Comparison of Efficiency of Stratified and Unequal Probability Sampling

In this article, a choice of the optimum sampling design to study a finite population is studied. Three sampling schemes are compared, viz., Sunter's procedure of unequal probability sampling, stratified sampling under optimum stratification, and simple random sampling without replacement. The comparison is made against a background of various correlation between stratification and survey variables and various variability in the variables. Under weak correlation and large variability, stratification appeared to be more efficient than Sunter's procedure. Under strong correlation and/or low variability in the variables, the latter procedure was the most efficient. Simple random sampling was usually the least efficient.     

Developing of a new system of skip-lot reinspection schemes

The skip-lot sampling plans are widely used in industries for quality inspection of products in order to reduce the sampling costs and inspection efforts when products have good quality history. Also, the skip-lot sampling plan concept is sound and useful and it is economically advantageous to use the skip-lot approach in the design of sampling plans. Thus, the skip-lot sampling plans are useful to minimize the cost of the inspection particularly in costly and destructive testing. Hence, a new system of skip-lot sampling plans designated as SkSP-2-R plan is developed in this article by incorporating the idea of resampling procedure in the skip-lot sampling plans of type SkSP-2. A Markov chain formulation and derivation of performance measures for this new plan are presented. The properties and advantages of the SkSP-2-R plan are studied with single sampling plan as the reference plan. The response-to-change characteristics of the SkSP-2-R plan are also investigated, based on the average run length.     

Interval censored sampling plans for the log-logistic lifetime distribution

The log-logistic distribution is one of the popular distributions in life-testing applications. This article develops an acceptance sampling procedure for the log-logistic lifetime distribution based on grouped data when the shape parameter is given. Both producer and consumer risks are considered to develop the ordinary, approximate and simulated sampling plans. Some of the proposed sampling plans are tabulated; moreover, those three types of sampling plans are compared with each other under the same censoring rates. The use of these tables is illustrated by an example.     

Construction and selection of multiple dependent (deferred) state sampling plan

Tables have been prepared for the construction and selection of multiple dependent (deferred) state (MDS) sampling plans of type MDS-(c₁,c₂). These plans are compared with conventional sampling plans (such as single and double sampling) and it is shown that MDS-type plans require a smaller sample size. A special feature of the MDS-(0,1) plan is highlighted and its design procedure is indicated.     

Acceptance sampling plans under progressive interval censoring with likelihood ratio

The paper investigates the design of life test plans under progressively interval censored test. Based on the likelihood ratio, the proposed life test plans are established so that the required producer and consumer risks can be satisfied simultaneously. The advantage of the proposed method is that the developed sampling procedure depends on the likelihood ratio only so that the method can be applied to any lifetime distribution when only one parameter is unknown. A numerical study is conducted and some of the sampling plans for the Weibull lifetime distribution with different shape parameters are tabulated for illustration. Moreover, the influence of the removal schemes on the proposed sampling plans is discussed.     

Optimal design of variable acceptance sampling plans for mixture distribution

ABSTRACT

The paper investigates the design of single and sequential variable acceptance sampling plans for a mixture distribution. Mixture distributions are seen in many practical problems such as life testing experiments of electronic components and clinical trials. The sampling plans for this kind of situations are not well addressed in the literature. We first propose a single sampling plan for a distribution which is a mixture of two exponential distributions. An optimization problem which minimizes the total cost of testing at given producer's and consumer's risks is solved to obtain the plan parameters. Two different sequential sampling plans are also defined and plan parameters are obtained by solving corresponding optimization problems. Finally, a case study, a simulation study and a sensitivity analysis are presented to illustrate our sampling plans.     

Failure–censored reliability sampling plans for the exponential distribution

In this paper we examine the failure-censored sampling plans for the two–parameter exponential distri- bution based on m random samples, each of size n. The suggested procedure is based on exact results and only the first failure time of each sample is needed. The values of the acceptability constant are also tabulated for selected values of p _α ¹ p _β ¹, α and β. Further, a comparison of the proposed sampling plans with ordinary sampling plans using a sample of size mn is made. When compared to ordinary sampling plans, the proposed plan has an advantage in terms of shorter test-time and a saving of resources.     

