A note on the estimation of variance of sample mean Using the knowledge of coefficient of variation in normal population

A class of estimators for the variance of sample mean is defined and its properties are studied in case of normal population. It is identified that the usual unbiased estimator, Singh, Pandey and Hirano (1973) -type estimator and Lee (1931) estimator are particular members of the proposed class of estimators. It is found that the minimum Mean Squared Error (MSE) of the proposed class of estimators is less than that of other estimators.     

A new nonparametric estimator for the mean of the selected population

A modified bootstrap estimator of the mean of the population selected from two populations is proposed which is a convex combination of the two sample means, where the weights are random quantities. The estimator is shown to be strongly consistent. The small sample behavior of the estimator is investigated and compared with some competitors by means of Monte Carlo studies. It is found that the newly proposed estimator has smaller mean squared error for a wide range of parameter values.     

A generalized quantile estimator

An alternative to the conventional sample quantlle Is proposed as a nonparametrlc estimator of a continuous population quantlle.The alternative estimator Is a "generalized sample quantlle" obtained by averaging an appropriate subsample quantlle over all subsamples of .a fixed size.Since the resulting statistic is a U-statistic with representation also as a linear combination of order statistics, known results are employed then to establish asymptotic normality.The alternative estimator is shown to be asymptotically efficient in the class of nonparametrlc models specified by Pfanzagl (1975).Analytic results and Monte Carlo studies with a moderate sample size for a variety of distributions Indicate that the proposed estimator usually provides mean square error of estimation less than that of the conventional sample quantile.     

A family of efficient estimators of the finite population mean in simple random sampling

In this paper an estimator of the finite population mean using auxiliary information in sample surveys has been proposed. The bias and mean squared error are obtained under large sample approximation. It has been shown that the proposed estimator performs better than some recently published estimators.     

基于排序集样本和辅助变量中位数的均值比率估计方法

排序集抽样下利用辅助变量中位数构建了总体均值的改进比率估计模型,分析了该比率估计量的偏差和均方误差,并与简单随机抽样下的比率估计比较,证明了改进后的比率估计均方误差更小。以农作物播种面积和产量为研究对象进行实例分析,研究表明,基于排序集样本和辅助变量中位数的比率估计方法可以有效提高估计精度,验证了该构造方法的可行性。     

A note on calibration weightings for stratified double sampling with equal probability

This study proposes a more efficient calibration estimator for estimating population mean in stratified double sampling using new calibration weights. The variance of the proposed calibration estimator has been derived under large sample approximation. Calibration asymptotic optimum estimator and its approximate variance estimator are derived for the proposed calibration estimator and existing calibration estimators in stratified double sampling. Analytical results showed that the proposed calibration estimator is more efficient than existing members of its class in stratified double sampling. Analysis and evaluation are presented.     

Improved estimation of a finite population mean based on paired observations

This paper considers an improvement of the customary estimator of a finite population mean under a single stage sampling design when paired data, are available on each unit of the sample. Guided by the well known problem of “corninon mean”, a mixture i.e. a weighted combination of the mean of the principal characteristic and that of the auxiliary (possibly transformed) characteristic is proposed. It is shown that, under some conditions, improveinent (with respect to MSE) over the traditional estimator is possible for a broad range of the values of the mixing constant. An estimator of the MSE of the proposed estimator is also provided.     

Classes of estimators for population mean using auxiliary variable in stratified population in the presence of non response

In this article, we have proposed six classes of estimators for population mean using auxiliary variable in stratified population with known population mean in the presence of non response on the study variable. The properties of the proposed class of estimators have been studied for fixed sample size. An empirical study has been given in the support of the proposed classes of the estimator.     

Estimation of finite population mean in simple and stratified random sampling using two auxiliary variables

We propose an improved difference-cum-exponential ratio type estimator for estimating the finite population mean in simple and stratified random sampling using two auxiliary variables. We obtain properties of the estimators up to first order of approximation. The proposed class of estimators is found to be more efficient than the usual sample mean estimator, ratio estimator, exponential ratio type estimator, usual two difference type estimators, Rao (1991) estimator, Gupta and Shabbir (2008) estimator, and Grover and Kaur (2011) estimator. We use six real data sets in simple random sampling and two in stratified sampling for numerical comparisons.     

Change of origin and scale in ratio and difference methods of estimation in sampling

This paper discusses two estimators of the mean of a finite population based on a simple random sample from it, when supplementary information on a variable positively correlated with the variable of interest is available. Simultaneous reductions in absolute bias and mean square error of the estimator are seen as compared with those of the traditional estimator in the ratio method of estimation. The suggested estimators are simple for computation and there is no appreciable increase in the cost as well.     

Interchangeability of the ratio and product methods in sample surveys

The paper demonstrates the interchangeability of the ratio and product methods of estimation i n sample surveys through translati n g the unbiased estimator of the population total of the auxiiart variate (or the study varia te). The values of the translation parameters minimizing the mean squared error are obtained. The allowable departures from this optimum, which still ensure a reduction in the mean squared error, as compared to the traditional case, are indicated.     

