Addition of runs to a two-level supersaturated design

The purpose of this article is to introduce a new class of extended E(s²)-optimal two level supersaturated designs obtained by adding runs to an existing E(s²)-optimal two level supersaturated design. The extended design is a union of two optimal SSDs belonging to different classes. New lower bound to E(s²) has been obtained for the extended supersaturated designs. Some examples and a small catalogue of E(s²)-optimal SSDs are also included.     

A basic lemma and the analysis of block and Kronecker product designs

In this paper the analysis of the class of block designs whose C matrix can be expressed in terms of the Kronecker product of some elementary matrices is considered. The analysis utilizes a basic result concerning the spectral decomposition of the Kronecker product of symmetric matrices in terms of the spectral decomposition of the component matrices involved in the Kronecker product. The property (A) of Kurkjian and Zelen (1963) is generalised and the analysis of generalised property (A) designs is given. It is proved that a design is balanced factorially if and only if it is a generalised property (A) design. A method of analysis of Kronecker product block designs whose component designs are equi-replicate and proper is also suggested.     

Some new group divisible designs

The paper lists fourteen new group divisible PBIB/2 designs, which were obtained using the computer program described in John (1976).     

Minimum projection uniformity for computer experiment with quantitative factors

Computer experiments involving quantitative factors at high levels are becoming more and more important in the study of complex experiments arising in the area of science and engineering. Uniform designs are found to be widely applicable in computer experiments in the form of space-filling designs. In this paper, the projection uniformity for quantitative designs is studied under wrap-around $L_2$-discrepancy. A lower bound of uniformity pattern for general asymmetric designs is provided, which can be used to serve as a benchmark for both comparing different designs and also to determine the optimal design. As a byproduct, a lower bound of wrap-around $L_2$-discrepancy measure for the asymmetric design is also obtained. Some illustrative examples and numerical comparisons are also provided for supporting our theoretical results.     

Some mixed orthogonal arrays obtained by orthogonal projection matrices

The method of orthogonal decomposition of projection matrices is used to construct mixed orthogonal arrays of strength two. Several series of tight orthogonal arrays are constructed by using difference schemes. This method is also used to obtain some new 72-run, 100-run, and 108-run orthogonal arrays.     

Comparison of designs equivalent under one or two criteria

Two designs equivalent under one or two criteria may be compared under other criteria. For certain configurations of eigenvalues of the information matrices, we decide which design is the better of the two for many other such criteria. The relationship to universal optimality (in the case of equivalence under one criterion) is indicated. For two criteria, applications are given to weighing and treatment-with-covariate settings.     

A unified theory for generalized cyclic designs

Properties of abelian groups are used to unify the construction of cyclic and generalized cyclic designs. Necessary and sufficient conditions are obtained for the generation of fractional sets of blocks, and also for the generation of resolvable designs. It is shown how to apply these results in conjunction with efficiency arguments to obtain useful designs.     

Some methods for constructing C-designs

Block designs having a property described by Caliński (1971) and Saha (1976), referred to as C-property, are further considered. A necessary and sufficient condition for a block design to have the C-property is given by Saha (1976) and another by Ceranka and Koz?owska (1983). In this paper some methods for constructing such block designs are presented.     

Generalizing Clatworthy group divisible designs

In this paper a neat construction is provided for three new families of group divisible designs that generalize some designs from Clatworthy's table of the only 11 designs with two associate classes that have block size four, three groups, and replication numbers at most 10. In each case (namely, _λ1=4${\lambda }_1=4$ and _λ2=5${\lambda }_2=5$, _λ1=4${\lambda }_1=4$ and _λ2=2${\lambda }_2=2$, and _λ1=8${\lambda }_1=8$ and _λ2=4${\lambda }_2=4$), we have proved that the necessary conditions found are also sufficient for the existence of such GDD's with block size four and three groups, with one possible exception.     

On group divisible response surface (GDRS) designs

In this paper some experimental situations are identified corresponding to which suitable response surface designs do not exist. A class of response surface designs is introduced to cope with these situations. Their analysis with and without blocking and methods of construction is discussed.     

Some Methods of Construction of Gd-Rc and Rectangular-rc Designs

A number of methods of construction of GD-RC and RectanguIar-RC designs, based upon the series A of BIB-RC designs, using the method of Kronecker product, are developed.     

