40Cr摆动滑块热处理工艺的改进

对截面尺寸较大、结构复杂的40Cr钢件采用常规热处理工艺变形大，难于满足技术要求,经过工艺改进：受只了亚；淬火工艺，结果表明：亚温淬火工艺在保证原工件性能的情况下，显著减小了淬火变形，避免了开裂，降低了生产成本.     

智能化仪表传感器非线性校正的实现

本文描述了传感器非线性特性预处理的方法．实践证明该方法适用于标准或非标准特殊传感器，处理结果使智能型仪表的测试精度有显著提高．     

Data relaying with constraints in hierarchical sensor networks

In this paper we present and discuss several optimisation problems that arise in the management of data flow in wireless sensor networks (WSNets). We consider a hierarchical architecture for WSNets composed of sensors, relays, and relay gateways. Sensors send data they generate at a known average bit rate to relays in one hop. The relay nodes use a multi-hop mechanism to reach a set of assigned gateways which then forward the data directly to the base station. We are concerned with finding an assignment of relay gateways to relays so that certain constraints are satisfied. We define a unified model in which constraints such as lifetime, data delay, and data flow splitting are formulated in terms of four optimisation problem in graphs.     

DS18B20在油气井场温度监控系统中的应用

油气井场温度监控系统属于井场重要的安全保护装置,此系统用单片机+串行智能传感器来组成,广泛使用了串行芯片。介绍了系统硬件流程图,以及温度传感器芯片DS18B20的工作流程,详细说明了获取温度传感器序列号的ROM操作命令、存储器操作命令。     

高强混凝土高温性能研究进展

对近年来高强混凝土高温性能的研究成果进行了综述与分析,包括热工性、高温下和高温后力学性能以及高强高性能混凝土的爆裂性能。其中,高强混凝土热工性能方面的研究成果较少且研究结果离散性较大;高强混凝土力学性能方面的研究主要集中于抗压强度、抗拉强度、变形性能、弹性模量、泊松比、应力 应变关系等,而对高强混凝土结构、构件高温力学性能和温度场分析方面的研究较少;高强高性能混凝土爆裂方面的研究多集中于爆裂规律和爆裂抑制措施,对爆裂机理和微观结构的研究较少。本文分别从3个方面指出了高强混凝土高温性能研究中存在的问题和今后的研究方向,为深入研究高强混凝土的高温性能提供参考。     

分布式室内移动机器人的定位与导航

针对当前移动机器人定位与导航成本较高的问题,提出了一种低成本、高性能的分布式导航方案。以性价比较 高的RPLIDAR激光传感器为核心,采用分布式软件的设计思想,设计了传感器的软件接口;采用DWA方法进行局部路 径规划。设计实现了移动机器人的定位与导航。实验结果表明该方案具有可行性与高效性。     

基于环境传感器和穿戴式传感器的行为异常检测

针对独居老人频繁出现行为异常的情况,提出了基于热释电红外传感器和穿戴式传感器的老人行为异常检测系 统。设计了行为异常检测的硬件环境,介绍了红外传感器和穿戴式传感器的工作原理,提出了依据重力加速度所在轴向 检测老人躺下位置是否发生异常的方法,并融合了红外传感器和穿戴式传感器的信息对躺下位置异常进行检测。在1 居室的家庭环境中对位置异常检测的方法进行验证,通过实验的方法验证了算法的可行性,并确定了检测躺下状态的阈 值。系统能有效实现对独居老人是否发生躺下位置异常进行检测。     

基于视觉传感的焊缝跟踪系统研究现状

视觉传感技术在焊接机器人上的应用,大大提高了机器人的焊接效率和焊接质量。文中介绍了基于视觉传感的 焊缝跟踪系统的分类及主动视觉和被动视觉技术的基本原理;分析了图像处理技术的滤波去噪、图像分割与边缘检测和 特征分析等研究方法;分析了焊缝跟踪系统的控制结构和智能控制技术的应用现状。最后提出根据视觉传感系统测得 焊缝的信息,实时调节焊接参数以及焊枪角度等工艺参数进行自动化和智能化焊接是未来发展方向。     

Assessing the effects of land use and land cover patterns on thermal conditions using landscape metrics in city of Indianapolis,United States

Direct applications of remote sensing thermal infrared (TIR) data in landscape ecological research are rare due to limitations in the sensors, calibration, and difficulty in interpretation. Currently there is a general lack of methodology for examining the relationship between land surface temperatures (LST) derived from TIR data and landscape patterns extracted from optical sensors. A separation of landscapes into values directly related to their scale and signature is a key step. In this study, a Landsat ETM+ image of Indianapolis, Unites States, acquired on June 22, 2000, was spectrally unmixed (using spectral mixture analysis, SMA) into fraction endmembers of green vegetation, soil, high albedo, and low albedo. Impervious surface was then computed from the high and low albedo images. A hybrid classification procedure was developed to classify the fraction images into seven land use and land cover (LULC) classes. Using the fractional images, the landscape composition and pattern were examined. Next, pixel-based LST measurements were correlated with the landscape fractional components to investigate LULC based relationships between LST and impervious surface and green vegetation fractions. An examination of the relationship between the LULC and LST maps with landscape metrics was finally conducted to deepen understanding of their interactions. Results indicate that SMA-derived fraction images were effective for quantifying the urban morphology and for providing reliable measurements of biophysical variables. LST was found to be positively correlated with impervious surface fraction but negatively correlated with green vegetation fraction. Each temperature zone was associated with a dominant LULC category. Further research should be directed to the theoretical and applied implications of describing such relationships between LULC patterns and urban thermal conditions.

Two preprocessing algorithms for climate time series

We propose two preprocessing algorithms suitable for climate time series. The first algorithm detects outliers based on an autoregressive cost update mechanism. The second one is based on the wavelet transform, a method from pattern recognition. In order to benchmark the algorithms'' performance we compare them to existing methods based on a synthetic data set. Eventually, for exemplary purposes, the proposed methods are applied to a data set of high-frequent temperature measurements from Novi Sad, Serbia. The results show that both methods together form a powerful tool for signal preprocessing: In case of solitary outliers the autoregressive cost update mechanism prevails, whereas the wavelet-based mechanism is the method of choice in the presence of multiple consecutive outliers.