The Poisson Birnbaum–Saunders model with long-term survivors

In this paper, we propose a cure rate survival model by assuming that the number of competing causes of the event of interest follows the Poisson distribution and the time to event has the Birnbaum–Saunders (BS) distribution. We define the Poisson BS distribution and provide two useful representations for its density function which facilitate to obtain some mathematical properties. Two closed-form expressions for the moments of the new distribution are given. We estimate the parameters of the model with cure rate using maximum likelihood. For different parameter settings, sample sizes and censoring percentages, several simulations are performed. We derive the appropriate matrices for assessing local influence on the parameter estimates under different perturbation schemes and present some ways to perform a global influence study. We analyse a real data set from the medical area.     

An extended fatigue life distribution

A five-parameter extended fatigue life model called the McDonald–Birnbaum–Saunders (McBS) distribution is proposed. It extends the Birnbaum–Saunders and beta Birnbaum–Saunders [G.M. Cordeiro and A.J. Lemonte, The β-Birnbaum–Saunders distribution: An improved distribution for fatigue life modeling. Comput. Statist. Data Anal. 55 (2011), pp. 1445–1461] distributions and also the new Kumaraswamy–Birnbaum–Saunders distribution. We obtain the ordinary moments, generating function, mean deviations and quantile function. The method of maximum likelihood is used to estimate the model parameters and its potentiality is illustrated with an application to a real fatigue data set. Further, we propose a new extended regression model based on the logarithm of the McBS distribution. This model can be very useful to the analysis of real data and could give more realistic fits than other special regression models.     

Bivariate log Birnbaum–Saunders distribution

Univariate Birnbaum–Saunders distribution has received a considerable amount of attention in recent years. Rieck and Nedelman (A log-linear model for the Birnbaum–Saunders distribution. Technometrics, 1991;33:51–60) introduced a log Birnbaum–Saunders distribution. The main aim of this paper is to introduce bivariate log Birnbaum–Saunders distribution. The proposed model is symmetric and it has five parameters. It can be obtained using Gaussian copula. Different properties can be obtained using copula structure. It is observed that the maximum likelihood estimators (MLEs) cannot be obtained explicitly. Two-dimensional profile likelihood approach may be adopted to compute the MLEs. We propose some alternative estimators also, which can be obtained quite conveniently. The analysis of one data set is performed for illustrative purposes. Finally, it is observed that this model can be used as a bivariate log-linear model, and its multivariate generalization is also quite straight forward.     

Multivariate Birnbaum–Saunders distribution: properties and associated inference

The univariate fatigue life distribution proposed by Birnbaum and Saunders [A new family of life distributions. J Appl Probab. 1969;6:319–327] has been used quite effectively to model times to failure for materials subject to fatigue and for modelling lifetime data and reliability problems. In this article, we introduce a Birnbaum–Saunders (BS) distribution in the multivariate setting. The new multivariate model arises in the context of conditionally specified distributions. The proposed multivariate model is an absolutely continuous distribution whose marginals are univariate BS distributions. General properties of the multivariate BS distribution are derived and the estimation of the unknown parameters by maximum likelihood is discussed. Further, the Fisher's information matrix is determined. Applications to real data of the proposed multivariate distribution are provided for illustrative purposes.     

Estimation for Birnbaum–Saunders Distribution in Simple Step Stress–accelerated Life Test with Type-II Censoring

This paper develops the Bayesian estimation for the Birnbaum–Saunders distribution based on Type-II censoring in the simple step stress–accelerated life test with power law accelerated form. Maximum likelihood estimates are obtained and Gibbs sampling procedure is used to get the Bayesian estimates for shape parameter of Birnbaum–Saunders distribution and parameters of power law–accelerated model. Asymptotic normality method and Markov Chain Monte Carlo method are employed to construct the corresponding confidence interval and highest posterior density interval at different confidence level, respectively. At last, the results are compared by using Monte Carlo simulations, and a numerical example is analyzed for illustration.     

Bayesian inference for Birnbaum–Saunders distribution and its generalization

We present a Bayesian approach for parameter inference of the Birnbaum–Saunders distribution [Birnbaum ZW, Saunders SC. A new family of life distributions. J Appl Probab. 1969;6:319–327], as well as the generalized Birnbaum–Saunders distribution developed by Owen [A new three-parameter extension to the Birnbaum–Saunders distribution. IEEE Trans Reliab. 2006;55:475–479], in the presence of random right-censored data. To handle the instance of commonly occurred censored observations, we utilize the data augmentation technique [Tanner MA, Wong WH. The calculation of posterior distributions by data augmentation. J Amer Statist Assoc. 1987;82(398):528–540] to circumvent the arduous expressions involving the censored data in posterior inferences. Simulation studies are carried out to assess performance of these methods under different parameter values, with small and large sample sizes, as well as various degrees of censoring. Two real data are analysed for illustrative purpose.     