An Interesting Property of the Sample Mean under a First-Order Autoregressive Model

The unweighted sample mean is examined as an estimator of the population mean in a first-order autoregressive model. It is demonstrated that the precision of this estimator deteriorates as the number of equally spaced observations taken within a fixed time interval increases.     

A modified estimator of population mean using power transformation

Summary In this paper we have suggested two modified estimators of population mean using power transformation. It has been shown that the modified estimators are more efficient than the sample mean estimator, usual ratio estimator, Sisodia and Dwivedi’s (1981) estimator and Upadhyaya and Singh’s (1999) estimator at their optimum conditions. Empirical illustrations are also given for examining the merits of the proposed estimators. Following Kadilar and Cingi (2003) the work has been extended to stratified random sampling, and the same data set has been studied to examine the performance in stratified random sampling.     

Finite sample properties of beale's ratio estimator

In this paper, the exact blas and mean square error of Beale's ratio estimator are derived under a blvariate normal nlodel in the form of an infinite series. It is found that some conventional large sample approxlmatlons are extremely poor if the relative variance of the auxlllary variable X is large. It is also brought out through this.study that Beale's estimator of the population mean seems to be more efficient than the usual sanple mean under the condition resulting from the large sample comparison of the customary ratio estimator and the usual sample mean.     

Calibrated estimators in two-stage sampling

We consider the problem of the estimation of the population mean of a study variable by assuming that the population means of an auxiliary variable are known at both stages of sample selection. The design weights at the first and second stages of sample selection are calibrated by optimizing the chi-squared type distance between the design weights and the new weights at both the first and second stages of sample selection. The regression type estimator in two-stage sampling is shown to be a special case. An application of the proposed estimators using a real data set is discussed.     

Estimating variances of strata in ranked set sampling

In RSS, the variance of observations in each ranked set plays an important role in finding an optimal design for unbalanced RSS and in inferring the population mean. The empirical estimator (i.e., the sample variance in a given ranked set) is most commonly used for estimating the variance in the literature. However, the empirical estimator does not use the information in the entire data over different ranked sets. Further, it is highly variable when the sample size is not large enough, as is typical in RSS applications. In this paper, we propose a plug-in estimator for the variance of each set, which is more efficient than the empirical one. The estimator uses a result in order statistics which characterizes the cumulative distribution function (CDF) of the rth order statistics as a function of the population CDF. We analytically prove the asymptotic normality of the proposed estimator. We further apply it to estimate the standard error of the RSS mean estimator. Both our simulation and empirical study show that our estimators consistently outperform existing methods.     

An Improved Range Estimator of Sigma for Determining Sample Sizes

The use of a range estimator of the population standard deviation, sigma (σ), for determining sample sizes is discussed in this study. Standardized mean ranges (d_n's), when divided into the ranges of sampling frames, provide estimates of the standard deviation of the population. These estimates can be used for determining sample sizes. The d_n's are provided for seven different distributions for sampling frame sizes that range from 2 to 2000, For each of the seven distributions, functional relationships are developed such that d_n = f(n_SF) where n_SF is the size of the sample frame. From these functions, d_n's can be estimated for sampling frame sizes which are not presented in the study.     

Imputation by power transformation

In this paper, a new power transformation estimator of population mean in the presence of non-response has been suggested. The estimator of mean obtained from proposed technique remains better than the estimators obtained from ratio or mean methods of imputation. The mean squared error of the resultant estimator is less than that of the estimator obtained on the basis of ratio method of imputation for the optinum choice of parameters. An estimator for estimating a parameter involved in the process of new method of imputation has been discussed. The MSE expressions for the proposed estimators have been derived analytically and compared empirically. Product method of imputation for negatively correlated variables has also been introduced. The work has been extended to the case of multi-auxiliary information to be used for imputation.     

Two zs are Better than One

Given only a random sample of observations, the usual estimator for the population mean is the sample mean. If additional information is provided it might be possible in some situations to obtain a better estimator. The situation considered here is when the variable whose mean is sought is composed of factors that are themselves observable. In the basic case, the variable can be expressed as the product of two, independent, more basic variables, but we also consider the case of more than two, the effect of correlation, and when there are observation costs.     

Ratio estimators based on a ranked set sample in a finite population setting

This paper considers the ratio estimator in a finite population setting in a ranked set sampling (RSS) design, where the sample is constructed either with or without replacement policies. It is shown that the proposed ratio estimator is slightly biased, but the amount of bias is smaller than the amount of bias of a simple random sample (SRS) ratio estimator. For the proposed ratio estimator, the paper provides explicit expressions for its mean square error and precision relative to the other competing estimators. It is shown that the new estimator has a substantial amount of improvement in efficiency with respect to SRS estimator. The proposed estimator is applied to two different finite population settings to estimate population mean.