| 球头铣刀和工件之间加工倾角的试验研究 |
| |
| 引用本文： | 陈英,王义强,程操宇.球头铣刀和工件之间加工倾角的试验研究[J].吉林工程技术师范学院学报,2010,26(4):78-80. |
| |
| 作者姓名： | 陈英 王义强 程操宇 |
| |
| 作者单位： | 1. 吉林大学机械科学与工程学院,吉林,长春,130025;吉林工程技术师范学院机械工程学院,吉林,长春,130052
2. 吉林大学机械科学与工程学院,吉林,长春,130025 |
| |
| 摘 要： | 通过实验研究了球头立铣刀与加工表面倾角之间的关系,得出用高速钢球头立铣刀加工硬铝合金时的较优倾角,并指出倾角编程策略。
|
| 关 键 词： | 球头铣刀 倾角 表面粗糙度 |
Experimental Study on Machining Obliquity Between Ball-end Cutter and Workpiece |
| |
| CHEN Ying,WANG Yi-qiang,CHENG Cao-yu.Experimental Study on Machining Obliquity Between Ball-end Cutter and Workpiece[J].Journal of Jilin Teachers Institute of Engineering and Technology(Natural Sciences Edition),2010,26(4):78-80. |
| |
| Authors: | CHEN Ying WANG Yi-qiang CHENG Cao-yu |
| |
| Institution: | 1.College of Mechanical Science and Engineering;Jilin University;Changchun Jilin 130025;China;2.College of Mechanical Engineering;Jilin Teachers Institute of Engineeringand Technology;Changchun Jilin 130052;China |
| |
| Abstract: | The relation of ball-end cutter and the obliquity of machined surface is studied by experiment.The preferably obliquity of hard alloy cut by high-speed steel is educed and the programming strategy of obliquity is concluded. |
| |
| Keywords: | ball-end cutter obliquity surface roughness |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
