A note on Markov chain Monte Carlo sweep strategies

Markov chain Monte Carlo (MCMC) routines have become a fundamental means for generating random variates from distributions otherwise difficult to sample. The Hastings sampler, which includes the Gibbs and Metropolis samplers as special cases, is the most popular MCMC method. A number of implementations are available for running these MCMC routines varying in the order through which the components or blocks of the random vector of interest X are cycled or visited. The two most common implementations are the deterministic sweep strategy, whereby the components or blocks of X are updated successively and in a fixed order, and the random sweep strategy, whereby the coordinates or blocks of X are updated in a randomly determined order. In this article, we present a general representation for MCMC updating schemes showing that the deterministic scan is a special case of the random scan. We also discuss decision criteria for choosing a sweep strategy.     

Convergence assessment techniques for Markov chain Monte Carlo

MCMC methods have effectively revolutionised the field of Bayesian statistics over the past few years. Such methods provide invaluable tools to overcome problems with analytic intractability inherent in adopting the Bayesian approach to statistical modelling.However, any inference based upon MCMC output relies critically upon the assumption that the Markov chain being simulated has achieved a steady state or converged. Many techniques have been developed for trying to determine whether or not a particular Markov chain has converged, and this paper aims to review these methods with an emphasis on the mathematics underpinning these techniques, in an attempt to summarise the current state-of-play for convergence assessment techniques and to motivate directions for future research in this area.     

A simulation approach to convergence rates for Markov chain Monte Carlo algorithms

Markov chain Monte Carlo (MCMC) methods, including the Gibbs sampler and the Metropolis–Hastings algorithm, are very commonly used in Bayesian statistics for sampling from complicated, high-dimensional posterior distributions. A continuing source of uncertainty is how long such a sampler must be run in order to converge approximately to its target stationary distribution. A method has previously been developed to compute rigorous theoretical upper bounds on the number of iterations required to achieve a specified degree of convergence in total variation distance by verifying drift and minorization conditions. We propose the use of auxiliary simulations to estimate the numerical values needed in this theorem. Our simulation method makes it possible to compute quantitative convergence bounds for models for which the requisite analytical computations would be prohibitively difficult or impossible. On the other hand, although our method appears to perform well in our example problems, it cannot provide the guarantees offered by analytical proof.     

Over-relaxation methods and coupled Markov chains for Monte Carlo simulation

This paper is concerned with improving the performance of certain Markov chain algorithms for Monte Carlo simulation. We propose a new algorithm for simulating from multivariate Gaussian densities. This algorithm combines ideas from coupled Markov chain methods and from an existing algorithm based only on over-relaxation. The rate of convergence of the proposed and existing algorithms can be measured in terms of the square of the spectral radius of certain matrices. We present examples in which the proposed algorithm converges faster than the existing algorithm and the Gibbs sampler. We also derive an expression for the asymptotic variance of any linear combination of the variables simulated by the proposed algorithm. We outline how the proposed algorithm can be extended to non-Gaussian densities.     

Accelerating Monte Carlo Markov chain convergence for cumulative-link generalized linear models

The ordinal probit, univariate or multivariate, is a generalized linear model (GLM) structure that arises frequently in such disparate areas of statistical applications as medicine and econometrics. Despite the straightforwardness of its implementation using the Gibbs sampler, the ordinal probit may present challenges in obtaining satisfactory convergence.We present a multivariate Hastings-within-Gibbs update step for generating latent data and bin boundary parameters jointly, instead of individually from their respective full conditionals. When the latent data are parameters of interest, this algorithm substantially improves Gibbs sampler convergence for large datasets. We also discuss Monte Carlo Markov chain (MCMC) implementation of cumulative logit (proportional odds) and cumulative complementary log-log (proportional hazards) models with latent data.     

Analyses of infectious disease data from household outbreaks by Markov chain Monte Carlo methods

The analysis of infectious disease data presents challenges arising from the dependence in the data and the fact that only part of the transmission process is observable. These difficulties are usually overcome by making simplifying assumptions. The paper explores the use of Markov chain Monte Carlo (MCMC) methods for the analysis of infectious disease data, with the hope that they will permit analyses to be made under more realistic assumptions. Two important kinds of data sets are considered, containing temporal and non-temporal information, from outbreaks of measles and influenza. Stochastic epidemic models are used to describe the processes that generate the data. MCMC methods are then employed to perform inference in a Bayesian context for the model parameters. The MCMC methods used include standard algorithms, such as the Metropolis–Hastings algorithm and the Gibbs sampler, as well as a new method that involves likelihood approximation. It is found that standard algorithms perform well in some situations but can exhibit serious convergence difficulties in others. The inferences that we obtain are in broad agreement with estimates obtained by other methods where they are available. However, we can also provide inferences for parameters which have not been reported in previous analyses.     

