| 印刷烫金机走纸控制器的软硬件设计 |
| |
| 引用本文： | 林益平.印刷烫金机走纸控制器的软硬件设计[J].肇庆学院学报,2014(2):49-51,59. |
| |
| 作者姓名： | 林益平 |
| |
| 作者单位： | 肇庆学院电子信息与机电工程学院,广东肇庆526061 |
| |
| 摘 要： | 介绍了印刷烫金机走纸控制器软硬件的设计方案,该控制器选用低栅压导通的功率场效应管作为步进电机驱动,控制CPU采用AVR单片机.控制器具有走纸长度设置、电机启停低速而运行高速、走纸完毕声光提示、设置参数掉电保护等功能.
|
| 关 键 词： | 印刷烫金机 步进电机 控制器设计 |
Design on Paper Feed Controller of Hot Stamping Printing Machine |
| |
| LIN Yiping.Design on Paper Feed Controller of Hot Stamping Printing Machine[J].Journal of Zhaoqing University (Bimonthly),2014(2):49-51,59. |
| |
| Authors: | LIN Yiping |
| |
| Institution: | LIN Yiping (College o f Electronic Information and Mechatronic Engineering, Zhaoqing University, Zhaoqing, Guangdong 526061, China) |
| |
| Abstract: | The present article intends to describe the design of paper feed controller of hot stamping printing machine, in which low gate voltage FET is chosen to be the driving power for the stepper motor. The controller is controlled by AVR MCU, which provides the functions of paper feed length setting, start/stop function, sound and light warning, parameters configuring and brownout protection. |
| |
| Keywords: | hot stamping printing machine stepper motor design of controller |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
