Optimal block designs for triallel cross experiments

Optimal block designs for a certain type of triallel cross experiments are investigated. Nested balanced block designs are introduced and it is shown how these designs give rise to optimal designs for triallel crosses. Several .series of nested balanced block designs, leading to optimal designs for triallel crosses are reported.     

Nonproper variance balanced designs and optimality

This communication deals with the construction and optimality of non-proper (unequal block sized) variance balanced (VB) designs obtainable under linear homoscedastic normal model. Several methods of construction of non-proper VB designs have been given. Some constructed designs are universally optimal non-proper variance balanced designs.     

D-minimax Second-order Designs Over Hypercubes for Extrapolation and Restricted Interpolation Regions

The D-minimax criterion for estimating slopes of a response surface involving k factors is considered for situations where the experimental region χ and the region of interest ? are co-centered cubes but not necessarily identical. Taking χ = [ ? 1, 1]^k and ? = [ ? R, R]^k, optimal designs under the criterion for the full second-order model are derived for various values of R and their relative performances investigated. The asymptotically optimal design as R → ∞ is also derived and investigated. In addition, the optimal designs within the class of product designs are obtained. In the asymptotic case it is found that the optimal product design is given by a solution of a cubic equation that reduces to a quadratic equation for k = 3?and?6. Relative performances of various designs obtained are examined. In particular, the optimal asymptotic product design and the traditional D-optimal design are compared and it is found that the former performs very well.     

Bayes a-opttmal and efficient block designs for comparing test treatments with a standard treatment

A sufficient condition for the Bayes A-optimality of block designs when comparing a standard treatment with v test treatments is given by Majumdar. (In:Optimal Design and Analysis of Experiments, Y. Dodge, V. V. Fedorov and H. P. Wynn (Eds.), 15-27, North-Holland, 1988). The priors that he considers depend on a constant α ε [0, ∞), with α - 0 corresponding to no prior information at all. The given sufficient condition, consequently, also depends on a. Large families of optimal and highly efficient designs are only known for the case α - 0. We will show how some of the results for α - 0 can be extended to obtain large families of optimal and highly efficient designs for arbitrary values of α. In addition, these results are useful when considering design robustness against an improper choice of α.     

A class of saturated row–column designs

A new class of row–column designs is proposed. These designs are saturated in terms of eliminating two-way heterogeneity with an additive model. The (m,s)-criterion is used to select optimal designs. It turns out that all (m,s)-optimal designs are binary. Square (m,s)-optimal designs are constructed and they are treatment-connected. Thus, all treatment contrasts are estimable regardless of the row and column effects.     

Locally and maximin optimal designs for multi-factor nonlinear models

This paper considers the search for locally and maximin optimal designs for multi-factor nonlinear models from optimal designs for sub-models of a lower dimension. In particular, sufficient conditions are given so that maximin D-optimal designs for additive multi-factor nonlinear models can be built from maximin D-optimal designs for their sub-models with a single factor. Some examples of application are models involving exponential decay in several variables.     

Optimal partially balanced nested row-column designs

A partially balanced nested row-column design, referred to as PBNRC, is defined as an arrangement of v treatments in b p × q blocks for which, with the convention that p q, the information matrix for the estimation of treatment parameters is equal to that of the column component design which is itself a partially balanced incomplete block design. In this paper, previously known optimal incomplete block designs, and row-column and nested row-column designs are utilized to develop some methods of constructing optimal PBNRC designs. In particular, it is shown that an optimal group divisible PBNRC design for v = mn kn treatments in p × q blocks can be constructed whenever a balanced incomplete block design for m treatments in blocks of size k each and a group divisible PBNRC design for kn treatments in p × q blocks exist. A simple sufficient condition is given under which a group divisible PBNRC is Ψ_f-better for all f> 0 than the corresponding balanced nested row-column designs having binary blocks. It is also shown that the construction techniques developed particularly for group divisible designs can be generalized to obtain PBNRC designs based on rectangular association schemes.     

