孔径自动检测机构的设计与分析

模拟人工测量过程,设计了一种适用于气体测微传感器自动测量孔径的柔顺机构.该机构也适用于孔径分选以及小型轴类零件的自动装配等作业过程.     

Marginal and association regression models for longitudinal binary data with drop‐outs: A likelihood‐based approach

Longitudinal data often contain missing observations, and it is in general difficult to justify particular missing data mechanisms, whether random or not, that may be hard to distinguish. The authors describe a likelihood‐based approach to estimating both the mean response and association parameters for longitudinal binary data with drop‐outs. They specify marginal and dependence structures as regression models which link the responses to the covariates. They illustrate their approach using a data set from the Waterloo Smoking Prevention Project They also report the results of simulation studies carried out to assess the performance of their technique under various circumstances.     

Wide Diameters of Cartesian Product Graphs and Digraphs

In graph theory and study of fault tolerance and transmission delay of networks, connectivity and diameter of a graph are two very important parameters and have been deeply studied by many authors. Wide diameter combining connectivity with diameter is a more important parameter to measure fault tolerance and efficiency of parallel processing computer networks and has received much attention in the recent years. Diameter with width k of a graph G is defined as the minimum integer d for which between any two distinct vertices in G there exist at least k internally disjoint paths of length at most d. In the present paper, the tight upper bounds of wide diameter of the Cartesian product graphs are obtained. Some known results can be deduced or improved from ours.     

投影CRT用磁聚焦电子枪

论述了一种成功运用于１２２ｃｍ背投式彩色投影电视机阴极射线管（ＣＲＴ）中的磁聚焦电子枪。该枪采用了预聚焦发射系统和磁聚焦主透镜构成的双聚焦系统。经测试发现，当阴极电流为０．５～１．０ｍＡ时，其上屏束斑直径仅为０．０６５～０．０８０ｍｍ。     

高速SOI-LIGBT的数值分析

研制出Ｈｅ离子注入局域寿命控制ＳＯＩ横向绝缘栅双极晶体管（ＳＯＩ－ＬＩＧＢＴ），有效地提高了器件的关断速度，且与集成电路工艺相兼容。数值模拟表明，该器件的t_f～V_F折衷关系优于采用非局域寿命控制的器件，在相同关断速度下其正向压降可降低０．６～１．４ Ｖ，避免了阳极短路结构的正向快速返回现象。     

夹具浮动介质的选择原则

根据外现形态对浮动介质进行分类,对各自的性能特点进行了分析比较,较系统地总结了浮动介质的选择原则.     

两个不同品牌洗衣粉抑菌效果的测定与研究

为了比较汰渍、碧浪两种不同品牌洗衣粉的抑菌效果,本试验采用滤纸片琼脂平板扩散法,将待洲样品溶液转移至接种有大肠杆菌(Escherichia coli)、枯草芽孢杆菌(Bacillus Subtilis)和金黄色葡萄球菌(Staphylococcus aureus)敏感菌株的培养基上,经培养后测定其抑菌圈的大小,以判断其抑菌能力的强弱.通过对抑菌圈直径的比较和两个均数的差异显著性分析,发现汰溃、碧浪两种洗衣粉的押菌效果差异不显著.     

水平微管内水的流动沸腾压降特性实验研究

以水为工质,对内径为0.399 mm水平布置的不锈钢微管内的流动沸腾压降进行了实验研究.实验条件:进口温度分别为30℃、60℃、75℃,流量范围79.62~238.85 kg/(m2.s),有效加热热流密度27.8~91 kW/m2.实验结果表明,在实验范围内两相摩擦压降修正因子与流量变化的关系不大,而与进口温度的大小存在较为密切的关系.因此,结合无量纲进口温度参数建立了新的微管内水流动沸腾的压降关联式,其预测实验结果的误差在12.2%以内.     

浅谈汉译英时主语的选择

本文主要分析了学生在做汉译英时主语常常丢失的情况。这是因为其一:汉语是话题优先型语言,话题与主语重合或话题出现而主语不出现的现象十分普遍;而英语是主语优先型语言,话题仅是一种特殊现象;其二:在做翻译练习时,主语选择的错误受到二语习得母语迁移的影响     

BX型中变催化剂还原性能的研究

铁铬系中温变换催化剂在使用前需经还原活化才具有催化活性。而还原条件的选取，又对催化剂还原后的性能有直接的影响。本文用透射电子显微技术研究了ＢＸ型催化剂还原前后的差异，分析了造成这一差异的原因，并计算了还原后催化剂颗粒的平均直径。用程序升温还原技术研究了催化剂的还原过程，用红外光谱技术研究了不同温度下催化剂的还原速率。综合研究结果讨论了还原过程中催化剂对还原条件的具体要求。并结合上述结果讨论了工业生产中现采用的还原程序，认为现采用的还原程序比较理想。