An automated (Markov chain) Monte Carlo EM algorithm

We present an automated Monte Carlo EM (MCEM) algorithm which efficiently assesses Monte Carlo error in the presence of dependent Monte Carlo, particularly Markov chain Monte Carlo, E-step samples and chooses an appropriate Monte Carlo sample size to minimize this Monte Carlo error with respect to progressive EM step estimates. Monte Carlo error is gauged though an application of the central limit theorem during renewal periods of the MCMC sampler used in the E-step. The resulting normal approximation allows us to construct a rigorous and adaptive rule for updating the Monte Carlo sample size each iteration of the MCEM algorithm. We illustrate our automated routine and compare the performance with competing MCEM algorithms in an analysis of a data set fit by a generalized linear mixed model.     

Proximal Markov chain Monte Carlo algorithms

This paper presents a new Metropolis-adjusted Langevin algorithm (MALA) that uses convex analysis to simulate efficiently from high-dimensional densities that are log-concave, a class of probability distributions that is widely used in modern high-dimensional statistics and data analysis. The method is based on a new first-order approximation for Langevin diffusions that exploits log-concavity to construct Markov chains with favourable convergence properties. This approximation is closely related to Moreau–Yoshida regularisations for convex functions and uses proximity mappings instead of gradient mappings to approximate the continuous-time process. The proposed method complements existing MALA methods in two ways. First, the method is shown to have very robust stability properties and to converge geometrically for many target densities for which other MALA are not geometric, or only if the step size is sufficiently small. Second, the method can be applied to high-dimensional target densities that are not continuously differentiable, a class of distributions that is increasingly used in image processing and machine learning and that is beyond the scope of existing MALA and HMC algorithms. To use this method it is necessary to compute or to approximate efficiently the proximity mappings of the logarithm of the target density. For several popular models, including many Bayesian models used in modern signal and image processing and machine learning, this can be achieved with convex optimisation algorithms and with approximations based on proximal splitting techniques, which can be implemented in parallel. The proposed method is demonstrated on two challenging high-dimensional and non-differentiable models related to image resolution enhancement and low-rank matrix estimation that are not well addressed by existing MCMC methodology.     

Markov chain Monte Carlo methods for parameter estimation of the modified Weibull distribution

In this paper, the Markov chain Monte Carlo (MCMC) method is used to estimate the parameters of a modified Weibull distribution based on a complete sample. While maximum-likelihood estimation (MLE) is the most used method for parameter estimation, MCMC has recently emerged as a good alternative. When applied to parameter estimation, MCMC methods have been shown to be easy to implement computationally, the estimates always exist and are statistically consistent, and their probability intervals are convenient to construct. Details of applying MCMC to parameter estimation for the modified Weibull model are elaborated and a numerical example is presented to illustrate the methods of inference discussed in this paper. To compare MCMC with MLE, a simulation study is provided, and the differences between the estimates obtained by the two algorithms are examined.     

Monte Carlo integration with Markov chain

There are two conceptually distinct tasks in Markov chain Monte Carlo (MCMC): a sampler is designed for simulating a Markov chain and then an estimator is constructed on the Markov chain for computing integrals and expectations. In this article, we aim to address the second task by extending the likelihood approach of Kong et al. for Monte Carlo integration. We consider a general Markov chain scheme and use partial likelihood for estimation. Basically, the Markov chain scheme is treated as a random design and a stratified estimator is defined for the baseline measure. Further, we propose useful techniques including subsampling, regulation, and amplification for achieving overall computational efficiency. Finally, we introduce approximate variance estimators for the point estimators. The method can yield substantially improved accuracy compared with Chib's estimator and the crude Monte Carlo estimator, as illustrated with three examples.     

Parallel Markov chain Monte Carlo for Bayesian hierarchical models with big data,in two stages

Due to the escalating growth of big data sets in recent years, new Bayesian Markov chain Monte Carlo (MCMC) parallel computing methods have been developed. These methods partition large data sets by observations into subsets. However, for Bayesian nested hierarchical models, typically only a few parameters are common for the full data set, with most parameters being group specific. Thus, parallel Bayesian MCMC methods that take into account the structure of the model and split the full data set by groups rather than by observations are a more natural approach for analysis. Here, we adapt and extend a recently introduced two-stage Bayesian hierarchical modeling approach, and we partition complete data sets by groups. In stage 1, the group-specific parameters are estimated independently in parallel. The stage 1 posteriors are used as proposal distributions in stage 2, where the target distribution is the full model. Using three-level and four-level models, we show in both simulation and real data studies that results of our method agree closely with the full data analysis, with greatly increased MCMC efficiency and greatly reduced computation times. The advantages of our method versus existing parallel MCMC computing methods are also described.     

