An Evaluation of the Double Exponentially Weighted Moving Average Control Chart

In this article we perform a careful investigation of the double exponentially weighted moving average (DEWMA) chart performance for monitoring the process mean. We compare the performance of this chart to the usual EWMA control chart based on zero-state and worst-case average run length (ARL) measures. We also evaluate the signal resistance measure of the DEWMA chart and compare its maximum value to that of the EWMA chart. We show that the superiority of the DEWMA chart over the simpler standard EWMA chart based on zero-state ARL performance disappears when the smoothing constant of the EWMA chart is chosen to give weights to past observations closer to those given by the DEWMA chart. Moreover, our results show that the standard EWMA chart has much better performance than the DEWMA chart in terms of worst-case ARL values, especially when small smoothing constants are used. We also demonstrate using an illustrative example that the DEWMA chart can build up an exceedingly large amount of inertia when used to monitor the process mean.     

Fast initial response features for EWMA control charts

The exponentially weighted moving average (EWMA) control chart became very popular during the last decade. It is characterized by simple handling and good performance. It turns out, however, that the most popular EWMA scheme with fixed-width control limits—the asymptotic control limits are taken and do not change over time—detects early changes rather slowly. For the competing CUSUM chart the so-called fast initial response (head-start) feature is developed which permits rapid response to an initial out-of-control situation. Meanwhile, in some papers similar modifications for EWMA schemes are described. We compare these approaches by using precise computation techniques, which are based on numeric quadrature rules and allow higher accuracy than earlier studies. Moreover, previous comparisons are restricted to the evaluation of the detection speed by comparing the average run lengths (ARLs), that is, the parameter of interest is constant during the whole monitoring period. Here, we consider more possible change point locations, which gives the EWMA control chart user a better insight into the scheme performance for early changes. *** DIRECT SUPPORT *** A00T7005 00004     

Effect of measurement error on exponentially weighted moving average control charts under ranked set sampling schemes

Control charts are a powerful statistical process monitoring tool often used to monitor the stability of manufacturing processes. In quality control applications, measurement errors adversely affect the performance of control charts. In this paper, we study the effect of measurement error on the detection abilities of the exponentially weighted moving average (EWMA) control charts for monitoring process mean based on ranked set sampling (RSS), median RSS (MRSS), imperfect RSS (IRSS) and imperfect MRSS (IMRSS) schemes. We also study the effect of multiple measurements and non-constant error variance on the performances of the EWMA control charts. The EWMA control chart based on simple random sampling is compared with the EWMA control charts based on RSS, MRSS, IRSS and IMRSS schemes. The performances of the EWMA control charts are evaluated in terms of out-of-control average run length and standard deviation of run lengths. It turns out that the EWMA control charts based on MRSS and IMRSS schemes are better than their counterparts for all measurement error cases considered here.     

Phase I Analysis of Multiple Linear Regression Profiles

This article considers the Phase I analysis of data when the quality of a process or product is characterized by a multiple linear regression model. This is usually referred to as the analysis of linear profiles in the statistical quality control literature. The literature includes several approaches for the analysis of simple linear regression profiles. Little work, however, has been done in the analysis of multiple linear regression profiles. This article proposes a new approach for the analysis of Phase I multiple linear regression profiles. Using this approach, regardless of the number of explanatory variables used to describe it, the profile response is monitored using only three parameters, an intercept, a slope, and a variance. Using simulation, the performance of the proposed method is compared to that of the existing methods for monitoring multiple linear profiles data in terms of the probability of a signal. The advantage of the proposed method over the existing methods is greatly improved detection of changes in the process parameters of linear profiles with high-dimensional space. The article also proposes useful diagnostic aids based on F-statistics to help in identifying the source of profile variation and the locations of out-of-control samples. Finally, the use of multiple linear profile methods is illustrated by a data set from a calibration application at National Aeronautics and Space Administration (NASA) Langley Research Center.     

