Optimum Designs for Estimation of Parameters in a Quadratic Mixture-Amount Model

The authors propose a mixture-amount model, which is quadratic both in the proportions of mixing components and the amount of mixture. They attempt to find the A- and D-optimal designs for the estimation of the model parameters within a subclass of designs. The optimality of the derived designs in the entire class of competing designs has been investigated through equivalence theorem.     

Optimal multi-criteria designs for Fourier regression models

Riccomagno, Schwabe and Wynn (RSW) (1997) have given a necessary and sufficient condition for obtaining a complete Fourier regression model with a design based on lattice points that is D-optimal. However, in practice, the number of factors to be considered may be large, or the experimental data may be restricted or not homogeneous. To address these difficulties we extend the results of RSW to obtain a sufficient condition for an incomplete interaction Fourier model design based on lattice points that is D-, A-, E- and G-optimal. We also propose an algorithm for finding such optimal designs that requires fewer design points than those obtained using RSW's generators when the underlying model is a complete interaction model.     

Optimal and efficient designs for 2-parameter nonlinear models

By Carathéodory's theorem, for a k-parameter nonlinear model, the minimum number of support points for any D-optimal design is between k and k(k+1)/2. Characterizing classes of models for which a D-optimal design sits on exactly k support points is of great theoretical interest. By utilizing the equivalence theorem, we identify classes of 2-parameter nonlinear models for which a D-optimal design is precisely supported on 2 points. We also introduce the theory of maximum principle from differential equations into the design area and obtain some results on characterizing the minimally supported nonlinear designs. Examples are given to demonstrate our results. Designs with minimum number of support points may not always be suitable in practice. To alleviate this problem, we utilize some geometric and analytical methods to obtain some efficient designs which provide more opportunity for the model checking and prevent biases due to mis-specified initial parameters.     

A-optimal designs for optimum mixture in an additive quadratic mixture model

In the analysis of experiments with mixtures, quadratic models have been widely used. The optimum designs for the estimation of optimum mixing proportions in a quadratic mixture model have been studied by Pal and Mandal [Optimum designs for optimum mixtures. Statist Probab Lett. 2006;76:1369–1379] and Mandal et al. [Optimum mixture designs: a pseudo-Bayesian approach. J Ind Soc Agric Stat. 2008;62(2):174–182; Optimum mixture designs under constraints on mixing components. Statist Appl. 2008;6(1&2) (New Series): 189–205], using a pseudo-Bayesian approach. In this paper, a similar approach has been employed to obtain the A-optimal designs for the estimation of optimum proportions in an additive quadratic mixture model, proposed by Darroch and Waller [Additivity and interaction in three-component experiments with mixture. Biometrika. 1985;72:153–163], when the number of components is 3, 4 and 5. It has been shown that the vertices of the simplex are necessarily the support points of the optimum design, and the other support points include barycentres of depth at most 2.     

Optimal regression designs in the presence of random block effects

A- and D-optimal regression designs under random block-effects models are considered. We first identify certain situations where D- and A-optimal designs do not depend on the intra-block correlation and can be obtained easily from the optimal designs under uncorrelated models. For example, for quadratic regression on [−1,1], this covers D-optimal designs when the block size is a multiple of 3 and A-optimal designs when the block size is a multiple of 4. In general, the optimal designs depend on the intra-block correlation. For quadratic regression, we provide expressions for D-optimal designs for any block size. A-optimal designs with blocks of size 2 for quadratic regression are also obtained. In all the cases considered, robust designs which do not depend on the intrablock correlation can be constructed.     

Extensions of D-optimal minimal designs for symmetric mixture models

The purpose of mixture experiments is to explore the optimum blends of mixture components, which will provide the desirable response characteristics in finished products. D-optimal minimal designs have been considered for a variety of mixture models, including Scheffé's linear, quadratic, and cubic models. Usually, these D-optimal designs are minimally supported since they have just as many design points as the number of parameters. Thus, they lack the degrees of freedom to perform the lack-of-fit (LOF) tests. Also, the majority of the design points in D-optimal minimal designs are on the boundary: vertices, edges, or faces of the design simplex. In this article, extensions of the D-optimal minimal designs are developed for a general mixture model to allow additional interior points in the design space to enable prediction of the entire response surface. Also a new strategy for adding multiple interior points for symmetric mixture models is proposed. We compare the proposed designs with Cornell (1986 Cornell, J.A. (1986). A comparison between two ten-point designs for studying three-component mixture systems. J. Qual. Technol. 18(1):1–15.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) two 10-point designs for the LOF test by simulations.     