Improved attribute acceptance sampling plans based on maxima nomination sampling

This paper demonstrates the use of maxima nomination sampling (MNS) technique in design and evaluation of single AQL, LTPD, and EQL acceptance sampling plans for attributes. We exploit the effect of sample size and acceptance number on the performance of our proposed MNS plans using operating characteristic (OC) curve. Among other results, we show that MNS acceptance sampling plans with smaller sample size and bigger acceptance number perform better than commonly used acceptance sampling plans for attributes based on simple random sampling (SRS) technique. Indeed, MNS acceptance sampling plans result in OC curves which, compared to their SRS counterparts, are much closer to the ideal OC curve. A computer program is designed which can be used to specify the optimum MNS acceptance sampling plan and to show, visually, how the shape of the OC curve changes when parameters of the acceptance sampling plan vary. Theoretical results and numerical evaluations are given.     

A two-stage group sampling plan based on truncated life tests for a general distribution

A two-stage group acceptance sampling plan based on a truncated life test is proposed, which can be used regardless of the underlying lifetime distribution when multi-item testers are employed. The decision upon lot acceptance can be made in the first or second stage according to the number of failures from each group. The design parameters of the proposed plan such as number of groups required and the acceptance number for each of two stages are determined independently of an underlying lifetime distribution so as to satisfy the consumer's risk at the specified unreliability. Single-stage group sampling plans are also considered as special cases of the proposed plan and compared with the proposed plan in terms of the average sample number and the operating characteristics. Some important distributions are considered to explain the procedure developed here.     

A procedure for selection of a gamma-Poisson single sampling plan by attributes

Design and evaluation of sampling plans by attributes and by variables are important aspects in the area of acceptance sampling research. Various procedures for the selection of conventional single sampling by attributes have been developed and are available in the literature. This paper presents a design methodology and tables for the selection of parameters of single sampling plans for specified requirements (strengths) under the conditions of a gamma prior and Poisson sampling distribution. The relative efficiency of gamma-Poisson single sampling plans over conventional plans is discussed through empirical illustrations.     

Max-min multiple comparison procedure for comparing several dose levels with a zero dose control

The comparison of increasing doses of a compound to a zero dose control is of interest in medical and toxicological studies. Assume that the mean dose effects are non-decreasing among the non-zero doses of the compound. A simple procedure that modifies Dunnett's procedure is proposed to construct simultaneous confidence intervals for pairwise comparisons of each dose group with the zero dose control by utilizing the ordering of the means. The simultaneous lower bounds and upper bounds by the new procedure are monotone, which is not the case with Dunnett's procedure. This is useful to categorize dose levels. The expected gains of the new procedure over Dunnett's procedure are studied. The procedure is shown by real data to compare well with its predecessor.     

Synthetic and composite estimation under a superpopulation model

Under a simple superpopulation model for an arbitrary sampling design we derive optimal linear unbiased estimators/predictors of a mean in a domain. They can be viewed as synthetic and composite estimators of small area estimation theory when no auxiliary variable is available. Moreover, we show that the only requirement for optimality of a sampling strategy is to use any sampling plan of fixed sample size together with traditional estimators (as designed for simple random sampling without replacement). Finally, for symmetric sampling plans, simplified formulas (based on the first two moments of sample sizes) for optimal synthetic and composite estimators and their MSE’s are derived. Throughout the paper we consistently use the model-design setup.     

Economic design of quick switching sampling system for resubmitted lots

This paper proposes a quick switching sampling system for the inspection of attributes quality characteristics for resubmitted lots. The optimal parameters for both fraction non conforming items and fraction non conformities of the proposed sampling system are determined using an optimization procedure so that producer’s risk and consumer’s risk are simultaneously satisfied. Tables are also constructed for the selection of parameters for specified AQL and LQL. The advantage of the proposed plan over the existing plan is discussed and illustrate. An economic design of the proposed sampling system is also discussed and shown that the proposed sampling system has minimum total cost and average total inspection compared to other existing sampling plans.     