Conditional design of the EWMA median chart with estimated parameters

The exponentially weighted moving average (EWMA) chart is often designed assuming the process parameters are known. In practice, the parameters are rarely known and need to be estimated from Phase I samples. Different Phase I samples are used when practitioners construct their own control chart's limits, which leads to the “Phase I between-practitioners” variability in the in-control average run length (ARL) of control charts. The standard deviation of the ARL (SDARL) is a good alternative to quantify this variability in control charts. Based on the SDARL metric, the performance of the EWMA median chart with estimated parameters is investigated in this paper. Some recommendations are given based on the SDARL metric. The results show that the EWMA median chart requires a much larger amount of Phase I data in order to reduce the variation in the in-control ARL up to a reasonable level. Due to the limitation of the amount of the Phase I data, the suggested EWMA median chart is designed with the bootstrap method which provides a good balance between the in-control and out-of-control ARL values.     

Accurate ARL computation for EWMA-S<Superscript>2</Superscript> control charts

Originally, the exponentially weighted moving average (EWMA) control chart was developed for detecting changes in the process mean. The average run length (ARL) became the most popular performance measure for schemes with this objective. When monitoring the mean of independent and normally distributed observations the ARL can be determined with high precision. Nowadays, EWMA control charts are also used for monitoring the variance. Charts based on the sample variance S² are an appropriate choice. The usage of ARL evaluation techniques known from mean monitoring charts, however, is difficult. The most accurate method—solving a Fredholm integral equation with the Nyström method—fails due to an improper kernel in the case of chi-squared distributions. Here, we exploit the collocation method and the product Nyström method. These methods are compared to Markov chain based approaches. We see that collocation leads to higher accuracy than currently established methods.     

Generally weighted moving average control charts with fast initial response features

The generally weighted moving average (GWMA) control chart is an extension model of exponentially weighted moving average (EWMA) control chart. Recently, some approaches have been proposed to modify EWMA charts with fast initial response (FIR) features. We introduce these approaches in GWMA-type charts. Via simulation, various control schemes are designed and then their average run lengths are computed and compared. Based on the overall performance, it is showed that the DGWMA chart is the best choice especially when the shift is moderate, and the GWMA charts provided with additional FIR feature have a good performance only in detecting large shifts during the initial stage.     

A a comparison of the markov chain and the integral equation approaches for evaluating the run length distribution of quality control charts

Two methods that are often used to evaluate the run length distribution of quality control charts are the Markov chain and integral equation approaches. Both methods have been used to evaluate the cumulative sum (CUSUM) charts and the exponentially weighted moving average (EWMA) control charts. The Markov chain approach involves "discretiz-ing" the possible values which can be plotted. Using properties of finite Markov chains, expressions for the distribution of the run length, and for the average run length (ARL), can be obtained. For the CUSUM and EWMA charts there exist integral equations whose solution gives the ARL. Approximate methods can then be used to solve the integral equation. In this article we show that if the product midpoint rule is used to approximate the integral in the integral equation, then both approaches yield the same approximations for the ARL. In addition we show that the recursive expressions for the probability functions are the same for the two approaches. These results establish the integral equation approach as preferable whenever an integral equation can be found     

Monitoring simple linear profiles using variable sample size schemes

ABSTRACT

Profile monitoring is one of the new research areas in statistical process control. Most of the control charts in this area are designed with fixed sampling rate which makes the control chart slow in detecting small to moderate shifts. In order to improve the performance of the conventional fixed control charts, adaptive features are proposed in which, one or more design parameters vary during the process. In this paper the variable sample size feature of EWMA₃ and MEWMA schemes are proposed for monitoring simple linear profiles. The EWMA₃ method is based on the combination of three exponentially weighted moving average (EWMA) charts for monitoring three parameters of a simple linear profile separately and the Multivariate EWMA (MEWMA) chart is based on the using a single chart to monitor the coefficients and variance of a general linear profile. Also a two-sided control chart is proposed for monitoring the standard deviation in the EWMA₃ method. The performance of the proposed charts is compared in terms of the average time to signal. Numerical examples show that using adaptive features increase the power of control charts in detecting the parameter shifts. Finally, the performance of the proposed variable sample size schemes is illustrated through a real case in the leather industry.     

Profile Monitoring Using Nonparametric Bootstrap T 2 Control Chart

In certain statistical process control applications, performance of a product or process can be monitored effectively using a linear profile or a linear relationship between a response variable and one or more explanatory variables. In this article, we design a nonparametric bootstrap control chart for monitoring simple linear profiles based on T ² statistic. We evaluate the performance of the proposed method in phase II. The average and standard deviation of the run length under different shifts in the intercept, slope, and standard deviation are considered as the performance measures. Simulation results show that the performance of the proposed bootstrap control chart improves as the size of the available data increases.     

