A simulation study and evaluation of multivariate forecast based control charts applied to ARMA processes

Much research had been performed in the area of control charting techniques for monitoring autocorrelated processes, especially regarding forecast based monitoring schemes. Forecast based monitoring schemes involve fitting an appropriate time-series model to the process, generating one step ahead forecast errors, and monitoring the forecast errors with traditional control charts. Another method introduced into the literature involves using multivariate control charts to monitor the ARMA derived one-step-ahead (OSA) and two-step-ahead (TSA) forecast errors. This article provides a broad simulation study and evaluation of the suggested multivariate approaches in regards to various ARMA(1,1) and AR(1) processes, and a comparison to their univariate counterparts.     

The use of Andrews curves for detecting the out-of-control variables when a multivariate control chart signals

The aim of this paper is to present a new method for solving the problem of detecting the out-of-control variables when a multivariate control chart signals. The main idea is based on Andrews curves. The proposed method is investigated thoroughly and is proved to have interesting results in comparison to a competing method.     

Adjusted-loss-function charts with variable sample sizes and sampling intervals

Recent research has shown that the control charts with adaptive features are quicker than the traditional static Shewhart charts in detecting process shifts. This article presents the design and implementation of a control chart based on Adjusted Loss Function (AL) with Variable Sample Sizes and Sampling Intervals (VSSI). This single chart (called the VSSI AL chart) is able to monitor the process shifts in mean and variance simultaneously. Our studies show that the VSSI AL chart is not only easier to design and implement than the VSSI X¯ & S (or X¯ & R) charts, but is also 10% more effective than the latter in detecting the process shifts from an overall viewpoint.     

Average run length comparison of multivariate control charts

In this paper we use Monte Carlo Simulation methodology to compare the effectiveness of five multivariate quality control methods, namely Hotelling T ², Multivariate Shewhart Char, Discriminant Analysis, Decomposition Method, and Multivariate Ridge Residual Chart-developed by Authors-, for controlling the mean vector in a multivariate process. P-dimensional multivariate normal data generated using different covariance structures. Various amount of shift in the mean vector is induced and the resulting Average Run Length (ARL) is computed. The effectiveness of each method with regard to ARL is discussed.     

Mixed multivariate EWMA-CUSUM control charts for an improved process monitoring

Multivariate exponential weighted moving average and cumulative sum charts are the most common memory type multivariate control charts. They make use of the present and past information to detect small shifts in the process parameter(s). In this article, we propose two new multivariate control charts using a mixed version of their design setups. The plotting statistics of the proposed charts are based on the cumulative sum of the multivariate exponentially weighted moving averages. The performances of these schemes are evaluated in terms of average run length. The proposals are compared with their existing counterparts, including HotellingT², MCUSUM, MEWMA, and MC1 charts. An application example is also presented for practical considerations using a real dataset.     

Identifying the time of a step change with multivariate single control charts

Change point estimation procedures simplify the efforts to search for and identify special causes in multivariate statistical process monitoring. After a signal is generated by the simultaneously used control charts or a single control chart, add-on change point procedure estimates the time of the change. In this study, multivariate joint change point estimation performance for simultaneous monitoring of both location and dispersion is compared under the assumption that various single charts are used to monitor the process. The change detection performance for several structural changes for the mean vector and covariance matrix is also discussed. It is concluded that choice of the control chart to obtain a signal may affect the change point detection performance.     

Phase-II monitoring and diagnosing of multivariate categorical processes using generalized linear test-based control charts

In this paper, two control charts based on the generalized linear test (GLT) and contingency table are proposed for Phase-II monitoring of multivariate categorical processes. The performances of the proposed methods are compared with the exponentially weighted moving average-generalized likelihood ratio test (EWMA-GLRT) control chart proposed in the literature. The results show the better performance of the proposed control charts under moderate and large shifts. Moreover, a new scheme is proposed to identify the parameter responsible for an out-of-control signal. The performance of the proposed diagnosing procedure is evaluated through some simulation experiments.     

CUSUM charts for monitoring the mean of a multivariate Gaussian process

In this paper control charts for the mean of a multivariate Gaussian process are considered. Using the generalized likelihood ratio approach and the sequential probability ratio test under an additional constraint on the magnitude of the change various types of CUSUM control charts are derived. It is analyzed under which conditions these schemes are directionally invariant. These charts are compared with several other control schemes proposed in literature. The performance of the charts is studied based on the maximum average delay.     

One-sided EWMA control charts for monitoring Poisson processes with varying sample sizes

ABSTRACT

Recently considerable research has been devoted to monitoring increases of incidence rate of adverse rare events. This paper extends some one-sided upper exponentially weighted moving average (EWMA) control charts from monitoring normal means to monitoring Poisson rate when sample sizes are varying over time. The approximated average run length bounds are derived for these EWMA-type charts and compared with the EWMA chart previously studied. Extensive simulations have been conducted to compare the performance of these EWMA-type charts. An illustrative example is given.     

Exponentially weighted moving average charts for correlated multivariate Poisson processes

In this article, we study exponentially weighted moving average (EWMA) control schemes to monitor the multivariate Poisson distribution with a general covariance structure, so that the practitioner can simultaneously monitor multiple correlated attribute processes more effectively. The statistical performance of the charts is assessed in terms of the run length properties and compared against other mainstream attribute control schemes. The application of the proposed methods to real-life and simulated datasets is demonstrated.     