Sampling plans excluding contiguous units

We consider fixed size sampling plans for which the second order inclusion probabilities are zero for pairs of contiguous units and constant for pairs of non-contiguous units. A practical motivation for the use of such plans is pointed out and a statistical condition is identified under which these plans are more efficient than the corresponding simple random sampling plans. Results on the existence and construction of these plans are obtained.     

Optimal Design of Acceptance Sampling Plans by Variables for Nonconforming Proportions When the Standard Deviation Is Unknown

This article presents an optimization-based approach for the design of acceptance sampling plans by variables for controlling nonconforming proportions when the standard deviation is unknown. The variables are described by rigorous noncentral Student’s t-distributions. Single and double acceptance sampling (AS) plans are addressed. The optimal design results from minimizing the average sampling number (ASN), subject to conditions holding at producer’s and consumer’s required quality levels. The problem is then solved employing a nonlinear programming solver. The results obtained are in close agreement with previous sampling plans found in the literature, outperforming them regarding the feasibility.     

Simple random sample equivalent survey designs reducing undesirable units from a finite population

In this paper, we consider fixed size sampling plans for which the first order inclusion probabilities are identical for all units and the second order inclusion probabilities are constant for every pair-wise unit. The statistical conditions are identified under which these plans are equivalent to the usual simple random sampling plan. These sampling plans are constructed to reduce undesirable units.     

Stratified Double Sampling with Continuous Outcomes: Design and Analysis

We provide a method for estimating the sample mean of a continuous outcome in a stratified population using a double sampling scheme. The stratified sample mean is a weighted average of stratum specific means. It is assumed that the fallible and true outcome data are related by a simple linear regression model in each stratum. The optimal stratified double sampling plan, i.e. , the double sampling plan that minimizes the cost of sampling for fixed variances, or alternatively, minimizes the variance for fixed costs, is found and compared to a standard sampling plan. The design parameters are the total sample size and the number of doubly sampled units in each stratum. We show that the optimal double sampling plan is a function of the between-strata and within-strata cost and variance ratios. The efficiency gains, relative to standard sampling plans, under broad set of conditions, are considerable.     

Acceptance sampling plans for linear profiles with one-sided specifications

In this study, we propose three new sampling plans based on yield index C_puA for linear profiles with one-sided specifications, including the resubmitted sampling plan, the repetitive group sampling plan, and the multiple dependent state repetitive sampling plan. The operating characteristic functions of our proposed sampling plans are developed. The plan parameters of our proposed sampling plans are determined through nonlinear optimization. The plan parameters are reported for various combinations of acceptable quality level and limiting quality level. The three sampling plans are compared with the existing single sampling plan in terms of the average sample number. A real example is used to illustrate the applications.     

Minimum Size Double Sampling Plans for Large Isolated Lots

A common approach to the design of an acceptance sampling plan is to require that the operating characteristic (OC) curve should pass through two designated points that would fix the curve in accordance with a desired degree of discrimination. This paper presents a search procedure for the selection of double sampling inspection plans of type DSP - (0, 1) for specified two points on the OC curve, namely acceptance quality limit, producer's risk, limiting quality and consumer's risk. Selection of the plans is discussed for both the cases of fraction non-conforming and the number of non-conformities per unit.     

Selection of CSP-V continuous sampling plans

MIL-STD-1235C establishes standard procedures for the selection and implementation of single- and multi-level continuous sampling plans, such as CSP-1, CSP-F, CSP-2, CSP-T and CSP-V. CSP-V is a single-level continuous sampling procedure which provides for alternating sequences of 100%inspection (either at full or reduced clearance number) and sampling inspection. It requires a return to 100% inspection whenever a non-confirming unit is found during sampling inspection, but provides for a reduced clearance number upon demonstration of superior product quality. The CSP-V procedure serves as an alternative to the CSP-T procedure where a reduction in sampling frequency has no economic merit. In this paper, expressions for the average outgoing quality, the average fraction inspected and the operating characteristic function are derived using a Markov chain model. Four tables are given to enable the selection of CSP-V plans when the acceptable quality level or the limiting quality level and the

average outgoing quality limit are specified.