首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于夹点技术的Einstein循环制冷系统优化
引用本文:林发龙,刘道平,杨 亮,谢育博,辛 岩,郝淑萍.基于夹点技术的Einstein循环制冷系统优化[J].华南农业大学学报(社会科学版),2017,35(2):85-90.
作者姓名:林发龙  刘道平  杨 亮  谢育博  辛 岩  郝淑萍
作者单位:上海理工大学制冷与低温工程研究所,上海200093
基金项目:上海市教育委员会科研创新项目资助(1322117)。
摘    要:针对制冷系统性能较低的缺点,基于系统现行换热网络,分析Einstein循环制冷系统的工作原理,利用夹点技术 对其进行分析改造。应用问题表格法确定出夹点的位置,计算各换热器的热负荷。研究结果表明:系统优化后,输入系 统的热公用工程量和冷公用工程量分别降低了12.5%和48. 1%,系统能效系数CCOP提高了14. 3%。夹点技术优化提升 Einstein循环制冷系统性能效果显著,取得较好的节能效果。

关 键 词:制冷系统  夹点技术  换热网络  热负荷

Optimization of Einstein Cycle Refrigeration System Based on Pinch Technology
LIN Falong,LIU Daoping,YANG liang,XIE Yubo,XIN Yan,HAO Shuping.Optimization of Einstein Cycle Refrigeration System Based on Pinch Technology[J].Journal of South China Agricultural University:Social Science Edition,2017,35(2):85-90.
Authors:LIN Falong  LIU Daoping  YANG liang  XIE Yubo  XIN Yan  HAO Shuping
Institution:Institute of Refrigeration and Cryogenics,University of Shanghai for Science and Technology , Shanghai 200093 .China
Abstract:According to the low performance of the refrigeration system, the principle of Einstein cycle refrigeration system was explained, and the energy saving by analyzing and retrofitting the present heat exchanger network of the system was analyzed by using the pinch technology. Problem table method was used to determine the pinch point position, and the heat load of each heat exchanger was calculated. The results show that, the heat and cold input of the system is reduced by 12. 5% and 48. 1% respectively , also the CCOP increased by 14. 3% after optimized. It is obviously effective to improve the performance of Einstein cycle refrigeration system.
Keywords:refrigerating  system  pinch  technology  heat  exchanger  network  heat  load
点击此处可从《华南农业大学学报(社会科学版)》浏览原始摘要信息
点击此处可从《华南农业大学学报(社会科学版)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号