Optimal repeated measurements designs for comparing test treatments with a control

A-optimal and mv optimal repeated measurments designs for comparing serveral test treatments with a control are considered. the models considered are basically of two types: without preperides and the cirular model. It is shown known that some known strongly balanced uniform repeated measurements designs can be modified to obtain optimal designs for this problem. Some other methods of finding optimal designs are also given.     

Robustness properties of minimally‐supported Bayesian D‐optimal designs for heteroscedastic models

Bayesian D‐optimal designs supported on a fixed number of points were found by Dette & Wong (1998) for estimating parameters in a polynomial model when the error variance depends exponentially on the explanatory variable. The present authors provide optimal designs under a broader class of error variance structures and investigate the robustness properties of these designs to model and prior distribution assumptions. A comparison of the performance of the optimal designs relative to the popular uniform designs is also given. The authors' results suggest that Bayesian D‐optimal designs suported on a fixed number of points are more likely to be globaly optimal among all designs if the prior distribution is symmetric and is concentrated around its mean.     

Approximate theory of multiway block designs

Optimality properties of multiway block designs are deduced from the general results of J. Kiefer's approximate-design theory. In the model with additive effects these optimality properties solely depend on the two-dimensional marginals of the designs. Uniform designs, and designs whose two-dimensional marginals are products of the one-dimensional marginals, are shown to be optimal. Approximate Youden designs are introduced for the case when the support sets of the two-dimensional marginals are prescribed in advance. They are optimal in a relatively small class of competing designs only.     

Optimal and efficient crossover designs for comparing test treatments to a control treatment under various models

We study the optimality, efficiency, and robustness of crossover designs for comparing several test treatments to a control treatment. Since A-optimality is a natural criterion in this context, we establish lower bounds for the trace of the inverse of the information matrix for the test treatments versus control comparisons under various models. These bounds are then used to obtain lower bounds for efficiencies of a design under these models. Two algorithms, both guided by these efficiencies and results from optimal design theory, are proposed for obtaining efficient designs under the various models.     

PARTIALLY EQUINEIGHBOURED DESIGNS

This paper presents further results on a class of designs called equineighboured designs, ED. These designs are intended for field and related experiments, especially whenever there is evidence that observations in the same block are correlated. An ED has the property that every unordered pair of treatments occurs as nearest neighbours equally frequently at each level. Ipinyomi (1986) has defined and shown that ED are balanced designs when neighbouring observations are correlated. He has also presented ED as a continuation of the development of optimal block designs. An ED would often require many times the number of experimental materials needed for the construction of an ordinary balanced incomplete block, BIB, design for the same number of treatments and block sizes. Thus for a relatively large number of treatments and block sizes the required minimum number of blocks may be excessively large for practical use of ED. In this paper we shall define and examine partially equineighboured designs with n concurrences, PED (n), as alternatives where ED are practically unachievable. Particular attention will be given to designs with smaller numbers of blocks and for which only as little balance as possible may be lost.     

PARAMETER ESTIMATION FOR THE FIXED BLOCK EFFECTS MODEL USING A USUAL DESIGN

ABSTRACT

This paper is devoted to the fixed block effects model analysed with most of the classical designs. First, we find regularities conditions for such designs. Then, we obtain explicitly all the least squares estimators of the model. A particular attention is given to orthogonal blocked designs and their optimal properties.     

An algorithm for constructing optimal resolvable incomplete block designs

This paper describes an efficient algorithm for the construction of optimal or near-optimal resolvable incomplete block designs (IBDs) for any number of treatments v < 100. The performance of this algorithm is evaluated against known lattice designs and the 414 or-designs of Patterson & Williams [36]. For the designs under study, it appears that our algorithm is about equally effective as the simulated annealing algorithm of Venables & Eccleston [42]. An example of the use of our algorithm to construct the row (or column) components of resolvable row-column designs is given.     

