CUSUM control schemes for monitoring the covariance matrix of multivariate time series

Modified cumulative sum (CUSUM) control charts and CUSUM schemes for residuals are suggested to detect changes in the covariance matrix of multivariate time series. Several properties of these schemes are derived when the in-control process is a stationary Gaussian process. A Monte Carlo study reveals that the proposed approaches show similar or even better performance than the schemes based on the multivariate exponentially weighted moving average (MEWMA) recursion. We illustrate how the control procedures can be applied to monitor the covariance structure of developed stock market indices.     

CUSUM charts for monitoring the mean of a multivariate Gaussian process

In this paper control charts for the mean of a multivariate Gaussian process are considered. Using the generalized likelihood ratio approach and the sequential probability ratio test under an additional constraint on the magnitude of the change various types of CUSUM control charts are derived. It is analyzed under which conditions these schemes are directionally invariant. These charts are compared with several other control schemes proposed in literature. The performance of the charts is studied based on the maximum average delay.     

EWNA charts for monitoring the mean and the autocovariances of stationary processes

In this paper various types of EWMA control charts are introduced for the simultaneous monitoring of the mean and the autocovariances. The target process is assumed to be a stationary process up to fourth-order or an ARMA process with heavy tailed innovations. The case of a Gaussian process is included in our results as well. The charts are compared within a simulation study. As a measure of the performance the average run length is taken. The target process is an ARMA (1,1) process with Student-t distributed innovations. The behavior of the charts is analyzed with respect to several out-of-control models. The best design parameters are determined for each chart. Our comparisons show that the multivariate EWMA chart applied to the residuals has the best overall performance.     

The influence of parameter estimation on the ARL of Shewhart type charts for time series

In this paper we discuss the behavior of the Shewhart residual chart and the modified Shewhart chart if the parameters of the underlying process are unknown and thus have to be estimated. We focus on the estimation of the variance. For AR models we also consider the estimation of the AR coefficients. The average run length (ARL) of the control chart with estimated parameters is compared with the ARL of the scheme for known parameters and with the ARL for independent variables. Additionally, we give recommendations on the choice of the estimators in the context of Shewhart control schemes.     

New cumulative sum control charts for monitoring process variability

In this article, we propose new cumulative sum (CUSUM) control charts using the ordered ranked set sampling (RSS) and ordered double RSS schemes, with the perfect and imperfect rankings, for monitoring the variability of a normally distributed process. The run length characteristics of the proposed CUSUM charts are computed using the Monte Carlo simulations. The proposed CUSUM charts are compared in terms of the average and standard deviation of run lengths with their existing competitor CUSUM charts based on simple random sampling. It turns out that the proposed CUSUM charts with the perfect and imperfect rankings are more sensitive than the existing CUSUM charts based on the sample range and standard deviation. A similar trend is present when these CUSUM charts are compared with the fast initial response features. An example is also used to demonstrate the implementation and working of the proposed CUSUM charts.     

Application of the Generalized Likelihood Ratio Test for Detecting Changes in the Mean of Multivariate GARCH Processes

We derive several multivariate control charts to monitor the mean vector of multi-variate GARCH processes under the presence of changes, by means of maximizing the generalized likelihood ratio. This presentation is rounded up by a comparative performance study based on extensive Monte Carlo simulations. An empirical illustration shows how the obtained results can be applied to real data.     

One-sided EWMA control charts for monitoring Poisson processes with varying sample sizes

ABSTRACT

Recently considerable research has been devoted to monitoring increases of incidence rate of adverse rare events. This paper extends some one-sided upper exponentially weighted moving average (EWMA) control charts from monitoring normal means to monitoring Poisson rate when sample sizes are varying over time. The approximated average run length bounds are derived for these EWMA-type charts and compared with the EWMA chart previously studied. Extensive simulations have been conducted to compare the performance of these EWMA-type charts. An illustrative example is given.     

