Preliminary test estimators in double sampling with two auxiliary variables

An attempt has been mads to suggest some estimators for population mean in double sampling with two auxiliary variables., alternative to the usual regression estimator. When the experimenter has partial Information about the mean of the auxiliary variable or variables, preliminary test estimators can be used. The bias, mean square error, relative efficiency and optimum allocation of sample sizes are obtained for the suggested estimators.     

The general class of chain estimators for the ratio of two means using double sampling

A wider class of chain based estimators for the ratio of two means of a finite population has been proposed by using two auxiliary variables. Singh et al.(1994) is a particular case of this class.     

Efficient utilization of two auxiliary variables in stratified double sampling

In this article, we propose a new difference-type estimator in estimating the finite population mean in stratified double sampling by using the ranks of two auxiliary variables as an additional information. The proposed estimator performs better than the usual sample mean estimator, ratio estimator, exponential estimator, Choudhury and Singh (2012) estimator, Vishwakarma and Gangele (2014) estimator, Singh and Khalid (2015) estimator, Khan and Al-Hossain (2016) estimator, Khan (2016) estimator, and the usual difference estimator. Two real datasets are used to observe the performances of estimators.     

The generalized family of estimators of population mean using auxiliary information in double sampling

Abstract

We suggested the class of estimators of the population mean with its bias and mean square error. It has been shown that the suggested class is more efficient than the usual unbiased, ratio, product and regression estimators and estimators due to Bahl and Tuteja (1991), Singh et al. (2009), and Upadhyaya et al. (2011). In addition an empirical study also carried out to and founded that the members of suggested family also have improvement over Grover and Kaur (2011) and Shabbir and Gupta (2011) classes. Two-phase (double) sampling version of the proposed class was also given.     

New calibration estimator based on two auxiliary variables in stratified sampling

In recent years, calibration estimation has become an important field of research in survey sampling. This paper proposes a new calibration estimator for the population mean in the presence of two auxiliary variables in stratified sampling. The theory of new calibration estimator is given and optimum calibration weights are derived. A simulation study is carried out to performance of the proposed calibration estimator over other existing calibration estimators. The results reveal that the proposed calibration estimators are more efficient than other existing calibration estimators in stratified sampling.     

Optimal estimation for finite population mean in two-phase sampling

Using two-phase sampling scheme, we propose a general class of estimators for finite population mean. This class depends on the sample means and variances of two auxiliary variables. The minimum variance bound for any estimator in the class is provided (up to terms of ordern ⁻¹). It is also proved that there exists at least a chain regression type estimator which reaches this minimum. Finally, it is shown that other proposed estimators can reach the minimum variance bound, i.e. the optimal estimator is not unique.     

On the use of several auxiliary variables in estimation of current population mean in successive sampling

ABSTRACT

The present work intends to put emphasis on the role of several auxiliary variables on both the occasions to improve the precision of estimates at current occasion in two-occasion successive sampling. Utilizing the readily available information on several auxiliary variables on both occasions and the information on study variable from the previous occasion, an efficient estimation procedure of population mean on current occasion has been suggested. Optimum replacement strategy and the efficiencies of the proposed estimator have been discussed. Empirical studies are carried out, and appropriate recommendations have been put forward for practical applications.     

On conditional sampling strategies

Estimation of the population average by means of a conditional strategy has been considered e.g. in [2–6,9] and [10]. Let us assume that the sampling design depends on a function of an auxiliary variable called an auxiliary statistic like: the sample mean or the sample variance. Under the conditional versions of these designs several estimators of the population mean are considered: the Horvitz-Thompson statistic, ratio and regression type estimators. The unbiasedness and accuracy of the strategies are considered. The empirical example of the accuracy comparisons of strategies is developed. The conditional strategies could improve the accuracy of estimation and protect it against outliers observations.     

