ARL-unbiased control charts for the monitoring of exponentially distributed characteristics based on type-II censored samples

In this paper, the problem of monitoring process data that can be modelled by exponential distribution is considered when observations are from type-II censoring. Such data are common in many practical inspection environment. An average run length unbiased (ARL-unbiased) control scheme is developed when the in-control scale parameter is known. The performance of the proposed control charts are investigated in terms of the ARL and standard deviation of the run length. The effects of parameter estimation on the proposed control charts are also evaluated. Then, we consider the design of the ARL-unbiased control charts when the in-control scale parameter is estimated. Finally, an example is used to illustrate the implementation of the proposed control charts.     

Reduction of control-chart signal variablity for high-quality processes

The design of a control chart is often based on the statistical measure of average run length (ARL). A longer in-control ARL is ensured by the design, but the variance run length distribution may also be large for such a design. In practical terms, the variability in false alarms and true signals may be large. If the sample size for plotting a point is not constant, then the focus is on the average number inspected as against the ARL. This article considers two well-known attribute control chart procedures for monitoring high quality based on the number inspected, and shows how the variability in false alarms and correct signals can be reduced.     

Control charts based on dependent count data with deflation or inflation of zeros

The process of serially dependent counts with deflation or inflation of zeros is commonly observed in many applications. This paper investigates the monitoring of such a process, the first-order zero-modified geometric integer-valued autoregressive process (ZMGINAR(1)). In particular, two control charts, the upper-sided and lower-sided CUSUM charts, are developed to detect the shifts in the mean process of the ZMGINAR(1). Both the average run length performance and the standard deviation of the run length performance of these two charts are investigated by using Markov chain approaches. Also, an extensive simulation is conducted to assess the effectiveness or performance of the charts, and the presented methods are applied to two sets of real data arising from a study on the drug use.     

A new S2 control chart using repetitive sampling

A new S² control chart is presented for monitoring the process variance by utilizing a repetitive sampling scheme. The double control limits called inner and outer control limits are proposed, whose coefficients are determined by considering the average run length (ARL) and the average sample number when the process is in control. The proposed control chart is compared with the existing Shewhart S² control chart in terms of the ARLs. The result shows that the proposed control chart is more efficient than the existing control chart in detecting the process shift.     

Improving the performance of the zone control chart

A general model for the zone control chart is presented. Using this model, it is shown that there are score vectors for zone control charts which result in superior average run length performance in comparison to Shewhart charts with common runs rules.

A fast initial response (FIR) feature for the zone control chart is also proposed. Average run lengths of the zone control chart with this feature are calculated. It is shown that the FIR feature improves zone control chart performance by providing significantly earlier signals when the process is out of control.     

The Synthetic Mean Square Error Control Chart

A synthetic mean square error (MSE) control chart is presented in this study for monitoring the changes in the mean and standard deviation of a normally distributed process. The synthetic MSE control chart is a combination of the standard MSE control chart and the conforming run length (CRL) control chart. From the numerical comparisons, the synthetic MSE control chart is always more efficient than the standard MSE control chart in detecting shifts in the process mean and standard deviation. The synthetic MSE chart also performs better than the exponentially weighted moving average-semicircle (EWMA-SC) chart, except for some cases where the process mean shifts are small.     

CUSUM control schemes for Gaussian processes

A CUSUM control scheme for detecting a change point in a Gaussian process is derived. An upper and a lower bound for the distribution of the run length and for its moments is given. In a Monte Carlo study the average run length (ARL) of this chart is compared with the ARL of two other CUSUM procedures which are based on approximations to the sequential probability ratio, and, moreover, with EWMA schemes for autocorrelated data. Results on the optimal choice of the reference value are presented. Furthermore it is investigated how these charts behave if the model parameters are estimated.     