Sequential monitoring of high-dimensional time series

In the paper we derive new types of multivariate exponentially weighted moving average (EWMA) control charts which are based on the Euclidean distance and on the distance defined by using the inverse of the diagonal matrix consisting of the variances. The design of the proposed control schemes does not involve the computation of the inverse covariance matrix and, thus, it can be used in the high-dimensional setting. The distributional properties of the control statistics are obtained and are used in the determination of the new control procedures. Within an extensive simulation study, the new approaches are compared with the multivariate EWMA control charts which are based on the Mahalanobis distance.     

Statistical Monitoring of Nominal Logistic Profiles in Phase II

Statistical analysis of profile monitoring, a relatively new sub-area of statistical process control due to its applications in different industries, have urged researchers and practitioners to contribute to the developments of new monitoring methods. A statistical profile is a relationship between a quality characteristic (a response) and one or more independent variables to characterize quality of a process or a product. In this article, statistical profiles based on nominal responses are studied, where logistic regression is used to model the responses. Three approaches including likelihood ratio test (LRT), multivariate exponentially weighted moving average (MEWMA), and support vector machines (SVM) approaches are proposed to monitor quality of a process or product in Phase II. Performances of the proposed approaches are evaluated and compared using a case study. Moreover, the effect of two important factors on average run length (ARL) performance, number of levels and number of covariates, has been considered. Results indicate that performance of all approaches depends on the number of covariates and levels. As the number of these factors increases, SVM performance improves while performance of the other approaches deteriorates.     

A new approach for monitoring process variance

ABSTRACT

Control charts are effective tools for signal detection in both manufacturing processes and service processes. Much service data come from a process with variables having non-normal or unknown distributions. The commonly used Shewhart variable control charts, which depend heavily on the normality assumption, should not be properly used in such circumstances. In this paper, we propose a new variance chart based on a simple statistic to monitor process variance shifts. We explore the sampling properties of the new monitoring statistic and calculate the average run lengths (ARLs) of the proposed variance chart. Furthermore, an arcsine transformed exponentially weighted moving average (EWMA) chart is proposed because the ARLs of this modified chart are more intuitive and reasonable than those of the variance chart. We compare the out-of-control variance detection performance of the proposed variance chart with that of the non-parametric Mood variance (NP-M) chart with runs rules, developed by Zombade and Ghute [Nonparametric control chart for variability using runs rules. Experiment. 2014;24(4):1683–1691], and the nonparametric likelihood ratio-based distribution-free exponential weighted moving average (NLE) chart and the combination of traditional exponential weighted moving average (EWMA) mean and EWMA variance (CEW) control chart proposed by Zou and Tsung [Likelihood ratio-based distribution-free EWMA control charts. J Qual Technol. 2010;42(2):174–196] by considering cases in which the critical quality characteristic has a normal, a double exponential or a uniform distribution. Comparison results showed that the proposed chart performs better than the NP-M with runs rules, and the NLE and CEW control charts. A numerical example of service times with a right-skewed distribution from a service system of a bank branch in Taiwan is used to illustrate the application of the proposed variance chart and of the arcsine transformed EWMA chart and to compare them with three existing variance (or standard deviation) charts. The proposed charts show better detection performance than those three existing variance charts in monitoring and detecting shifts in the process variance.     

Bayesian X̄ control limits for exponentially distributed measurements

This article deals with the construction of an X? control chart using the Bayesian perspective. We obtain new control limits for the X? chart for exponentially distributed data-generating processes through the sequential use of Bayes’ theorem and credible intervals. Construction of the control chart is illustrated using a simulated data example. The performance of the proposed, standard, tolerance interval, exponential cumulative sum (CUSUM) and exponential exponentially weighted moving average (EWMA) control limits are examined and compared via a Monte Carlo simulation study. The proposed Bayesian control limits are found to perform better than standard, tolerance interval, exponential EWMA and exponential CUSUM control limits for exponentially distributed processes.     