Some sufficient conditions for the type 1 optimality of block designs

In this paper, we investigate the problem of determining block designs which are optimal under type 1 optimality criteria within various classes of designs having υ treatments arranged in b blocks of size k. The solutions to two optimization problems are given which are related to a general result obtained by Cheng (1978) and which are useful in this investigation. As one application of the solutions obtained, the definition of a regular graph design given in Mitchell and John (1977) is extended to that of a semi-regular graph design and some sufficient conditions are derived for the existence of a semi-regular graph design which is optimal under a given type 1 criterion. A result is also given which shows how the sufficient conditions derived can be used to establish the optimality under a specific type 1 criterion of some particular types of semi- regular graph designs having both equal and unequal numbers of replicates. Finally,some sufficient conditions are obtained for the dual of an A- or D-optimal design to be A- or D-optimal within an appropriate class of dual designs.     

On Exact K-optimal Designs Minimizing the Condition Number

A new design criterion based on the condition number of an information matrix is proposed to construct optimal designs for linear models, and the resulting designs are called K-optimal designs. The relationship between exact and asymptotic K-optimal designs is derived. Since it is usually hard to find exact optimal designs analytically, we apply a simulated annealing algorithm to compute K-optimal design points on continuous design spaces. Specific issues are addressed to make the algorithm effective. Through exact designs, we can examine some properties of the K-optimal designs such as symmetry and the number of support points. Examples and results are given for polynomial regression models and linear models for fractional factorial experiments. In addition, K-optimal designs are compared with A-optimal and D-optimal designs for polynomial regression models, showing that K-optimal designs are quite similar to A-optimal designs.     

Bayesian A- and D-optimal designs for gamma regression model with inverse link function

Bayesian optimal designs have received increasing attention in recent years, especially in biomedical and clinical trials. Bayesian design procedures can utilize the available prior information of the unknown parameters so that a better design can be achieved. With this in mind, this article considers the Bayesian A- and D-optimal designs of the two- and three-parameter Gamma regression model. In this regard, we first obtain the Fisher information matrix of the proposed model and then calculate the Bayesian A- and D-optimal designs assuming various prior distributions such as normal, half-normal, gamma, and uniform distribution for the unknown parameters. All of the numerical calculations are handled in R software. The results of this article are useful in medical and industrial researches.     

D-optimal weighing designs and optimal chemical balance weighing designs for estimating the total weight

This paper provides D-optimal spring balance designs for estimating individual weights when the number of objects to be weighed in each weighing, B, is fixed. D-optimal chemical balance designs for estimating total weight under both homogeneous and nonhomogeneous error variances are found when the number of objects weighed in each weighing is ≥ B, a fixed number.

We indicate the restriction used in Chacko & Dey(1978) and Kageyama(1988), i.e. that chemical designs X be restricted to designs in which exactly “a” objects are replaced on the left pan and exactly “b” on the right pan in each of the weighings for a, b > 0, is unnecessary.     

Optimal designs for experiments with mixtures: a survey

This is a survey article on known results about analytic solutions and numerical solutions of optimal designs for various regression models for experiments with mixtures. The regression models include polynomial models, models containing homogeneous functions, models containing inverse terms and ratios, log contrast models, models with quantitative variables, and mod els containing the amount of mixture, Optimality criteria considered include D-, A-, E-,φ_p- and I_λ-Optimalities. Uniform design and uniform optimal design for mixture components, and efficiencies of the {q,2} simplex-controid design are briefly discussed.     

Bayesian D-optimal designs for exponential regression models

We consider the Bayesian D-optimal design problem for exponential growth models with one, two or three parameters. For the one-parameter model conditions on the shape of the density of the prior distribution and on the range of its support are given guaranteeing that a one-point design is also Bayesian D-optimal within the class of all designs. In the case of two parameters the best two-point designs are determined and for special prior distributions it is proved that these designs are Bayesian D-optimal. Finally, the exponential growth model with three parameters is investigated. The best three-point designs are characterized by a nonlinear equation. The global optimality of these designs cannot be proved analytically and it is demonstrated that these designs are also Bayesian D-optimal within the class of all designs if gamma-distributions are used as prior distributions.     