西藏农村居民消费支出发展趋势的GM(1,1)预测模型及因素分析

本文以近9年西藏自治区农村居民人均生活消费支出为研究对象,应用灰色系统理论建立了人均消费支出指标发展趋势的 预测模型,分析得出：在未来四年中西藏农村人均生活消费支出平均年增长率预计达到14.2%。运用关联度分析方法确定了反映农村居民消费水平的八项主要统计指标因素相对于消费支出的关联程度,对影响消费支出的主要指标因素进行了系统的分析。     

A new synthetic control chart for monitoring process mean using auxiliary information

ABSTRACT

Quality control charts have been widely recognized as a potentially powerful statistical process monitoring tool in statistical process control because of their superior ability in detecting shifts in the process parameters. Recently, auxiliary-information-based control charts have been proposed and shown to have excellent speed in detecting process shifts than those based without it. In this paper, we design a new synthetic control chart that is based on a statistic that utilizes information from both the study and auxiliary variables. The proposed synthetic chart encompasses the classical synthetic chart. The construction, optimal design, run length profiles, and the performance evaluation of the new chart are discussed in detail. It turns out that the proposed synthetic chart performs uniformly better than the classical synthetic chart when detecting different kinds of shifts in the process mean under both zero-state and steady-state run length performances. Moreover, with reasonable assumptions, the proposed chart also surpasses the exponentially weighted moving average control chart. An application with a simulated data set is also presented to explain the implementation of the proposed control chart.     

Graph based isomorph-free generation of two-level regular fractional factorial designs

We provide a new necessary and sufficient check for testing the isomorphism of two 2-level regular fractional factorial designs. The approach is based on modeling fractional factorial designs as bipartite graphs. We employ an efficient canonical graph labeling approach to compare two designs for isomorphism. We then improve upon the existing non-isomorphic fractional factorial design generation algorithm by reducing the number of candidate designs from which isomorphs need to be removed. Not only does our method generate non-isomorphic designs much faster, it is also able to generate designs with run sizes of 2048 and 4096 runs, which were not generated by the existing methods.     

中国能源消费水平空间差异及成因研究

本文运用离差指标来测度中国能源消费水平空间差异,并将离差平方之和分解为地区内差异和地区间差异,使得能够测算总体差异的地区构成;将离差绝对值之和分解为各影响因素贡献份额,使得能够找出影响地区差异的主要影响因素。研究结果表明中国能源消费水平空间差异不断扩大;能源消费水平总体差异主要是由三大地区内部差异引起的,其中地区内部差异主要来自于东部地区;人均资本存量是影响我国能源消费水平空间差异的主要因素。本文据此提出相应的政策建议。     

Performance of the zone control chart

Average run lengths of the zone control chart are presented, The performance of this chart is compared with that of several Shewhart charts with and without runs rules, It is shown that the standard zone control chart has performance similar to some even simpler charts and a much higher false alarm rate than the Shewhart chart with all of the common runs rules. It is also shown that a slightly modified zone control chart outperforms the Shewhart chart with the common runs rules.     

An investigation of the effects of inspection errors on the run-length control charts

For continuous inspection schemes in an automated manufacturing environment, a useful alternative to the traditional p or np chart is the Run-Length control chart, which is based on plotting the run lengths (the number of conforming items) between successive nonconforming items. However, its establishment relies on the error-free inspection assumption, which can seldom be met in practice. In this paper, the effects of inspection errors on the Run-Length chart are investigated based on that these errors are assumed known. The actual false alarm probability and the average number inspected (ANI) in the presence of inspection errors are studied. This paper also presents the adjusted control limits for the Run-Length chart, which can provide much closer ANI curves to the ones obtained under error-free inspection.     

A new distribution-free control scheme based on order statistics

We establish a class of nonparametric Shewhart-type control charts based on a reference sample drawn from the process. The proposed nonparametric control chart takes advantage of the location of two different order statistics of the reference and test sample respectively. The decision rule of the new monitoring scheme is filled out by the number of test observations that are located between the control limits. The general setup of the new class of control charts is presented in detail, while the operating characteristic function is studied for both in- and out-of-control processes. Closed formulae for the evaluation of the alarm rate and the average run length are concluded for plausible shift in the underlying distribution to Lehmann alternatives. Several numerical results, displayed for the new family of nonparametric control charts, depict that the proposed control scheme attains competitive performance.     

