A Note on Stagewise Regression

Suppose one estimates the coefficient β₂ in E[Y] = β₀ + β₁ X ₁ + β₂ X ₂ by stagewise regression. That is, first the model E[Y] ≌ β₀ + β₁ X ₁ is fit using simple linear regression followed by a simple linear regression of the residuals from this model on X ₂ to yield the estimator β₂. The ratio of the squared t statistic for the estimate b ₂ from multiple regression to the squared t statistic for β₂ is greater than or equal to 1.0 and is shown to be a convenient function of correlation coefficients among Y, X ₁, and X ₂. Examination of stagewise regression can provide useful insights when introducing concepts of multiple regression.     

A study on the least squares estimator of multivariate isotonic regression function

Consider the problem of pointwise estimation of f in a multivariate isotonic regression model Z=f(X₁,…,X_d)+ϵ, where Z is the response variable, f is an unknown nonparametric regression function, which is isotonic with respect to each component, and ϵ is the error term. In this article, we investigate the behavior of the least squares estimator of f. We generalize the greatest convex minorant characterization of isotonic regression estimator for the multivariate case and use it to establish the asymptotic distribution of properly normalized version of the estimator. Moreover, we test whether the multivariate isotonic regression function at a fixed point is larger (or smaller) than a specified value or not based on this estimator, and the consistency of the test is established. The practicability of the estimator and the test are shown on simulated and real data as well.     

Non parametric regression estimations over Lp risk based on biased data

Using a wavelet basis, Chesneau and Shirazi study the estimation of one-dimensional regression functions in a biased non parametric model over L² risk (see Chesneau, C and Shirazi, E. Non parametric wavelet regression based on biased data, Communication in Statistics – Theory and Methods, 43: 2642–2658, 2014). This article considers d-dimensional regression function estimation over L^p?(1 ? p < ∞) risk. It turns out that our results reduce to the corresponding theorems of Chesneau and Shirazi’s theorems, when d = 1 and p = 2.     

A Note on Fitting a Regression without an Intercept Term

By entering the data (y _i ,x _i ) followed by (–y _i ,–x _i ), one can obtain an intercept-free regression Y = Xβ + ε from a program package that normally uses an intercept term. There is no bias in the resultant regression coefficients, but a minor postanalysis adjustment is needed to the residual variance and standard errors.     

Feasible robust estimator in restricted semiparametric regression models based on the LTS approach

Under some nonstochastic linear restrictions based on either additional information or prior knowledge in a semiparametric regression model, a family of feasible generalized robust estimators for the regression parameter is proposed. The least trimmed squares (LTS) method proposed by Rousseeuw as a highly robust regression estimator is a statistical technique for fitting a regression model based on the subset of h observations (out of n) whose least-square fit possesses the smallest sum of squared residuals. The coverage h may be set between n/2 and n. The LTS estimator involves computing the hyperplane that minimizes the sum of the smallest h squared residuals. For practical purpose, it is assumed that the covariance matrix of the error term is unknown and thus feasible estimators are replaced. Then, we develop an algorithm for the LTS estimator based on feasible methods. Through the Monte Carlo simulation studies and a real data example, performance of the feasible type of robust estimators is compared with the classical ones in restricted semiparametric regression models.     

Jump-detection and curve estimation methods for discontinuous regression functions based on the piecewise B-spline function

Jump-detection and curve estimation methods for the discontinuous regression function are proposed in this article. First, two estimators of the regression function based on B-splines are considered. The first estimator is obtained when the knot sequence is quasi-uniform; by adding a knot with multiplicity p + 1 at a fixed point x₀ on support [a, b], we can obtain the second estimator. Then, the jump locations are detected by the performance of the difference of the residual sum of squares DRSS(x₀) (x₀ ∈ (a, b)); subsequently the regression function with jumps can be fitted based on piecewise B-spline function. Asymptotic properties are established under some mild conditions. Several numerical examples using both simulated and real data are presented to evaluate the performance of the proposed method.     

Combining the unrestricted estimators into a single estimator and a simulation study on the unrestricted estimators

The purpose of this paper is to combine several regression estimators (ordinary least squares (OLS), ridge, contraction, principal components regression (PCR), Liu, r?k and r?d class estimators) into a single estimator. The conditions for the superiority of this new estimator over the PCR, the r?k class, the r?d class, β?(k, d), OLS, ridge, Liu and contraction estimators are derived by the scalar mean square error criterion and the estimators of the biasing parameters for this new estimator are examined. Also, a numerical example based on Hald data and a simulation study are used to illustrate the results.     

