Minimax designs for estimating slopes in a trigonometric regression model

Abstract

Designs for the first order trigonometric regression model over an interval on the real line are considered for the situation where estimation of the slope of the response surface at various points in the factor space is of primary interest. Minimization of the variance of the estimated slope at a point maximized over all points in the region of interest is taken as the design criterion. Optimal designs under the minimax criterion are derived for the situation where the design region and the region of interest are identical and a symmetric “partial cycle”. Some comparisons of the minimax designs with the traditional D- and A-optimal designs are provided. Efficiencies of some exact designs under the minimax criterion are also investigated.     

On the Superiority of a Variable Sampling Interval Control Chart

The paper establishes the analytical grounds of the uniform superiority of a variable sampling interval (VSI) Shewhart control chart over the conventional fixed sampling interval (FSI) control chart, with respect to the zero-time performance, for a wide class of process distributions. We provide a sufficient condition on the distribution of a control chart statistic, and propose a criterion to determine the control limits and the regions in the in-control area of the VSI chart, corresponding to the different sampling intervals used by it. The condition and the criterion together ensure the uniform zero-time superiority of the VSI chart over the matched FSI chart, in detecting a process shift of any magnitude. It is shown that normal, Student's t and Laplace distributions satisfy the sufficient condition. In addition, chi-square, F and beta distributions satisfy it, provided that these are not extremely skewed. Further, it is illustrated that the superiority of the VSI feature is not trivial and cannot be assured if the sufficient condition is not satisfied or the control limits and the regions are not determined according to the proposed criterion. An application of the result to confirm the superiority of the VSI feature is demonstrated for the control chart for individual observations used to monitor a milk-pouch filling process.     

Superiority of the r-k class estimator over some estimators in a misspecified linear model

ABSTRACT

In this article, we discuss the superiority of r-k class estimator over some estimators in a misspecified linear model. We derive the necessary and sufficient conditions for the superiority of the r-k class estimator over each of these estimators under the Mahalanobis loss function by the average loss criterion in the misspecified linear model.     

Improved pretest nonparametric estimation in a multivariate regression model

Shrinkage pretest nonparametric estimation of the location parameter vector in a multivariate regression model is considered when nonsample information (NSI) about the regression parameters is available. By using the quadratic risk criterion, the dominance of the pretest estimators over the usual estimators has been investigated. We demonstrate analytically and computationally that the proposed improved pretest estimator establishes a wider dominance range for the parameter under consideration than that of the usual pretest estimator in which it is superior over the unrestricted estimator.     

Minimum aberration criterion for screening experiments at two levels from an entropy-based perspective

This paper presents a new criterion for selecting a two-level fractional factorial design. The theoretical underpinning for the criterion is the Shannon entropy. The criterion, which is referred to as the entropy-based minimum aberration criterion, has several advantages. The advantage of the entropy-based criterion over the classical minimum aberration criterion is that it utilizes a measure of uncertainty on the skewness of the distribution of word length patterns in the selection of the “best” design in a family of two-level fractional factorial plans. The criterion evades the trauma associated with the lack of prior knowledge on the important effects.     

Autoregressive model selection based on a prediction perspective

The autoregressive (AR) model is a popular method for fitting and prediction in analyzing time-dependent data, where selecting an accurate model among considered orders is a crucial issue. Two commonly used selection criteria are the Akaike information criterion and the Bayesian information criterion. However, the two criteria are known to suffer potential problems regarding overfit and underfit, respectively. Therefore, using them would perform well in some situations, but poorly in others. In this paper, we propose a new criterion in terms of the prediction perspective based on the concept of generalized degrees of freedom for AR model selection. We derive an approximately unbiased estimator of mean-squared prediction errors based on a data perturbation technique for selecting the order parameter, where the estimation uncertainty involved in a modeling procedure is considered. Some numerical experiments are performed to illustrate the superiority of the proposed method over some commonly used order selection criteria. Finally, the methodology is applied to a real data example to predict the weekly rate of return on the stock price of Taiwan Semiconductor Manufacturing Company and the results indicate that the proposed method is satisfactory.     