Random number generators for the generalized Birnbaum–Saunders distribution

The generalized Birnbaum–Saunders distribution pertains to a class of lifetime models including both lighter and heavier tailed distributions. This model adapts well to lifetime data, even when outliers exist, and has other good theoretical properties and application perspectives. However, statistical inference tools may not exist in closed form for this model. Hence, simulation and numerical studies are needed, which require a random number generator. Three different ways to generate observations from this model are considered here. These generators are compared by utilizing a goodness-of-fit procedure as well as their effectiveness in predicting the true parameter values by using Monte Carlo simulations. This goodness-of-fit procedure may also be used as an estimation method. The quality of this estimation method is studied here. Finally, through a real data set, the generalized and classical Birnbaum–Saunders models are compared by using this estimation method.     

A robust multivariate Birnbaum–Saunders distribution: EM estimation

We propose here a robust multivariate extension of the bivariate Birnbaum–Saunders (BS) distribution derived by Kundu et al. [Bivariate Birnbaum–Saunders distribution and associated inference. J Multivariate Anal. 2010;101:113–125], based on scale mixtures of normal (SMN) distributions that are used for modelling symmetric data. This resulting multivariate BS-type distribution is an absolutely continuous distribution whose marginal and conditional distributions are of BS-type distribution of Balakrishnan et al. [Estimation in the Birnbaum–Saunders distribution based on scalemixture of normals and the EM algorithm. Stat Oper Res Trans. 2009;33:171–192]. Due to the complexity of the likelihood function, parameter estimation by direct maximization is very difficult to achieve. For this reason, we exploit the nice hierarchical representation of the proposed distribution to propose a fast and accurate EM algorithm for computing the maximum likelihood (ML) estimates of the model parameters. We then evaluate the finite-sample performance of the developed EM algorithm and the asymptotic properties of the ML estimates through empirical experiments. Finally, we illustrate the obtained results with a real data and display the robustness feature of the estimation procedure developed here.     

The Generalized Birnbaum–Saunders Distribution and Its Theory,Methodology, and Application

In this paper, we discuss the class of generalized Birnbaum–Saunders distributions, which is a very flexible family suitable for modeling lifetime data as it allows for different degrees of kurtosis and asymmetry and unimodality as well as bimodality. We describe the theoretical developments on this model including properties, transformations and related distributions, lifetime analysis, and shape analysis. We also discuss methods of inference based on uncensored and censored data, diagnostics methods, goodness-of-fit tests, and random number generation algorithms for the generalized Birnbaum–Saunders model. Finally, we present some illustrative examples and show that this distribution fits the data better than the classical Birnbaum–Saunders model.     

A Comparison of Two Random Number Generators for the Birnbaum–Saunders Distribution

Abstract

The Birnbaum–Saunders distribution was developed to describe fatigue failure lifetimes, however, the distribution has been shown to be applicable for a variety of situations that frequently occur in the engineering sciences. In general, the distribution can be used for situations that involve stochastic wear–out failure. The distribution does not have an exponential family structure, and it is often necessary to use simulation methods to study the properties of statistical inference procedures for this distribution. Two random number generators for the Birnbaum–Saunders distribution have appeared in the literature. The purpose of this article is to present and compare these two random number generators to determine which is more efficient. It is shown that one of these generators is a special case of the other and is simpler and more efficient to use.     

Inference for the common mean of several Birnbaum–Saunders populations

The Birnbaum–Saunders distribution is a widely used distribution in reliability applications to model failure times. For several samples from possible different Birnbaum–Saunders distributions, if their means can be considered as the same, it is of importance to make inference for the common mean. This paper presents procedures for interval estimation and hypothesis testing for the common mean of several Birnbaum–Saunders populations. The proposed approaches are hybrids between the generalized inference method and the large sample theory. Some simulation results are conducted to present the performance of the proposed approaches. The simulation results indicate that our proposed approaches perform well. Finally, the proposed approaches are applied to analyze a real example on the fatigue life of 6061-T6 aluminum coupons for illustration.     

Influence analysis in skew-Birnbaum–Saunders regression models and applications

In this paper, we propose a method to assess influence in skew-Birnbaum–Saunders regression models, which are an extension based on the skew-normal distribution of the usual Birnbaum–Saunders (BS) regression model. An interesting characteristic that the new regression model has is the capacity of predicting extreme percentiles, which is not possible with the BS model. In addition, since the observed likelihood function associated with the new regression model is more complex than that from the usual model, we facilitate the parameter estimation using a type-EM algorithm. Moreover, we employ influence diagnostic tools that considers this algorithm. Finally, a numerical illustration includes a brief simulation study and an analysis of real data in order to show the proposed methodology.     

