| 烟熏炉加热仓流动性能研究 |
| |
| 引用本文： | 施 明,刘 红,李伟国,陈斐奇.烟熏炉加热仓流动性能研究[J].华南农业大学学报(社会科学版),2016,34(4). |
| |
| 作者姓名： | 施 明 刘 红 李伟国 陈斐奇 |
| |
| 作者单位： | 1．浙江瑞邦智能装备股份有限公司，浙江嘉兴314006;2．浙江工业大学机械工程学院，浙江杭州 310014 |
| |
| 摘 要： | 针对某款烟熏炉在使用过程中出现的烟熏效果不佳、加热仓内上下2部分食物蒸煮不均匀的问题，采用CFD技
术，依据烟熏炉结构特点与加工要求，研究加热仓的气流场仿真分析的建模方法。提出采用二维简化建模分析方法，提
高计算效率。根据加热仓气流场的仿真结果，论文提出了在加热仓进风口增加导流板结构的方案。仿真与实验结果表
明：导流板有效地改善了加热仓内的流场分布，有助于克服加热仓内流场分布不均匀导致的食品加工效率低的问题。该
研究具有良好的实用价值。
|
| 关 键 词： | 烟熏炉 计算流体动力学( CFD) 导流板 二维简化建模 流场分布 |
Fluidity Performance Study for Heating House of Fumigation Oven |
| |
| SHI Mingl,LIU Hong,LI Weigu,HENG Feiqj.Fluidity Performance Study for Heating House of Fumigation Oven[J].Journal of South China Agricultural University:Social Science Edition,2016,34(4). |
| |
| Authors: | SHI Mingl LIU Hong LI Weigu HENG Feiqj |
| |
| Institution: | 1. Zhejiang Ribon Intelligent Equipment Co. , Ltd. , Jiaxing,Ziejiang 314006 ,China;
2. College of Mechanical Engineering , Zhejiang University of Technology , Hangzhou 310024 , China |
| |
| Abstract: | According to the shortcoming of that the smoking effect is not good and the food of upper part and lower part in
heating bin can''t be smoked simultaneously in the use process of some a fumigation oven, this paper studied modeling
method of air flow field for simulation analysis based on to the structural characteristics and processing requirements of
the fumigation oven, using CFD techniques. The paper put forward a method of 2D simplifying modeling and analysis to
improve the simulation efficiency. According to the simulation results of the air flow field, this paper gave out a kind of
deflector structure. The simulation and experimental results showed that the deflector had a good practical value to solve
the problem of the lower efficiency caused by uneven distribution of flow field. |
| |
| Keywords: | fumigation oven CFD ( Computational Fluid Dynamics) deflector 2D simplifying modeling distribution of
flow field |
|
| 点击此处可从《华南农业大学学报(社会科学版)》浏览原始摘要信息 |
| 点击此处可从《华南农业大学学报(社会科学版)》下载免费的PDF全文 |
