首页 | 本学科首页   官方微博 | 高级检索  
     检索      

原子吸收法测定硫酸中的铁、铜含量
引用本文:钱初洪,詹凤仙.原子吸收法测定硫酸中的铁、铜含量[J].肇庆学院学报,2008,29(5):34-36.
作者姓名:钱初洪  詹凤仙
作者单位:肇庆学院,化学化工学院,广东,肇庆,526061
摘    要:介绍了用原子吸收法测定硫酸中铁、铜含量的方法,考察了6种表面活性剂的增敏效果后。选择质量分数为0.2%的吐温-80作增敏剂。测定结果的相对标准偏差为0.41%-5.52%;铁的检测限达到0.0086μg/mL,灵敏度为3.19μg/mL;铜的检测限为0.0194μg/mL。灵敏度为5.36μg/mL;Fe与Cu的加标回收率在97.3%-100.3%g围内。

关 键 词:原子吸收法  表面活性剂  硫酸    

Determination of the Content of the Iron and Copper in the Sulfuric Acid by Flame Atomic Absorption Spectrometry
QIAN Chuhong,ZHAN Fengxian.Determination of the Content of the Iron and Copper in the Sulfuric Acid by Flame Atomic Absorption Spectrometry[J].Journal of Zhaoqing University (Bimonthly),2008,29(5):34-36.
Authors:QIAN Chuhong  ZHAN Fengxian
Institution:(Faculty of Chemistry and Chemical Engineering, Zhaoqing University,Zhaoqing Guangdong 526061, China)
Abstract:The determination of the content of iron and copper in the sulfuric acid by FAAS is described in this paper. Six different kinds of surfactants' effect were investigated,0.2% (mass fraction)Tween-80 is chosen as synergist. The results show that:RSD of the determining is 0.41%-5.52% ;Fe:the detection limit 0.0086μg/mL,the sensitivity 3.19μg/mL;Cu:the detection limit 0.0194μg/mL,the sensitivity 5.36μg/mL; the recovery between 97.3%-100.3%.
Keywords:flame atomic absorption spctrophotometry  surfactant sulfuric  acid  iron  copper
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号