A New Regression Model: Modal Linear Regression

The mode of a distribution provides an important summary of data and is often estimated on the basis of some non‐parametric kernel density estimator. This article develops a new data analysis tool called modal linear regression in order to explore high‐dimensional data. Modal linear regression models the conditional mode of a response Y given a set of predictors x as a linear function of x . Modal linear regression differs from standard linear regression in that standard linear regression models the conditional mean (as opposed to mode) of Y as a linear function of x . We propose an expectation–maximization algorithm in order to estimate the regression coefficients of modal linear regression. We also provide asymptotic properties for the proposed estimator without the symmetric assumption of the error density. Our empirical studies with simulated data and real data demonstrate that the proposed modal regression gives shorter predictive intervals than mean linear regression, median linear regression and MM‐estimators.     

Empirical Comparison of Nonparametric Regression Estimates on Real Data

The performance of nine different nonparametric regression estimates is empirically compared on ten different real datasets. The number of data points in the real datasets varies between 7, 900 and 18, 000, where each real dataset contains between 5 and 20 variables. The nonparametric regression estimates include kernel, partitioning, nearest neighbor, additive spline, neural network, penalized smoothing splines, local linear kernel, regression trees, and random forests estimates. The main result is a table containing the empirical L₂ risks of all nine nonparametric regression estimates on the evaluation part of the different datasets. The neural networks and random forests are the two estimates performing best. The datasets are publicly available, so that any new regression estimate can be easily compared with all nine estimates considered in this article by just applying it to the publicly available data and by computing its empirical L₂ risks on the evaluation part of the datasets.     

Robust ridge and robust Liu estimator for regression based on the LTS estimator

In the multiple linear regression analysis, the ridge regression estimator and the Liu estimator are often used to address multicollinearity. Besides multicollinearity, outliers are also a problem in the multiple linear regression analysis. We propose new biased estimators based on the least trimmed squares (LTS) ridge estimator and the LTS Liu estimator in the case of the presence of both outliers and multicollinearity. For this purpose, a simulation study is conducted in order to see the difference between the robust ridge estimator and the robust Liu estimator in terms of their effectiveness; the mean square error. In our simulations, the behavior of the new biased estimators is examined for types of outliers: X-space outlier, Y-space outlier, and X-and Y-space outlier. The results for a number of different illustrative cases are presented. This paper also provides the results for the robust ridge regression and robust Liu estimators based on a real-life data set combining the problem of multicollinearity and outliers.     

A Note on the Regression of Order Statistics

This paper examines the relationships between the mean residual life functions of parallel and k-out-of-n systems with the regression of order statistics. Using these relationships, the results and properties about the mean residual life function of those systems can be used for the regression of order statistics and vice versa. Finally, the paper proposes a definition for the mean residual life function of a k-out-of-n system when the number of failed components of the system is known.     

Diagnosis of Multivariate Control Chart Signal Based on Dummy Variable Regression Technique

Abstract

It is common to monitor several correlated quality characteristics using the Hotelling's T ² statistic. However, T ² confounds the location shift with scale shift and consequently it is often difficult to determine the factors responsible for out of control signal in terms of the process mean vector and/or process covariance matrix. In this paper, we propose a diagnostic procedure called ‘D-technique’ to detect the nature of shift. For this purpose, two sets of regression equations, each consisting of regression of a variable on the remaining variables, are used to characterize the ‘structure’ of the ‘in control’ process and that of ‘current’ process. To determine the sources responsible for an out of control state, it is shown that it is enough to compare these two structures using the dummy variable multiple regression equation. The proposed method is operationally simpler and computationally advantageous over existing diagnostic tools. The technique is illustrated with various examples.     

Standard and robust orthogonal regression

A fast routine for converting regression algorithms into corresponding orthogonal regression (OR) algorithms was introduced in Ammann and Van Ness (1988). The present paper discusses the properties of various ordinary and robust OR procedures created using this routine. OR minimizes the sum of the orthogonal distances from the regression plane to the data points. OR has three types of applications. First, L ₂ OR is the maximum likelihood solution of the Gaussian errors-in-variables (EV) regression problem. This L ₂ solution is unstable, thus the robust OR algorithms created from robust regression algorithms should prove very useful. Secondly, OR is intimately related to principal components analysis. Therefore, the routine can also be used to create L ₁, robust, etc. principal components algorithms. Thirdly, OR treats the x and y variables symmetrically which is important in many modeling problems. Using Monte Carlo studies this paper compares the performance of standard regression, robust regression, OR, and robust OR on Gaussian EV data, contaminated Gaussian EV data, heavy-tailed EV data, and contaminated heavy-tailed EV data.     