A new estimator of finite population mean based on the dual use of the auxiliary information

When a sufficient correlation between the study variable and the auxiliary variable exists, the ranks of the auxiliary variable are also correlated with the study variable, and thus, these ranks can be used as an effective tool in increasing the precision of an estimator. In this paper, we propose a new improved estimator of the finite population mean that incorporates the supplementary information in forms of: (i) the auxiliary variable and (ii) ranks of the auxiliary variable. Mathematical expressions for the bias and the mean-squared error of the proposed estimator are derived under the first order of approximation. The theoretical and empirical studies reveal that the proposed estimator always performs better than the usual mean, ratio, product, exponential-ratio and -product, classical regression estimators, and Rao (1991 Rao, T.J. (1991). On certail methods of improving ration and regression estimators. Commun. Stat. Theory Methods 20(10):3325–3340.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]), Singh et al. (2009 Singh, R., Chauhan, P., Sawan, N., Smarandache, F. (2009). Improvement in estimating the population mean using exponential estimator in simple random sampling. Int. J. Stat. Econ. 3(A09):13–18. [Google Scholar]), Shabbir and Gupta (2010 Shabbir, J., Gupta, S. (2010). On estimating finite population mean in simple and stratified random sampling. Commun. Stat. Theory Methods 40(2):199–212.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]), Grover and Kaur (2011 Grover, L.K., Kaur, P. (2011). An improved estimator of the finite population mean in simple random sampling. Model Assisted Stat. Appl. 6(1):47–55. [Google Scholar], 2014) estimators.     

A control chart using an auxiliary variable and repetitive sampling for monitoring process mean

In this paper, a new control chart is proposed by using an auxiliary variable and repetitive sampling in order to enhance the performance of detecting a shift in process mean. The product-difference type estimator of the mean is plotted on the proposed control chart, which utilizes the information of an auxiliary variable correlated with the main quality variable. The proposed control chart is based on the outer and inner control limits so that repetitive sampling is allowed when the plotted statistic falls between the two limits. The average run length (ARL) of the proposed control chart is evaluated using the Monte Carlo simulation. The proposed control chart is compared with the Riaz M control chart and the results show the outperformance of the proposed control chart in terms of the ARL.     

Estimation of finite population mean in simple and stratified random sampling using two auxiliary variables

We propose an improved difference-cum-exponential ratio type estimator for estimating the finite population mean in simple and stratified random sampling using two auxiliary variables. We obtain properties of the estimators up to first order of approximation. The proposed class of estimators is found to be more efficient than the usual sample mean estimator, ratio estimator, exponential ratio type estimator, usual two difference type estimators, Rao (1991) estimator, Gupta and Shabbir (2008) estimator, and Grover and Kaur (2011) estimator. We use six real data sets in simple random sampling and two in stratified sampling for numerical comparisons.     

Utilizing auxiliary variables in sequential ratio and regression estimation schemes

Ratio and regression estimators for a mean are considered in conjunction with certain sequential sampling schemes. An auxiliary variable is assumed present and both fixed-cost and fixed- width confidence interval stopping rules are investigated. The asymptotic distributions of the estimators are derived as well as optimal probabilities pertinent to the schemes. Comparisons are made with results of certain double sampling procedures. Estimation of the ratio of two means is also considered and the results of a Monte Carlo simulation are included.     

Estimation of finite population mean using two auxiliary variables in stratified two-phase sampling

We propose a new ratio type estimator for estimating the finite population mean using two auxiliary variables in stratified two-phase sampling. Expressions for bias and mean squared error of the proposed estimator are derived up to the first order of approximation. The proposed estimator is more efficient than the usual stratified sample mean estimator, traditional stratified ratio estimator and some other stratified estimators including Bahl and Tuteja (1991 Bahl, S., Tuteja, R. K. (1991). Ratio and product type exponential estimators. Information and Optimization Sciences 12:159–163. [Google Scholar]), Chami et al. (2012 Chami, P. S., Singh, B., Thomas, D. (2012). A two-prameter ratio-product-ratio estimator using auxiliary information. ISRN Probability and Statistics 2012:1–15, doi: 10.5402/2012/103860.[Crossref] , [Google Scholar]), Chand (1975 Chand, L. (1975) Some Ratio Type Estimator Based on two or more Auxiliary Variables, Ph.D. dissertation, Iowa State University, Ames, Iowa (unpublished). [Google Scholar]), Choudhury and Singh (2012 Choudhury, S., Singh, B. K. (2012). A class of chain ratio-product type estimators with two auxiliary variables under double sampling scheme. Journal of the Korean Statistical Society 41:247–256. [Google Scholar]), Hamad et al. (2013 Hamad, N., Hanif, M., Haider, N. (2013). A regression type estimator with two auxiliary variables for two-phase sampling. Open Journal of Statistics, 3:74–78. [Google Scholar]), Vishwakarma and Gangele (2014 Vishwakarma, G. K., Gangele, R. K. (2014). A class of chain ratio-type exponential estimators in double sampling using two auxiliary variates. Applied Mathematics and Computation 227:171–175. [Google Scholar]), Sanaullah et al. (2014 Sanaullah, A., Ali, H. M., Noor ul Amin, M., Hanif, M. (2014). Generalized exponential chain ratio estimators under stratified two-phase random sampling. Applied Mathematics and Computation 226:541–547. [Google Scholar]), and Chanu and Singh (2014 Chanu, W. K., Singh, B. K. (2014). Improved class of ratio-cum-product estimators of finite population mean in two phase sampling. Global Journal of Science Frontier Research: F Mathematics and Decision Sciences 14(2):1–14. [Google Scholar]).     

