| 管内旗形件后掠角对油类介质对流换热的影响 |
| |
| 引用本文： | 向东,陈礼,陈清华.管内旗形件后掠角对油类介质对流换热的影响[J].重庆大学学报(社会科学版),1995,1(2). |
| |
| 作者姓名： | 向东 陈礼 陈清华 |
| |
| 作者单位： | 重庆大学热力工程系，重庆大学热力工程系，重庆大学热力工程系 重庆，630044，重庆，630044，重庆，630044 |
| |
| 摘 要： | 实验研究了水平圆管内插入旗形件时其后掠角对30~#透平油的对流传热及流阻特性的影响。实验圆管为Φ24 mm×2 mm×700 mm的紫铜圆管,后掠角为86°,81°,76°,70°,65°五种。其它参数范围为:146≤Pr≤206,1067≤Re≤6857,0.07
|
| 关 键 词： | 强迫对流 强化传热 实验 旗形插入件后掠角 |
The Influence of Sweep Angle on the Forced Convection of oil in a Tube with Flag-type Insert |
| |
| Xiang DongChen LiChen Qing Hua.The Influence of Sweep Angle on the Forced Convection of oil in a Tube with Flag-type Insert[J].Journal of Chongqing University(Social Sciences Edition),1995,1(2). |
| |
| Authors: | Xiang DongChen LiChen Qing Hua |
| |
| Institution: | Xiang Dong
Chen Li
Chen Qing Hua |
| |
| Abstract: | Experimental study of forced convection heat transfer in a horizontal circular tube with flag-type insert is performed to investigate the characteristics of fluid flow and heat transfer as well as the influence of the sweep angle of flag-type insert. The working fluid is 30# turbine oil. In experiment, when sweep angle increases the heat transfer coefficient increases at the beginning and shows the highest value at =76,then drops down. However,flow resistance force increases all the time. |
| |
| Keywords: | forced convection heat transfer enhancement sweep angle of flag-type |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《重庆大学学报(社会科学版)》浏览原始摘要信息 |
| 点击此处可从《重庆大学学报(社会科学版)》下载免费的PDF全文 |