Exploratory assessment of dose proportionality: review of current approaches and proposal for a practical criterion

This article reviews currently used approaches for establishing dose proportionality in Phase I dose escalation studies. A review of relevant literature between 2002 and 2006 found that the power model was the preferred choice for assessing dose proportionality in about one-third of the articles. This article promotes the use of the power model and a conceptually appealing extension, i.e. a criterion based on comparing the 90% confidence interval for the ratio of predicted mean values from the extremes of the dose range (R(dnm)) to pre-defined equivalence criterion (theta(L),theta(U)). The choice of bioequivalence default values of theta(L)=0.8 and theta(U)=1.25 seems reasonable for dose levels only a doubling apart but are impractically strict when applied over the complete dose range. Power calculations are used to show that this prescribed criterion lacks power to conclude dose proportionality in typical Phase I dose-escalation studies. A more lenient criterion with values theta(L)=0.5 and theta(U)=2 is proposed for exploratory dose proportionality assessments across the complete dose range.     

On Some Two- and Three-dimensional D-minimax Designs for Estimating Slopes of a Third-order Response Surface

Design of experiments is considered for the situation where estimation of the slopes of a response surface is the main interest. Under the D-minimax criterion, the objective is to minimize the generalized variance of the estimated axial slopes at a point maximized over all points in the region of interest in the factor space. For the third-order model over spherical regions, the D-minimax designs are derived in two and three dimensions. The efficiencies of some two- and three-dimensional designs available in the literature are also investigated.     

THE SMALL SAMPLE PROPERTIES OF THE PRINCIPAL COMPONENTS ESTIMATOR FOR REGRESSION COEFFICIENTS

ABSTRACT

Under the mean square error matrix (MSEM) criterion and Pitman closeness (PC) criterion, the principal components estimator (PRCE) is compared with the least square estimator (LSE) and the superiority of PRCE over LSE is achieved respectively. Finally, we examine the superiority of PRCE predictor over the LSE predictor based on these two criteria.     

On minimax designs when there are two candidate models

This work is motivated by the need to find experimental designs which are robust under different model assumptions. We measure robustness by calculating a measure of design efficiency with respect to a design optimality criterion and say that a design is robust if it is reasonably efficient under different model scenarios. We discuss two design criteria and an algorithm which can be used to obtain robust designs. The first criterion employs a Bayesian-type approach by putting a prior or weight on each candidate model and possibly priors on the corresponding model parameters. We define the first criterion as the expected value of the design efficiency over the priors. The second design criterion we study is the minimax design which minimizes the worst value of a design criterion over all candidate models. We establish conditions when these two criteria are equivalent when there are two candidate models. We apply our findings to the area of accelerated life testing and perform sensitivity analysis of designs with respect to priors and misspecification of planning values.     

Risk comparison of the Stein-rule estimator in a linear regression model with omitted relevant regressors and multivariate<Emphasis Type="Italic">t</Emphasis> errors under the Pitman nearness criterion

In this paper we consider a linear regression model with omitted relevant regressors and multivariatet error terms. The explicit formula for the Pitman nearness criterion of the Stein-rule (SR) estimator relative to the ordinary least squares (OLS) estimator is derived. It is shown numerically that the dominance of the SR estimator over the OLS estimator under the Pitman nearness criterion can be extended to the case of the multivariatet error distribution when the specification error is not severe. It is also shown that the dominance of the SR estimator over the OLS estimator cannot be extended to the case of the multivariatet error distribution when the specification error is severe. This research is partially supported by the Grants-in-Aid for 21st Century COE program.     

The average likelihood and a fiducial approximation: one parameter members of the generalized gamma distributions

The average likelihood, defined as the integral of the like-lihood function over the parameter space, has been used as a criterion for model selection The form of the average likelihood considered uses a uniform prior. An approximation is presented based on fiducial distributions. The sampling distributions of the average likelihood and its fiducial approximation are derived for cases of sampling from one parameter members of the general-ized gamma distributions.     

The Superiorities of Bayes Linear Minimum Risk Estimation in Linear Model

In this article, the Bayes linear minimum risk estimator (BLMRE) of parameters is derived in linear model. The superiorities of the BLMRE over ordinary least square estimator (LSE) is studied in terms of the mean square error matrix (MSEM) criterion and Pitman closeness (PC) criterion.     