On the improvement of one-sided S control charts

The most common charting procedure used for monitoring the variance of the distribution of a quality characteristic is the S control chart. As a Shewhart-type control chart, it is relatively insensitive in the quick detection of small and moderate shifts in process variance. The performance of the S chart can be improved by supplementing it with runs rules or by varying the sample size and the sampling interval. In this work, we introduce and study one-sided adaptive S control charts, supplemented or not with one powerful runs rule, for detecting increases or decreases in process variation. The properties of the proposed control schemes are obtained by using a Markov chain approach. Furthermore, a practical guidance for the choice of the most suitable control scheme is also provided.     

The optimal choice of negative binomial charts for monitoring high-quality processes

Good control charts for high quality processes are often based on the number of successes between failures. Geometric charts are simplest in this respect, but slow in recognizing moderately increased failure rates p. Improvement can be achieved by waiting until r>1 failures have occurred, i.e. by using negative binomial charts. In this paper we analyze such charts in some detail. On the basis of a fair comparison, we demonstrate how the optimal r is related to the degree of increase of p. As in practice p will usually be unknown, we also analyze the estimated version of the charts. In particular, simple corrections are derived to control the nonnegligible effects of this estimation step.     

A rational sequential probability ratio test control chart for monitoring process shifts in mean and variance

The sequential probability ratio test (SPRT) chart is a very effective tool for monitoring manufacturing processes. This paper proposes a rational SPRT chart to monitor both process mean and variance. This SPRT chart determines the sampling interval d based on the rational subgroup concept according to the process conditions and administrative considerations. Since the rational subgrouping is widely adopted in the design and implementation of control charts, the studies of the rational SPRT have a practical significance. The rational SPRT chart is designed optimally in order to minimize the index average extra quadratic loss for the best overall performance. A systematic performance study has also been conducted. From an overall viewpoint, the rational SPRT chart is more effective than the cumulative sum chart by more than 63%. Furthermore, this article provides a design table, which contains the optimal values of the parameters of the rational SPRT charts for different specifications. This will greatly facilitate the potential users to select an appropriate SPRT chart for their applications. The users can also justify the application of the rational SPRT chart according to the achievable enhancement in detection effectiveness.     

Phase-II monitoring and diagnosing of multivariate categorical processes using generalized linear test-based control charts

In this paper, two control charts based on the generalized linear test (GLT) and contingency table are proposed for Phase-II monitoring of multivariate categorical processes. The performances of the proposed methods are compared with the exponentially weighted moving average-generalized likelihood ratio test (EWMA-GLRT) control chart proposed in the literature. The results show the better performance of the proposed control charts under moderate and large shifts. Moreover, a new scheme is proposed to identify the parameter responsible for an out-of-control signal. The performance of the proposed diagnosing procedure is evaluated through some simulation experiments.     

The use of Andrews curves for detecting the out-of-control variables when a multivariate control chart signals

The aim of this paper is to present a new method for solving the problem of detecting the out-of-control variables when a multivariate control chart signals. The main idea is based on Andrews curves. The proposed method is investigated thoroughly and is proved to have interesting results in comparison to a competing method.     

Optimization of design parameters for control charts with multiple assignable causes

Duncan's economic model of Shewhart's original x¯ chart has established its optimal and economic application for processes with the Markovian failure characteristic. As the sample statistics show some indications of process variations, the variable-sampling-interval (VSI) control charts perform more effectively than the fixed sampling interval (FSI) ones due to a higher frequency in the sampling rate. Regarding the economic design of control charts, most studies have been dedicated to the FSI scheme. In 1998, Bai & Lee considered the production process with a single assignable cause and proposed an economic VSI design for a general x¯ control chart. However, in real cases, there are multiple assignable causes in the production process. Therefore, concerning the operation characteristics of the real industry, this research develops an economic model for the VSI control chart with multiple assignable causes based on stochastic and statistics theory and determines the optimal design parameters of the chart. A numerical example is also provided to demonstrate the effectiveness of the proposed model and the result indicates that VSI performs more effectively than a FSI control chart.     

Statistical control charts for monitoring the mean of a stationary process

Recently statistical process control (SPC) methodologies have been developed to accommodate autocorrelated data. A primary method to deal with autocorrelated data is the use of residual charts. Although this methodology has the advantage that it can be applied to any autocorrelated data it needs time series modeling efforts. In addition for a X residual chart the detection capability is sometimes small compared to the X chart and EWMA chart. Zhang (1998) proposed the EWMAST chart which is constructed by charting the EWMA statistic for stationary processes to monitor the process mean. The performance of the EWMAST chart the X chart the X residual chart and other charts were compared in Zhang (1998). In this paper comparisons are made among the EWMAST chart the CUSUM residual chart and EWMA residual chart as well as the X residual chart and X chart via the average run length.     