An improved mean deviation exponentially weighted moving average control chart to monitor process dispersion under ranked set sampling

Quality-control charts are widely used to monitor and detect shifts in the process mean and dispersion. Abbasi and Miller [MDEWMA chart: an efficient and robust alternative to monitor process dispersion, J Stat Comput Simul 2013;83:247–268] suggested a robust mean deviation exponentially weighted moving average (MDEWMA) control chart for monitoring process dispersion under simple random sampling. In this study, an improved MDEWMA (IMDEWMA) control chart is proposed under ranked set sampling to monitor process dispersion. Detailed Monte Carlo simulations are performed from symmetric and asymmetric populations to investigate the performances of the proposed and existing control charts in terms of average run length (ARL), median run length and standard deviation of run length. An application to real-life data is also presented to illustrate the use of the IMDEWMA control chart. It is observed that the IMDEWMA control chart indicates a shift in process dispersion substantially quicker than the MDEWMA control chart, while maintaining comparable ARLs when the process is in control.     

A new adaptive EWMA control chart using auxiliary information for monitoring the process mean

The adaptive memory-type control charts, including the adaptive exponentially weighted moving average (EWMA) and cumulative sum (CUSUM) charts, have gained considerable attention because of their excellent speed in providing overall good detection over a range of mean shift sizes. In this paper, we propose a new adaptive EWMA (AEWMA) chart using the auxiliary information for efficiently monitoring the infrequent changes in the process mean. The idea is to first estimate the unknown process mean shift using an auxiliary information based mean estimator, and then adaptively update the smoothing constant of the EWMA chart. Using extensive Monte Carlo simulations, the run length profiles of the AEWMA chart are computed and explored. The AEWMA chart is compared with the existing control charts, including the classical EWMA, CUSUM, synthetic EWMA and synthetic CUSUM charts, in terms of the run length characteristics. It turns out that the AEWMA chart performs uniformly better than these control charts when detecting a range of mean shift sizes. An illustrative example is also presented to demonstrate the working and implementation of the proposed and existing control charts.     

An exponentially weighted moving average chart controlling false discovery rate

A new control chart is developed by using the exponentially weighted moving average (EWMA) statistics and a multiple testing procedure for controlling false discovery rate. The multiple testing procedure considers not only the current EWMA statistic, but also a given number of previous statistics at the same time. Numerical simulations are accomplished to evaluate the performance of the proposed control chart in terms of the average run length and the conditional expected delay. The results are compared with those of the existing control charts including the X-bar chart, EWMA, and cumulative sum control charts. Case studies with real data-sets are also presented.     

Time truncated attribute control chart for the Weibull distribution using multiple dependent state sampling

In this article, an attribute control chart is proposed for time truncated tests using the Weibull distribution. The design of proposed control chart is presented using the multiple dependent state (MDS) sampling. The control chart coefficients are determined for various specified average run length. The efficiency of the proposed control chart is elaborated with the help of a simulation data and a real data. The proposed control chart perform better than the existing control chart in terms of average run length.     

“十二五”至2030年我国经济增长前景展望

 综合考虑未来国内外影响经济增长的因素及其变化,本文采用可计算一般均衡模型模拟了中国经济增长的三种情景。结果显示“十二五”期间经济增长速度可望接近8%左右,中长期内中国经济仍然具有较快增长的潜力;未来经济增长的主要风险在于经济发展的协调性较差,资源环境压力不断加大;能否发挥经济增长潜力的关键在于能否实现发展方式转变。     

Shewhart x-charts with estimated process variance

Properties of the Shewhart X-chart for controlling the mean of a process with a normal distribution are investigated for the situation where the process variance Ó²must be estimated from initial sample data. The control limits of the X-chart depend on the estimate of Ó²and thus, unlike the case when Ó²is known, the X-chart is not equivalent to a sequence of independent tests. When Ó²is estimated the distribution of the run length is not geometric and cannot be characterized simply in terms of the probability of a signal at a given point. The average run length (ARL) for the X-chart is expressed in terms of an integral involving the normal cdf, and it is shown that the chart signals with

probability one, but the ARL may not be finite if the size of the 2 sample used to estimate Ó²is sufficiently small. In addition, certain bounds for the ARL are also derived. Numerical integration is use to show that the effect of using small sample sizes in estimating Ó²is to increase the ARL and the variance of the run length distribution