The performance of multivariate CUSUM control charts with estimated parameters

In this paper, we study the effect of estimating the vector of means and the variance–covariance matrix on the performance of two of the most widely used multivariate cumulative sum (CUSUM) control charts, the MCUSUM chart proposed by Crosier [Multivariate generalizations of cumulative sum quality-control schemes, Technometrics 30 (1988), pp. 291–303] and the MC1 chart proposed by Pignatiello and Runger [Comparisons of multivariate CUSUM charts, J. Qual. Technol. 22 (1990), pp. 173–186]. Using simulation, we investigate and compare the in-control and out-of-control performances of the competing charts in terms of the average run length measure. The in-control and out-of-control performances of the competing charts deteriorate significantly if the estimated parameters are used with control limits intended for known parameters, especially when only a few Phase I samples are used to estimate the parameters. We recommend the use of the MC1 chart over that of the MCUSUM chart if the parameters are estimated from a small number of Phase I samples.     

A control chart for multivariate Poisson distribution using repetitive sampling

Control charts using repetitive group sampling have attracted a great deal of attention during the last few years. In the present article, we attempt to develop a control chart for the multivariate Poisson distribution using the repetitive group sampling scheme. In the proposed control chart, the monitoring statistic from the multivariate Poisson distribution has been used for the quick detection of the deteriorated process to avoid losses. The control coefficients have been estimated using the specified in-control average run lengths. The procedure of the proposed control chart has been explained by using the real-world example and a simulated data set. It has been observed that the proposed control chart is an efficient development for the quick detection of the nonrandom change in the manufacturing process.     

Optimization of design parameters for control charts with multiple assignable causes

Duncan's economic model of Shewhart's original x¯ chart has established its optimal and economic application for processes with the Markovian failure characteristic. As the sample statistics show some indications of process variations, the variable-sampling-interval (VSI) control charts perform more effectively than the fixed sampling interval (FSI) ones due to a higher frequency in the sampling rate. Regarding the economic design of control charts, most studies have been dedicated to the FSI scheme. In 1998, Bai & Lee considered the production process with a single assignable cause and proposed an economic VSI design for a general x¯ control chart. However, in real cases, there are multiple assignable causes in the production process. Therefore, concerning the operation characteristics of the real industry, this research develops an economic model for the VSI control chart with multiple assignable causes based on stochastic and statistics theory and determines the optimal design parameters of the chart. A numerical example is also provided to demonstrate the effectiveness of the proposed model and the result indicates that VSI performs more effectively than a FSI control chart.     

New control charts for simultaneous monitoring of the mean vector and covariance matrix of multivariate multiple linear profiles

Simultaneous monitoring of the mean vector and covariance matrix in multivariate processes allows practitioners to avoid the inflated false alarm rate that results from using two independent control charts. In this paper, we extend exponentially weighted moving average semicircle and generally weighted moving average semicircle control charts to monitor the mean vector and covariance matrix of multivariate multiple linear regression profiles in Phase II simultaneously. These new control charts are compared with the existing control charts in the literature in terms of the average run length criterion. Finally, a case is considered to show the application of the proposed charts.     

One-sided synthetic control charts for monitoring the multivariate coefficient of variation

Shewhart's type control charts for monitoring the Multivariate Coefficient of Variation (MCV) have recently been proposed in order to monitor the relative variability compared with the mean. These approaches are known to be rather slow in the detection of small or moderate process shifts. In this paper, in order to improve the detection efficiency, two one-sided Synthetic charts for the MCV are proposed. A Markov chain method is used to evaluate the statistical performance of the proposed charts. Furthermore, computational experiments reveal that the proposed control charts outperform the Shewhart MCV control chart in terms of the average run length to detect an out-of-control state. Finally, the implementation of the proposed chart is illustrated with an example using steel sleeves data.     

A weibull process failure mechanism for the economic design of mewma control charts

The design parameters of the multivariate exponentially weighted moving average (MEWMA) control chart may be chosen according to economic and/or statistical considerations. The economic model proposed for the design of the'MEWMA chart assumes a Markovian process failure mechanism following an exponential distribution. We'assess the sensitivity of the resulting economic design for the MEWMA to deviations from this assumption. In particular, the generalization, from an exponential to a Weibull distribution of process failure, is used to study the selection of MEWMA chart parameters given process cost and time information. We conclude that the quality of the resulting design (in terms of expected cost) is not substantially affected by mis-specification of the distribution of process failure.     

The economic design of multivariate binomial EWMA VSSI control charts

Since multi-attribute control charts have received little attention compared with multivariate variable control charts, this research is concerned with developing a new methodology to employ the multivariate exponentially weighted moving average (MEWMA) charts for m-attribute binomial processes; the attributes being the number of nonconforming items. Moreover, since the variable sample size and sampling interval (VSSI) MEWMA charts detect small process mean shifts faster than the traditional MEWMA, an economic design of the VSSI MEWMA chart is proposed to obtain the optimum design parameters of the chart. The sample size, the sampling interval, and the warning/action limit coefficients are obtained using a genetic algorithm such that the expected total cost per hour is minimized. At the end, a sensitivity analysis has been carried out to investigate the effects of the cost and the model parameters on the solution of the economic design of the VSSI MEWMA chart.     

Evaluation of control charts under linear trend

The performance of several control charting schemes is studied when the process mean changes as a linear trend. The control charts considered include the Shewhart chart, the Shewhart chart supplemented with runs rules, the cumulative sum (CUSUM) chart, the exponentially weighted moving average (EWMA) chart, and a generalized control chart.