Identifying the time of a step change with multivariate single control charts

Change point estimation procedures simplify the efforts to search for and identify special causes in multivariate statistical process monitoring. After a signal is generated by the simultaneously used control charts or a single control chart, add-on change point procedure estimates the time of the change. In this study, multivariate joint change point estimation performance for simultaneous monitoring of both location and dispersion is compared under the assumption that various single charts are used to monitor the process. The change detection performance for several structural changes for the mean vector and covariance matrix is also discussed. It is concluded that choice of the control chart to obtain a signal may affect the change point detection performance.     

Surveillance of the covariance matrix of multivariate nonlinear time series

In this paper, sequential procedures for the surveillance of the covariance matrices of multivariate nonlinear time series are introduced. Two different types of control charts are proposed. The first type is based on the exponential smoothing of each component of a local measure for the covariances. The control statistic is equal to the Mahalanobis distance of this quantity with its in-control mean. In our second approach, the Mahalanobis distance is first determined and after that it is exponentially smoothed. We discuss three examples of local measures.

Several properties of the proposed schemes are discussed assuming the target process to be generated by a multivariate GARCH(1, 1) model. The generalization to the family of spherical distributions allows the modelling of frequently observed fat tails in financial data. Some results of an extensive Monte Carlo simulation study are provided in order to judge the performance of the presented control schemes. As a performance measure we use the average run length. An empirical example illustrates the importance of the fast detection of the changes in the covariance structure of the returns of financial assets.     

On some aspects of a generalized alternative zero-inflated logarithmic series distribution

Here, we consider a generalized form of the alternative zero-inflated logarithmic series distribution of Kumar and Riyaz (J. Statist. Comp. Simul., 2015) and study some of its important aspects. The parameters of the distribution are estimated by the method of maximum likelihood and some test procedures are developed for testing the significance of the additional parameter of the model. All these estimation and testing procedures are illustrated with the help of certain real life datasets. A simulation study is also carried out for assessing the performance of the estimators.     

Estimating the parameters of a BINMA Poisson model for a non-stationary bivariate time series

This article proposes a novel non-stationary BINMA time series model by extending two INMA processes where their innovation series follow the bivariate Poisson under time-varying moment assumptions. This article also demonstrates, through simulation studies, the use and superiority of the generalized quasi-likelihood (GQL) approach to estimate the regression effects, which is computationally less complicated as compared to conditional maximum likelihood estimation (CMLE) and the feasible generalized least squares (FGLS). The serial and bivariate dependence correlations are estimated by a robust method of moments.     

ARL-unbiased control charts for the monitoring of exponentially distributed characteristics based on type-II censored samples

In this paper, the problem of monitoring process data that can be modelled by exponential distribution is considered when observations are from type-II censoring. Such data are common in many practical inspection environment. An average run length unbiased (ARL-unbiased) control scheme is developed when the in-control scale parameter is known. The performance of the proposed control charts are investigated in terms of the ARL and standard deviation of the run length. The effects of parameter estimation on the proposed control charts are also evaluated. Then, we consider the design of the ARL-unbiased control charts when the in-control scale parameter is estimated. Finally, an example is used to illustrate the implementation of the proposed control charts.     

A synthetic control chart for monitoring the small shifts in a process mean based on an attribute inspection

Abstract

In this paper, a synthetic control chart is proposed by integrating the salient features of the np_x chart and the CRL chart. The synthetic chart achieves higher detection effectiveness on both small and large mean shifts while retaining the operational simplicity of the attribute charts owing to only using attribute inspection. Both statistical and economic design of the synthetic chart are considered and numerical tests have indicated that the synthetic chart has a higher power for detecting mean shifts than the np_x chart, MON chart and CUSUM chart. In addition, sensitivity analyses are also performed under both the statistical and economic design model.