首页 | 本学科首页   官方微博 | 高级检索  
     

波长及金属膜厚度对表面等离子体共振的影响
引用本文:梁枫,李方亮,刘人华. 波长及金属膜厚度对表面等离子体共振的影响[J]. 湛江师范学院学报, 2011, 32(6): 68-73
作者姓名:梁枫  李方亮  刘人华
作者单位:1. 湛江师范学院物理科学与技术学院,广东湛江,524048
2. 昂纳信息技术(深圳)有限公司QA,广东深圳,518033
摘    要:表面等离子体共振(SPR)传感器的光源波长和金膜的厚度影响表面等离子体共振吸收,波长及金膜厚度不同,共振峰的半宽度及深度就会不同,即仪器的灵敏度和实验现象不同.该文利用MATLAB模拟仿真,计算得出表面等离子体共振传感器不同波段光源对应的最佳金属膜厚度,将中心波长为1 550nm、1 310nm、850nm、660nm 4种光源进行对比,得出光源波长为1 550nm、金膜厚度为40nm时,表面等离子体共振传感器的灵敏度最高,实验现象最明显.

关 键 词:表面等离子体共振(SPR)  厚度  共振吸收

Effect of the Wavelength and the Thickness of Metal film on the Surface Plasmon Resonance Absorption
LIANG Feng,LI Fangliang,LIU Renhua. Effect of the Wavelength and the Thickness of Metal film on the Surface Plasmon Resonance Absorption[J]. Journal of Zhanjiang Normal College, 2011, 32(6): 68-73
Authors:LIANG Feng  LI Fangliang  LIU Renhua
Affiliation:1(1.Physical Experiment Center,Zhanjiang Normal College,Zhanjiang524048,Guangdong China; 2.O-Net Communications(Shenzhen) Limited QA,Shenzhen518033,Guangdong,China)
Abstract:For the SPR(surface plasmon resonance) sensor,both the wavelength of the light source and the thickness of the gold film effect the surface plasma resonance absorption.When the thickness is different,the full width at half maximum and the deepness of the resonance peak are also different,which means that the sensitivity and experimental phenomena are different.In this paper,we calculated the thickness of metal film corresponding to the light of different wave band using MATLAB.At the same time,four lights centered at 1550 nm,1310nm,850nm and 660nm are compared.The results showed that the sensitivity of SPR sensor is the highest with the most obvious experimental phenomena when the light centers at 1550 nm and the thickness is 40nm.
Keywords:surface plasmon resonance(SPR)  thickness  resonance absorption
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号