On a criterion for evaluating an estimator

A criterion for evaluating an estimator of the mean μ of a population is studied. The criterion considered is that the estimator be within a units of μ a large percentage (say, (1-β) 100%) of the time. This is referred to as the α -β criterion for estimating μ. A variation of this criterion is also studied.     

On Bayes Linear Unbiased Estimator Under the Balanced Loss Function

In this paper, the Bayes linear unbiased estimator (Bayes LUE) is derived under the balanced loss function. Moreover, the superiority of Bayes LUE over ordinary least square estimator is studied under the mean square error matrix criterion and Pitman closeness criterion. Furthermore, we compare Bayes LUE under the balanced loss function with Bayes LUE under the quadratic loss function.     

D‐optimal minimax fractional factorial designs

The D‐optimal minimax criterion is proposed to construct fractional factorial designs. The resulting designs are very efficient, and robust against misspecification of the effects in the linear model. The criterion was first proposed by Wilmut & Zhou (2011); their work is limited to two‐level factorial designs, however. In this paper we extend this criterion to designs with factors having any levels (including mixed levels) and explore several important properties of this criterion. Theoretical results are obtained for construction of fractional factorial designs in general. This minimax criterion is not only scale invariant, but also invariant under level permutations. Moreover, it can be applied to any run size. This is an advantage over some other existing criteria. The Canadian Journal of Statistics 41: 325–340; 2013 © 2013 Statistical Society of Canada     

Regression model selection—a residual likelihood approach

Summary. We obtain the residual information criterion RIC, a selection criterion based on the residual log-likelihood, for regression models including classical regression models, Box–Cox transformation models, weighted regression models and regression models with autoregressive moving average errors. We show that RIC is a consistent criterion, and that simulation studies for each of the four models indicate that RIC provides better model order choices than the Akaike information criterion, corrected Akaike information criterion, final prediction error, C _p and R _adj², except when the sample size is small and the signal-to-noise ratio is weak. In this case, none of the criteria performs well. Monte Carlo results also show that RIC is superior to the consistent Bayesian information criterion BIC when the signal-to-noise ratio is not weak, and it is comparable with BIC when the signal-to-noise ratio is weak and the sample size is large.     

Comparison of estimators of the location parameter using pitman's closeness criterion

Necessary and sufficient conditions for a linear estimator to dominate another linear estimator of a location parameter under the Pitman's criterion of comparison are discussed. Consequently it is demonstrated that a linear biased estimator can not dominate a linear unbiased estimator under Pitman's criterion and that the sample mean is the Closest Linear Unbiased Estimator (CLUE). It is also shown that the ridge regression estimator with a known biasing constant can not dominate the ordinary least squares estimator. If an estimator δdominates an estimator δin the average loss sense then sufficient conditions are obtained under which δis also preferred over δunder Pitman's criterion. Further we obtain sufficient conditions under which preference under the Pitman's criterion will lead to preference under the mean squared error sense.     

The Clustering of Categorical Data: A Comparison of a Model-based and a Distance-based Approach

For clustering multivariate categorical data, a latent class model-based approach (LCC) with local independence is compared with a distance-based approach, namely partitioning around medoids (PAM). A comprehensive simulation study was evaluated by both a model-based as well as a distance-based criterion. LCC was better according to the model-based criterion and PAM was sometimes better according to the distance-based criterion. However, LCC had an overall good and sometimes better distance-based performance as PAM, although this was not the case in a real data set on tribal art items.     

A note on generalized ridge estimators

It is shown that a necessary and sufficient condition derived by Farebrother (1984)for a generalized ridge estimator to dominate the ordinary least-squares estimator with respect to the mean-square-error-matrix criterion in the linear regression model admits a similar interpretation as the well known criterion of Toro-Viz-carrondo and Wallace (1968)for the dominance of a restricted least-squares estimator over the ordinary least-squares estimator. Two other properties of the generalized ridge estimators, referring to the concept of admissibility, are also pointed out.