Multivariate normal mean–variance mixture distribution based on Birnbaum–Saunders distribution

A multivariate normal mean–variance mixture based on a Birnbaum–Saunders (NMVMBS) distribution is introduced and several properties of this new distribution are discussed. A new robust non-Gaussian ARCH-type model is proposed in which there exists a relation between the variance of the observations, and the marginal distributions are NMVMBS. A simple EM-based maximum likelihood estimation procedure to estimate the parameters of this normal mean–variance mixture distribution is given. A simulation study and some real data are used to demonstrate the modelling strength of this new model.     

The generalized T Birnbaum–Saunders family

In this work, we generalize the Birnbaum–Saunders distribution using the generalized t distribution alternatively to the normal distribution. The newly defined family is positively skewed and contains distributions with different kurtosis and skewness. We study its properties and special cases and demonstrate its use on some real data sets considering the maximum-likelihood estimation procedure.     

The sinh-normal/independent nonlinear regression model

The normal/independent family of distributions is an attractive class of symmetric heavy-tailed density functions. They have a nice hierarchical representation to make inferences easily. We propose the Sinh-normal/independent distribution which extends the Sinh-normal (SN) distribution [23]. We discuss some of its properties and propose the Sinh-normal/independent nonlinear regression model based on a similar setup of Lemonte and Cordeiro [18], who applied the Birnbaum–Saunders distribution. We develop an EM-algorithm for maximum likelihood estimation of the model parameters. In order to examine the robustness of this flexible class against outlying observations, we perform a simulation study and analyze a real data set to illustrate the usefulness of the new model.     

Estimation of parameters for a Birnbaum–Saunders regression model with censored data

Little work has been published on the analysis of censored data for the Birnbaum–Saunders distribution (BISA). In this article, we implement the EM algorithm to fit a regression model with censored data when the failure times follow the BISA. Three approaches to implement the E-Step of the EM algorithm are considered. In two of these implementations, the M-Step is attained by an iterative least-squares procedure. The algorithm is exemplified with a single explanatory variable in the model.     

Small-Sample Corrections for Score Tests in Birnbaum–Saunders Regressions

In this article, we deal with the issue of performing accurate small-sample inference in the Birnbaum–Saunders regression model, which can be useful for modeling lifetime or reliability data. We derive a Bartlett-type correction for the score test and numerically compare the corrected test with the usual score test and some other competitors.     

The beta log-normal distribution

For the first time, we introduce the beta log-normal (LN) distribution for which the LN distribution is a special case. Various properties of the new distribution are discussed. Expansions for the cumulative distribution and density functions that do not involve complicated functions are derived. We obtain expressions for its moments and for the moments of order statistics. The estimation of parameters is approached by the method of maximum likelihood, and the expected information matrix is derived. The new model is quite flexible in analysing positive data as an important alternative to the gamma, Weibull, generalized exponential, beta exponential, and Birnbaum–Saunders distributions. The flexibility of the new distribution is illustrated in an application to a real data set.     

Bimodal Birnbaum–Saunders distribution with applications to non negative measurements

In this article, we introduce a new extension of the Birnbaum–Saunders (BS) distribution as a follow-up to the family of skew-flexible-normal distributions. This extension produces a family of BS distributions including densities that can be unimodal as well as bimodal. This flexibility is important in dealing with positive bimodal data, given the difficulties experienced by the use of mixtures of distributions. Some basic properties of the new distribution are studied including moments. Parameter estimation is approached by the method of moments and also by maximum likelihood, including a derivation of the Fisher information matrix. Three real data illustrations indicate satisfactory performance of the proposed model.     

Reliability modeling of systems with two dependent degrading components based on gamma processes

Abstract

Many engineering systems have multiple components with more than one degradation measure which is dependent on each other due to their complex failure mechanisms, which results in some insurmountable difficulties for reliability work in engineering. To overcome these difficulties, the system reliability prediction approaches based on performance degradation theory develop rapidly in recent years, and show their superiority over the traditional approaches in many applications. This paper proposes reliability models of systems with two dependent degrading components. It is assumed that the degradation paths of the components are governed by gamma processes. For a parallel system, its failure probability function can be approximated by the bivariate Birnbaum–Saunders distribution. According to the relationship of parallel and series systems, it is easy to find that the failure probability function of a series system can be expressed by the bivariate Birnbaum–Saunders distribution and its marginal distributions. The model in such a situation is very complicated and analytically intractable, and becomes cumbersome from a computational viewpoint. For this reason, the Bayesian Markov chain Monte Carlo method is developed for this problem that allows the maximum likelihood estimates of the parameters to be determined in an efficient manner. After that, the confidence intervals of the failure probability of systems are given. For an illustration of the proposed model, a numerical example about railway track is presented.