A survey and evaluation of methods for determination of combinatorial equivalence of factorial designs

Equivalent factorial designs have identical statistical properties for estimation of factorial contrasts and for model fitting. Non-equivalent designs, however, may have the same statistical properties under one particular model but different properties under a different model. In this paper, we describe known methods for the determination of equivalence or non-equivalence of two-level factorial designs, whether they be regular factorial designs, non-regular orthogonal arrays, or have no particular structure. In addition, we evaluate a number of potential fast screening methods for detecting non-equivalence of designs. Although the paper concentrates mainly on symmetric designs with factors at two levels, we also evaluate methods of determining combinatorial equivalence and non-equivalence of three-level designs and indicate extensions to larger numbers of levels and to asymmetric designs.     

Run orders for efficient two level experimental plans with minimum factor level changes robust to time trends

In this paper we construct run orders of orthogonal arrays with 12≤n≤28$12\le n\le 28$ runs and 4≤q≤6$4\le q\le 6$ factors that minimize the number of level changes of each factor. The corresponding orthogonal arrays can estimate a model with all main effects and their two factor interactions with the highest efficiency and also provide estimates of all main effects that are independent of linear and quadratic time (or position) trends. Some alternative efficient run orders are also presented when the estimation of two factor interactions is of experimental interest.     

Designs for cropping systems research

The present article establishes equivalence between extended group divisible (EGD) designs and designs for crop sequence experiments. This equivalence has encouraged the agricultural experimenters to use EGD designs for their experimentation. Some real life applications of EGD designs have been given. It has also been shown that several existing association schemes are special cases of EGD association scheme. Some methods of construction of EGD designs are also given. A catalogue of EGD designs obtainable through methods of construction along with efficiency factors of various factorial effects is also presented. In some crop sequence experiments that are conducted to develop suitable integrated nutrient supply system of a crop sequence, the treatments do not comprise of a complete factorial structure. The experimenter is interested in estimating the residual and direct effect of the treatments along with their cumulative effects. For such experimental settings block designs with two sets of treatments applied in succession are the appropriate designs. The correspondence established between row–column designs and block designs for two stage experiments by Parsad et al. [2003. Structurally incomplete row–column designs. Comm. Statist. Theory Methods 32(1), 239–261] has been exploited in obtaining designs for such experimental situations. Some open problems related to designing of crop sequence experiments are also given.     

Regular group divisible designs and Bhaskar Rao designs with block size three

Some recursive constructions are given for Bhaskar Rao designs. Using examples of these designs found by Shyam J. Singh, Rakesh Vyas and new ones given here we show the necessary conditions λ≡0 (mod 2), λυ(υ?1)≡0 (mod 24) are sufficient for the existence of Bhaskar Rao designs with one association class and block size 3. This result is used with a result of Street and Rodger to obtain regular partially balanced block designs with 2υ treatments, block size 3, λ₁=0, group size 2 and υ groups.     

Interaction balance for symmetrical factorial designs with generalized minimum aberration

There are two different systems of contrast parameterization when analyzing the interaction effects among the factors with more than two levels, i.e., linear-quadratic system and orthogonal components system. Based on the former system and an ANOVA model, Xu and Wu (2001) introduced the generalized wordlength pattern for general factorial designs. This paper shows that the generalized wordlength pattern exactly measures the balance pattern of interaction columns of a symmetrical design ground on the orthogonal components system, and thus an alternative angle to look at the generalized minimum aberration criterion is given. This work is partially supported by NNSF of China grant No. 10231030.     

A construction for generalized hadamard matrices

We prove that if p^r and p^r ? 1 are both prime powers then there is a generalized Hadamard matrix of order p^r(p^r ? 1) with elements from the elementary abelian group Z_p x?x Z_p. This result was motivated by results of Rajkundia on BIBD's. This result is then used to produce p^r ? 1 mutually orthogonal F-squares F(p^r(p^r ? 1); p^r ? 1).     

Two third-order rotatable designs in four dimensions

New third-order rotatable designs in four dimensions are derived from third-order rotatable designs in two dimensions. When these designs are used the results of the experiments performed according to the two-dimensional designs need not be discarded. Further, one of the derived designs requires only sixty points whereas the smallest of the third-order rotatable designs in four dimensions available in the literature require seventy two points.     

Some properties of a linear combination CUSUM statistic for controlling a multivariate mean vector

We develop a class of new multivariate procedures for monitoring quality by detecting a change in the level of a multivariate process. Following the ideas of S.N. Roy, we first consider a linear combination statistic which results from projecting the multivariate observations onto a unit vector and then maximizing a selected univariate statistic over all directions.     

Some new constructions of circular balanced repeated measurements designs

Repeated measurements designs are widely used in medicine, pharmacology, animal sciences, and psychology. In this article, some infinite series are developed to generate the balanced repeated measurements designs for p (periods) even. For p odd, construction procedures are also described. Catalogues of the proposed designs are also presented for p = 5, 7, 9, when v ≤ 100.