Parallel algorithms for Markov chain Monte Carlo methods in latent spatial Gaussian models

Markov chain Monte Carlo (MCMC) implementations of Bayesian inference for latent spatial Gaussian models are very computationally intensive, and restrictions on storage and computation time are limiting their application to large problems. Here we propose various parallel MCMC algorithms for such models. The algorithms' performance is discussed with respect to a simulation study, which demonstrates the increase in speed with which the algorithms explore the posterior distribution as a function of the number of processors. We also discuss how feasible problem size is increased by use of these algorithms.     

Markov chain Monte Carlo algorithms with sequential proposals

We explore a general framework in Markov chain Monte Carlo (MCMC) sampling where sequential proposals are tried as a candidate for the next state of the Markov chain. This sequential-proposal framework can be applied to various existing MCMC methods, including Metropolis–Hastings algorithms using random proposals and methods that use deterministic proposals such as Hamiltonian Monte Carlo (HMC) or the bouncy particle sampler. Sequential-proposal MCMC methods construct the same Markov chains as those constructed by the delayed rejection method under certain circumstances. In the context of HMC, the sequential-proposal approach has been proposed as extra chance generalized hybrid Monte Carlo (XCGHMC). We develop two novel methods in which the trajectories leading to proposals in HMC are automatically tuned to avoid doubling back, as in the No-U-Turn sampler (NUTS). The numerical efficiency of these new methods compare favorably to the NUTS. We additionally show that the sequential-proposal bouncy particle sampler enables the constructed Markov chain to pass through regions of low target density and thus facilitates better mixing of the chain when the target density is multimodal.

     

Markov chain Monte Carlo methods for family trees using a parallel processor

A 1024 CPU parallel computer is used to obtain simulated genotypes in the Tristan da Cunha pedigree using random local updating methods. A four-colour theorem is invoked to justify simultaneous updating. Multiple copies of the program are run simultaneously. These results are used to infer the source of the B allele of the ABO blood group that is present in the population.     

Model selection in finite mixture of regression models: a Bayesian approach with innovative weighted g priors and reversible jump Markov chain Monte Carlo implementation

Finite mixture of regression (FMR) models are aimed at characterizing subpopulation heterogeneity stemming from different sets of covariates that impact different groups in a population. We address the contemporary problem of simultaneously conducting covariate selection and determining the number of mixture components from a Bayesian perspective that can incorporate prior information. We propose a Gibbs sampling algorithm with reversible jump Markov chain Monte Carlo implementation to accomplish concurrent covariate selection and mixture component determination in FMR models. Our Bayesian approach contains innovative features compared to previously developed reversible jump algorithms. In addition, we introduce component-adaptive weighted g priors for regression coefficients, and illustrate their improved performance in covariate selection. Numerical studies show that the Gibbs sampler with reversible jump implementation performs well, and that the proposed weighted priors can be superior to non-adaptive unweighted priors.     

A hybrid Markov chain for the Bayesian analysis of the multinomial probit model

Bayesian inference for the multinomial probit model, using the Gibbs sampler with data augmentation, has been recently considered by some authors. The present paper introduces a modification of the sampling technique, by defining a hybrid Markov chain in which, after each Gibbs sampling cycle, a Metropolis step is carried out along a direction of constant likelihood. Examples with simulated data sets motivate and illustrate the new technique. A proof of the ergodicity of the hybrid Markov chain is also given.     

A flexible particle Markov chain Monte Carlo method

Particle Markov Chain Monte Carlo methods are used to carry out inference in nonlinear and non-Gaussian state space models, where the posterior density of the states is approximated using particles. Current approaches usually perform Bayesian inference using either a particle marginal Metropolis–Hastings (PMMH) algorithm or a particle Gibbs (PG) sampler. This paper shows how the two ways of generating variables mentioned above can be combined in a flexible manner to give sampling schemes that converge to a desired target distribution. The advantage of our approach is that the sampling scheme can be tailored to obtain good results for different applications. For example, when some parameters and the states are highly correlated, such parameters can be generated using PMMH, while all other parameters are generated using PG because it is easier to obtain good proposals for the parameters within the PG framework. We derive some convergence properties of our sampling scheme and also investigate its performance empirically by applying it to univariate and multivariate stochastic volatility models and comparing it to other PMCMC methods proposed in the literature.     

Bayesian image analysis with Markov chain Monte Carlo and coloured continuum triangulation models

It is now possible to carry out Bayesian image segmentation from a continuum parametric model with an unknown number of regions. However, few suitable parametric models exist. We set out to model processes which have realizations that are naturally described by coloured planar triangulations. Triangulations are already used, to represent image structure in machine vision, and in finite element analysis, for domain decomposition. However, no normalizable parametric model, with realizations that are coloured triangulations, has been specified to date. We show how this must be done, and in particular we prove that a normalizable measure on the space of triangulations in the interior of a fixed simple polygon derives from a Poisson point process of vertices. We show how such models may be analysed by using Markov chain Monte Carlo methods and we present two case-studies, including convergence analysis.