±12)s.     

用求荷载控制段的方法确定临界荷载

提出在移动荷载组作用下求简支梁内某一指定截面的最大弯矩的一种解法，这种解法的关键是求出梁上各个荷载的控制段．     

塑料注射机节能问题的研究与探讨

本文针对 XS—ZY—125型塑料注射成型机,分析了现行通用的双联泵供油液压系统耗能大的原因。介绍了压力流量补偿负荷传感液压系统在注射机上应用的基本原理。通过应用上述两种液压系统分别驱动同一台注射机的生产运行对比试验和能耗测试分析,证明压力流量补偿负荷传感液压系统具有十分显著的节能效果。通过经济效益估算分析,指出进一步开发压力流量补偿负荷传感液压系统在注射机上的应用,不仅具有十分显著的经济效益,而且具有很大的社会效益。     

浅谈UPS的使用与维护

UPS意为“不间断供电电源”,对保护负载设备有重要作用。使用和维护UPS时,要根据负载合理选用UPS类型;UPS不宜长期处于满载或过度轻载状态下运行;要正确使用和维护UPS系统内的蓄电池;做好UPS电源线和通信线的防雷过压保护;要在UPS电源前科学加装交流稳压器;要定期对UPS进行检查和放电。     

The analysis of some biological data

This paper considers the building of stochastic models and the related analysis of discrete data in two biological problems, The first arises from the reproduction of yeast cells, while the secondis concerned with the aggregation of nucleoli. Galton-Watson and aggregation models are constructed for the respective processes and their goodness of fit to the data tested     

基于FLOTRAN的燕尾形导轨气浮平台结构设计

闭式燕尾形导轨是常见的静压气浮导轨结构形式之一,其燕尾角度将直接影响导轨的承载能力,为保证设计的燕尾形导轨能满足工作要求,本文通过建立燕尾夹角在55°~70°范围变化的气膜有限元模型,以承载力和刚度作为主要性能指标,对导轨承载能力进行分析.通过分析发现:导轨垂直方向总承载力随着燕尾夹角θ的增大而增大.研究结果表明燕尾夹角θ=66°时,单边导轨垂直方向的承载力为87.26N,刚度为33.69N/μm,能较好地满足承载和工作要求.     

Topological Performance Measures as Surrogates for Physical Flow Models for Risk and Vulnerability Analysis for Electric Power Systems

Critical infrastructure systems must be both robust and resilient in order to ensure the functioning of society. To improve the performance of such systems, we often use risk and vulnerability analysis to find and address system weaknesses. A critical component of such analyses is the ability to accurately determine the negative consequences of various types of failures in the system. Numerous mathematical and simulation models exist that can be used to this end. However, there are relatively few studies comparing the implications of using different modeling approaches in the context of comprehensive risk analysis of critical infrastructures. In this article, we suggest a classification of these models, which span from simple topologically‐oriented models to advanced physical‐flow‐based models. Here, we focus on electric power systems and present a study aimed at understanding the tradeoffs between simplicity and fidelity in models used in the context of risk analysis. Specifically, the purpose of this article is to compare performance estimates achieved with a spectrum of approaches typically used for risk and vulnerability analysis of electric power systems and evaluate if more simplified topological measures can be combined using statistical methods to be used as a surrogate for physical flow models. The results of our work provide guidance as to appropriate models or combinations of models to use when analyzing large‐scale critical infrastructure systems, where simulation times quickly become insurmountable when using more advanced models, severely limiting the extent of analyses that can be performed.     

变载荷对45钢摩擦副摩擦磨损性能的影响

针对实际工况中,45钢是在有润滑的状态下工作,且所受的载荷是变化的情况,课题组在自行改装的MMS-2A型多功能摩擦磨损试验机上采用环一块接触摩擦方式进行了实验,研究了在油润滑状态下变载荷对45钢摩擦副摩擦磨损性能的影响,与干摩擦条件下的磨损性能进行对比;并对45钢磨损表面进行了观察。结果表明：干摩擦和油润滑状态下的45钢摩擦副的摩擦因数呈现不同的变化趋势;油润滑条件下的磨损量比干摩擦条件下的磨损量要小很多;在油润滑条件下,45钢的磨损机理主要表现为磨粒磨损和疲劳剥落。研究验证了油润滑的存在有助于改善材料的耐磨性。