基于回归组合技术的连续性抽样估计方法研究

在使用样本轮换的连续性抽样调查中,不仅可以利用前期调查的研究变量的信息,还可使用现期调查的辅助变量信息来建立回归模型进行回归估计,进而构造回归组合估计量,并在此基础上确定最优样本轮换率和最优权重系数,使得回归组合估计量的方差最小,从而更大程度地提高连续性抽样调查的估计精度。     

Chain ratio type estimator for ratio of two population m3ans using auxiliary characters

In this paper we have proposed chain ratio type estimators for ratio of two population means using two auxiliary characters. The expressions for bias and mean square error of these estimators have been derived. A comparison of the proposed estimator with that of double sampling estimator has been made in terms of mean square error. An emperical study has also been made.     

A joint-adaptive np control chart with multiple dependent state sampling scheme

Although the classical Shewhart np control chart has been widely used to detect an out-of-control status of manufacturing process, it is static and there is lack of responsiveness to slight process changes. In this paper, an adaptive np control chart with a joint sampling strategy combining double sampling (DS) and variable sampling interval (VSI) is developed. The multiple dependent state sampling scheme is adopted to further improve the performance of the control chart. An economical design model to minimize the general cost of using the proposed chart is established and solved by a genetic algorithm. The numerical results show that comparing to traditional static np control chart, the proposed np chart yields better performance in terms of shorter time to signal an out-of-control process and less expected cost per unit of time. Comparisons are made to show the capability of the proposed chart in yielding average reductions of 5.01% and 8.89%, in the cost of the proposed model compared to situations in which either the DSVSI np chart or the traditional np chart is used.     

A simulation study: estimation of population mean using two auxiliary variables in stratified random sampling

ABSTRACT

This paper deals with the problem of estimating the finite population mean in stratified random sampling by using two auxiliary variables. This paper proposed a ratio-cum-product exponential type estimator of population mean under different situations: (i) when there is presence of non-response and measurement errors on the study as well as auxiliary variables; (ii) when there is non-response on the study and auxiliary variables but with no measurement error; (iii) when there is complete response on study variable but there is presence of non-response and measurement error on the auxiliary variables and (iv) when there are complete response and measurement error on study as well as auxiliary variables. The expressions of the bias and mean square error of the proposed estimator have been obtained up to the first degree of approximation. The proposed estimator has been compared with usual unbiased estimator, ratio estimator and other existing estimators and the conditions obtained to show the efficacy of the proposed estimator over other considered estimators. Simulation study is carried out to support the theoretical findings.     

Variance estimation in adaptive cluster sampling

Abstract

In this paper, a class of variance estimator is proposed of a finite population variance under an adaptive cluster sampling design in the presence of information on an auxiliary variable. We obtain expressions for the mean square error and bias for the developed estimators and their performance is evaluated on a Poisson clustered process and a real data set. The simulation study evaluates the efficiency of the suggested estimators for an adaptive cluster sampling (ACS) design and the Isaki (1983 Isaki, C. T. 1983. Variance estimation using auxiliary information. Journal of the American Statistical Association 78 (381):117–23. doi: 10.1080/01621459.1983.10477939.[Taylor & Francis Online], [Web of Science ®] , [Google Scholar]) estimator of the variance for SRSWOR over the sample variance for SRSWOR.