Optimal designs for generalized linear models

Summary This paper solves some D-optimal design problems for certain Generalized Linear Models where the mean depends on two parameters and two explanatory variables. In all of the cases considered the support point of the optimal designs are found to be independent of the unknown parameters. While in some cases the optimal design measures are given by two points with equal weights, in others the support is given by three point with weights depending on the unknown parameters, hence the designs are locally optimal in general. Empirical results on the efficiency of the locally optimal designs are also given. Some of the designs found can also be used for planning D-optimal experiments for the normal linear model, where the mean must be positive. This research was carried out in part at University College, London as an M.Sc. project. Thanks are due to Prof. I. Ford (University of Glasgow) and Prof. A. Giovagnoli (University of Perugia) for their valuable suggestions and critical observations.     

D-optimal designs with minimal and nearly minimal number of units

D-optimal designs are identified in classes of connected block designs with fixed block size when the number of experimental units is one or two more than the minimal number required for the design to be connected. An application of one of these results is made to identify D-optimal designs in a class of minimally connected row-column designs. Graph-theoretic methods are employed to arrive at the optimality results.     

A note on robustness of D-optimal block designs for two-colour microarray experiments

Two-colour microarray experiments form an important tool in gene expression analysis. Due to the high risk of missing observations in microarray experiments, it is fundamental to concentrate not only on optimal designs but also on designs which are robust against missing observations. As an extension of Latif et al. (2009), we define the optimal breakdown number for a collection of designs to describe the robustness, and we calculate the breakdown number for various D-optimal block designs. We show that, for certain values of the numbers of treatments and arrays, the designs which are D-optimal have the highest breakdown number. Our calculations use methods from graph theory.     

A note on trend-free block designs

Trend-free and nearly trend-free block designs were developed to eliminate polynomial trends across the plots of experimental designs. Yeh, Bradley and Notz (1985) proved that certain nearly trend-free designs are A- and D-optimal in a subclass of all competing designs. This article extends that result by enlarging the class of designs for which the optimality holds, and by increasing the class of optimality criteria from A- and D-optimality to the class of all Schur-convex nonincreasing functions.     

Optimum mixture designs in a restricted region

In a mixture experiment, the response depends on the proportions of the mixing components. Canonical models of different degrees and also other models have been suggested to represent the mean response. Optimum designs for estimation of the parameters of the models have been investigated by different authors. In most cases, the optimum design includes the vertex points of the simplex as support points of the design, which are not mixture combinations in the true non-trivial sense. In this paper, optimum designs have been obtained when the experimental region is an ellipsoidal subspace of the entire factor space which does not cover the vertex points of the simplex.     

Optimal designs in random coefficient cubic regression models

In this article we investigate the problem of ascertaining A- and D-optimal designs in a cubic regression model with random coefficients. Our interest lies in estimation of all the parameters or in only those except the intercept term. Assuming the variance ratios to be known, we tabulate D-optimal designs for various combinations of the variance ratios. A-optimality does not pose any new problem in the random coefficients situation.     

On the Choice of a Prior for Bayesian D-Optimal Designs for the Logistic Regression Model with a Single Predictor

The Bayesian design approach accounts for uncertainty of the parameter values on which optimal design depends, but Bayesian designs themselves depend on the choice of a prior distribution for the parameter values. This article investigates Bayesian D-optimal designs for two-parameter logistic models, using numerical search. We show three things: (1) a prior with large variance leads to a design that remains highly efficient under other priors, (2) uniform and normal priors lead to equally efficient designs, and (3) designs with four or five equidistant equally weighted design points are highly efficient relative to the Bayesian D-optimal designs.     

Optimum designs for parameter estimation in a mixture experiment with two correlated responses

In this paper, we investigate a mixture problem with two responses, which are functions of the mixing proportions, and are correlated with known dispersion matrix. We obtain D- and A-optimal designs for estimating the parameters of the response functions, when none or some of the regression coefficients of the two functions are the same. It is shown that when no prior knowledge about the regression coefficients is available, the D-optimal design is independent of the dispersion matrix, while the A-optimal design depends on it, provided the response functions are of different degree. On the other hand, when some of the regression coefficients are known to be the same for both the functions, the D-optimal design depends on the dispersion matrix when the two response functions are not of the same degree.