| 系杆拱桥钢锚箱焊接工艺研究 |
| |
| 引用本文： | 郭文霞.系杆拱桥钢锚箱焊接工艺研究[J].内蒙古工业大学学报,2014(1):47-50. |
| |
| 作者姓名： | 郭文霞 |
| |
| 作者单位： | 内蒙古工业大学工程训练中心,呼和浩特010051 |
| |
| 基金项目： | 内蒙古自治区高等学校科学研究项目（NJW11321）,内蒙古工业大学科学研究基金项目（X201241）. |
| |
| 摘 要： | 京包线集宁至包头段某系杆拱桥,在设计制造过程中,吊杆上下端通过钢制锚箱分别与拱肋下弦管及系杆连接,本文通过对钢锚箱的焊接工艺参数进行了合理的制定,并对焊接后的性能进行评定,得到一套合理实用的系杆拱桥钢锚箱焊接的工艺。
|
| 关 键 词： | 钢锚箱 焊接 工艺 |
The Welding Process of Tied -arch Bridge with Steel Anchor Box |
| |
| GUO Wenxia.The Welding Process of Tied -arch Bridge with Steel Anchor Box[J].Journal of Inner Mongolia Polytechnic University(Social Sciences Edition),2014(1):47-50. |
| |
| Authors: | GUO Wenxia |
| |
| Institution: | GUO Wenxia (Engineering Training Center, Inner Mongolia University of Technology, Hohhot 010051) |
| |
| Abstract: | In the process of designing and manufacturing ,the top and bottom of the suspender which was located in the tied -arch bridge of Jing Bao line between Jining and Baotou ,were connected with the lower chord member of the arch rib and the tie ,respectively ,through the steel anchor box .In this work ,based on the accurate establishment of the welding procedure parameters and the performance evaluation after welding ,a reasonable and practical welding procedure of the tied -arch bridge with steel anchor box was obtained . |
| |
| Keywords: | Steel anchor box Welding Procedure |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