On increasing the sensitivity of mixed EWMA–CUSUM control charts for location parameter

Control chart is an important statistical technique that is used to monitor the quality of a process. Shewhart control charts are used to detect larger disturbances in the process parameters, whereas cumulative sum (CUSUM) and exponential weighted moving average (EWMA) are meant for smaller and moderate changes. In this study, we enhanced mixed EWMA–CUSUM control charts with varying fast initial response (FIR) features and also with a runs rule of two out of three successive points that fall above the upper control limit. We investigate their run-length properties. The proposed control charting schemes are compared with the existing counterparts including classical CUSUM, classical EWMA, FIR CUSUM, FIR EWMA, mixed EWMA–CUSUM, 2/3 modified EWMA, and 2/3 CUSUM control charting schemes. A case study is presented for practical considerations using a real data set.     

An Improved Distribution-free EWMA Mean Chart

Control charts are effective tools for signal detection in both manufacturing processes and service processes. Much service data come from a process with variables having nonnormal or unknown distributions. The commonly used Shewhart variable control charts, which depend heavily on the normality assumption, should not be properly used here. In this article, we propose an improved asymmetric EWMA mean chart based on a simple statistic to monitor process mean shift. We explored the sampling properties of the new monitoring statistic and calculated the average run lengths of the proposed asymmetric EWMA mean chart. We recommend the proposed improved asymmetric EWMA mean chart because the average run lengths of the modified charts are more accurate and reasonable than those of the five existed mean charts. A numerical example of service times with a right skewed distribution from a service system of a bank branch is used to illustrate the application of the improved asymmetric EWMA mean chart and to compare it with the five existing mean charts. The proposed chart showed better detection performance than those of the five existing mean charts in monitoring and detecting shifts in the process mean.     

A EWMA control chart based on an auxiliary variable and repetitive sampling for monitoring process location

ABSTRACT

This article develops an exponentially weighted moving average (EWMA) control chart using an auxiliary variable and repetitive sampling for efficient detection of small to moderate shifts in location. A EWMA statistic of a product estimator of the average (which utilities the information of auxiliary variables as well as repetitive sampling) is plotted on the proposed chart. The control chart coefficients of the proposed EWMA chart are determined for two strategic limits known as outer and inner control limits for the target in-control average run length. The performance of the proposed EWMA chart is studied using average run length when a shift occurs in the process average. The efficiency of the developed chart is compared with the competitive existing control charts. The results of the study revealed that proposed EWMA chart is more efficient than others to detect small changes in process mean.     

Design of a sign chart using a new EWMA statistic

Abstract

In this article, a new non parametric control chart based on the modified or controlled exponentially weighted moving average (EWMA) statistic is developed to monitor the process deviation from the target value. The proposed control chart is evaluated for different values of design parameters using the average run length as a performance criterion under various sample sizes. The proposed chart is compared with the existing non parametric EWMA sign control chart. It is observed that the proposed chart is better than the existing EWMA sign control chart in terms of run length characteristics. An empirical example is provided for the practical implementation of the proposed chart.     

Robustness of the EWMA and the combined X¯–EWMA control charts with variable sampling intervals to non-normality

The exponentially weighted moving average (EWMA) control charts with variable sampling intervals (VSIs) have been shown to be substantially quicker than the fixed sampling intervals (FSI) EWMA control charts in detecting process mean shifts. The usual assumption for designing a control chart is that the data or measurements are normally distributed. However, this assumption may not be true for some processes. In the present paper, the performances of the EWMA and combined X¯–EWMA control charts with VSIs are evaluated under non-normality. It is shown that adding the VSI feature to the EWMA control charts results in very substantial decreases in the expected time to detect shifts in process mean under both normality and non-normality. However, the combined X¯–EWMA chart has its false alarm rate and its detection ability is affected if the process data are not normally distributed.     

Robustness to non-normality and autocorrelation of individuals control charts

This paper studies the effects of non-normality and autocorrelation on the performances of various individuals control charts for monitoring the process mean and/or variance. The traditional Shewhart X chart and moving range (MR) chart are investigated as well as several types of exponentially weighted moving average (EWMA) charts and combinations of control charts involving these EWMA charts. It is shown that the combination of the X and MR charts will not detect small and moderate parameter shifts as fast as combinations involving the EWMA charts, and that the performana of the X and MR charts is very sensitive to the normality assumption. It is also shown that certain combinations of EWMA charts can be designed to be robust to non-normality and very effective at detecting small and moderate shifts in the process mean and/or variance. Although autocorrelation can have a significant effect on the in-control performances of these combinations of EWMA charts, their relative out-of-control performances under independence are generally maintained for low to moderate levels of autocorrelation.