Cluster-based multivariate outlier identification and re-weighted regression in linear models

A cluster methodology, motivated by a robust similarity matrix is proposed for identifying likely multivariate outlier structure and to estimate weighted least-square (WLS) regression parameters in linear models. The proposed method is an agglomeration of procedures that begins from clustering the n-observations through a test of ‘no-outlier hypothesis’ (TONH) to a weighted least-square regression estimation. The cluster phase partition the n-observations into h-set called main cluster and a minor cluster of size n?h. A robust distance emerge from the main cluster upon which a test of no outlier hypothesis’ is conducted. An initial WLS regression estimation is computed from the robust distance obtained from the main cluster. Until convergence, a re-weighted least-squares (RLS) regression estimate is updated with weights based on the normalized residuals. The proposed procedure blends an agglomerative hierarchical cluster analysis of a complete linkage through the TONH to the Re-weighted regression estimation phase. Hence, we propose to call it cluster-based re-weighted regression (CBRR). The CBRR is compared with three existing procedures using two data sets known to exhibit masking and swamping. The performance of CBRR is further examined through simulation experiment. The results obtained from the data set illustration and the Monte Carlo study shows that the CBRR is effective in detecting multivariate outliers where other methods are susceptible to it. The CBRR does not require enormous computation and is substantially not susceptible to masking and swamping.     

Robust group-Lasso for functional regression model

In this article, we consider the problem of selecting functional variables using the L1 regularization in a functional linear regression model with a scalar response and functional predictors, in the presence of outliers. Since the LASSO is a special case of the penalized least-square regression with L1 penalty function, it suffers from the heavy-tailed errors and/or outliers in data. Recently, Least Absolute Deviation (LAD) and the LASSO methods have been combined (the LAD-LASSO regression method) to carry out robust parameter estimation and variable selection simultaneously for a multiple linear regression model. However, variable selection of the functional predictors based on LASSO fails since multiple parameters exist for a functional predictor. Therefore, group LASSO is used for selecting functional predictors since group LASSO selects grouped variables rather than individual variables. In this study, we propose a robust functional predictor selection method, the LAD-group LASSO, for a functional linear regression model with a scalar response and functional predictors. We illustrate the performance of the LAD-group LASSO on both simulated and real data.     

Bivariate exponential-type distributions with linear regression

Let Xbe a bivariate exponential-type random vector (BIDLIKAR, PATIL (1968)), than it is proved:

1. If P(X ≥0) = 1 is valid, then Xhas linear regression to both directions if and only if Xpossesses a symmetric Γ-distribution.

2. Xpossesses linear regression to both directions with constant regression coefficients (independent of the parameter vector ? of the exponential-type distribution (BIDLIKAR, PATIL (1968)) if and only if Xis normal distributed.     

K-medoids inverse regression

Abstract

K-means inverse regression was developed as an easy-to-use dimension reduction procedure for multivariate regression. This approach is similar to the original sliced inverse regression method, with the exception that the slices are explicitly produced by a K-means clustering of the response vectors. In this article, we propose K-medoids clustering as an alternative clustering approach for slicing and compare its performance to K-means in a simulation study. Although the two methods often produce comparable results, K-medoids tends to yield better performance in the presence of outliers. In addition to isolation of outliers, K-medoids clustering also has the advantage of accommodating a broader range of dissimilarity measures, which could prove useful in other graphical regression applications where slicing is required.     

Improved Score Tests in Symmetric Linear Regression Models

The class of symmetric linear regression models has the normal linear regression model as a special case and includes several models that assume that the errors follow a symmetric distribution with longer-than-normal tails. An important member of this class is the t linear regression model, which is commonly used as an alternative to the usual normal regression model when the data contain extreme or outlying observations. In this article, we develop second-order asymptotic theory for score tests in this class of models. We obtain Bartlett-corrected score statistics for testing hypotheses on the regression and the dispersion parameters. The corrected statistics have chi-squared distributions with errors of order O(n ^?3/2), n being the sample size. The corrections represent an improvement over the corresponding original Rao's score statistics, which are chi-squared distributed up to errors of order O(n ^?1). Simulation results show that the corrected score tests perform much better than their uncorrected counterparts in samples of small or moderate size.     

R 2 Measures Based on Wald and Likelihood Ratio Joint Significance Tests

Two methods are suggested for generating R ² measures for a wide class of models. These measures are linked to the R ² of the standard linear regression model through Wald and likelihood ratio statistics for testing the joint significance of the explanatory variables. Some currently used R ²'s are shown to be special cases of these methods.     

Bayesian hypothesis testing for selected regression coefficients

ABSTRACT

We develop new Bayesian regression tests for prespecified regression coefficients. Simple, closed forms of the Bayes factors are derived that depend only on the regression t-statistic and F-statistic and the usual associated t and F distributions. The priors that allow those forms are simple and also meaningful, requiring minimal but practically important subjective inputs.