Optimal designs for non-competitive enzyme inhibition kinetic models

In this paper, we present a new method for determining optimal designs for enzyme inhibition kinetic models, which are used to model the influence of the concentration of a substrate and an inhibition on the velocity of a reaction. The approach uses a nonlinear transformation of the vector of predictors such that the model in the new coordinates is given by an incomplete response surface model. Although there exist no explicit solutions of the optimal design problem for incomplete response surface models so far, the corresponding design problem in the new coordinates is substantially more transparent, such that explicit or numerical solutions can be determined more easily. The designs for the original problem can finally be found by an inverse transformation of the optimal designs determined for the response surface model. We illustrate the method determining explicit solutions for the D-optimal design and for the optimal design problem for estimating the individual coefficients in a non-competitive enzyme inhibition kinetic model.     

Universally Optimal Designs Balanced for Neighbor Effects

The performance of a treatment is affected by the treatments applied to its adjacent plots, especially in the experiments of agriculture, horticulture, forestry, serology and industry. Neighbor designs ensure that treatment comparisons are least affected by neighbor effects, therefore, this is a rich field of investigation. In this paper, criterion for construction of universally optimal neighbor balanced designs is discussed.     

E-optimal designs for regression models with quantitative factors— a reasonable choice?

For regression models with quantitative factors it is illustrated that the E-optimal design can be extremely inefficient in the sense that it degenerates to a design which takes all observations at only one point. This phenomenon is caused by the different size of the elements in the covariance matrix of the least-squares estimator for the unknown parameters. For these reasons we propose to replace the E-criterion by a corresponding standardized version. The advantage of this approach is demonstrated for the polynomial regression on a nonnegative interval, where the classical and standardized E-optimal designs can be found explicitly. The described phenomena are not restricted to the E-criterion but appear for nearly all optimality criteria proposed in the literature. Therefore standardization is recommended for optimal experimental design in regression models with quantitative factors. The optimal designs with respect to the new standardized criteria satisfy a similar invariance property as the famous D-optimal designs, which allows an easy calculation of standardized optimal designs on many linearly transformed design spaces.     

Three-stage designs for monitoring clinical trials

Optimal three-stage designs with equal sample sizes at each stage are presented and compared to fixed sample designs, fully sequential designs, designs restricted to use the fixed sample critical value at the final stage, and to modifications of other group sequential designs previously proposed in the literature. Typically, the greatest savings realized with interim analyses are obtained by the first interim look. More than 50% of the savings possible with a fully sequential design can be realized with a simple two-stage design. Three-stage designs can realize as much as 75% of the possible savings. Without much loss in efficiency, the designs can be modified so that the critical value at the final stage equals the usual fixed sample value while maintaining the overall level of significance, alleviating some potential confusion should a final stage be necessary. Some common group sequential designs, modified to allow early acceptance of the null hypothesis, are shown to be nearly optimal in some settings while performing poorly in others. An example is given to illustrate the use of several three-stage plans in the design of clinical trials.     

Screening designs for model discrimination

We introduce new criteria for model discrimination and use these and existing criteria to evaluate standard orthogonal designs. We show that the capability of orthogonal designs for model discrimination is surprisingly varied. In fact, for specified sample sizes, number of factors, and model spaces, many orthogonal designs are not model discriminating by the definition given in this paper, while others in the same class of orthogonal designs are. We also use these criteria to construct optimal two-level model-discriminating designs for screening experiments. The efficacy of these designs is studied, both in terms of estimation efficiency and discrimination success. Simulation studies indicate that the constructed designs result in substantively higher likelihoods of identifying the correct model.     

On the Choice of a Prior for Bayesian D-Optimal Designs for the Logistic Regression Model with a Single Predictor

The Bayesian design approach accounts for uncertainty of the parameter values on which optimal design depends, but Bayesian designs themselves depend on the choice of a prior distribution for the parameter values. This article investigates Bayesian D-optimal designs for two-parameter logistic models, using numerical search. We show three things: (1) a prior with large variance leads to a design that remains highly efficient under other priors, (2) uniform and normal priors lead to equally efficient designs, and (3) designs with four or five equidistant equally weighted design points are highly efficient relative to the Bayesian D-optimal designs.