Stochastic analysis of covariance when the error distribution is long-tailed symmetric

In this study, we consider stochastic one-way analysis of covariance model when the distribution of the error terms is long-tailed symmetric. Estimators of the unknown model parameters are obtained by using the maximum likelihood (ML) methodology. Iteratively reweighting algorithm is used to compute the ML estimates of the parameters. We also propose new test statistic based on ML estimators for testing the linear contrasts of the treatment effects. In the simulation study, we compare the efficiencies of the traditional least-squares (LS) estimators of the model parameters with the corresponding ML estimators. We also compare the power of the test statistics based on LS and ML estimators, respectively. A real-life example is given at the end of the study.     

Sufficiency of a sufficient statistic for equivariant estimation

Suppose an estimation problem is invariant under a group of transformations and one is interested in finding an optimal equivariant estimator. The usual proactice is to confine attention to non-randomized equivariant estimators based on a minimal sufficient statistic. A justification of this restriction to a smaller clas of estimators is given in this paper under certain conditions.     

Penalized calibration in survey sampling: Design-based estimation assisted by mixed models

Calibration techniques in survey sampling, such as generalized regression estimation (GREG), were formalized in the 1990s to produce efficient estimators of linear combinations of study variables, such as totals or means. They implicitly lie on the assumption of a linear regression model between the variable of interest and some auxiliary variables in order to yield estimates with lower variance if the model is true and remaining approximately design-unbiased even if the model does not hold. We propose a new class of model-assisted estimators obtained by releasing a few calibration constraints and replacing them with a penalty term. This penalization is added to the distance criterion to minimize. By introducing the concept of penalized calibration, combining usual calibration and this ‘relaxed’ calibration, we are able to adjust the weight given to the available auxiliary information. We obtain a more flexible estimation procedure giving better estimates particularly when the auxiliary information is overly abundant or not fully appropriate to be completely used. Such an approach can also be seen as a design-based alternative to the estimation procedures based on the more general class of mixed models, presenting new prospects in some scopes of application such as inference on small domains.     

Estimators of Certain Functions of the Variance of a Normal Distribution

Estimators of σ^aand log σ which are functions of Σ(x?x)²/d are considered. Besides the usual sampling theory estimators, Bayesian point estimators which are the usual measures of location of the posterior distribution are given, and in each case an exact or asymptotic expression for the divisor d is stated.     

Estimating Damages in a Class Action Litigation

In a class action litigation, actual damages are not known exactly and must be estimated. Various estimators are proposed and assessed by using a model that identifies possible sources of error. Estimators that have been used in practice are shown to be seriously biased. An empirical Bayes estimator and an empirical minimal mean squared error estimator are found to be more satisfactory methods for estimating damages.     

ANCILLARIES SUFFICIENT FOR THE SAMPLE SIZE1

The process of recovery of information proceeds by conditioning on ancillaries which are part of the minimal sufficient statistic (MSS), so-called internal ancillaries. This is motivated by the notion that ancillaries function as precision indices. In some cases the ancillary can itself replace the sample size entirely in the model. It is decided that such ancillaries must be conditioned on if one of the sufficiency or conditionality principles is not to be violated.     

The 'improved' brown and forsythe test for mean equality: some things can't be fixed

Mehrotra (1997) presented an ‘;improved’ Brown and Forsythe (1974) statistic which is designed to provide a valid test of mean equality in independent groups designs when variances are heterogeneous. In particular, the usual Brown and Fosythe procedure was modified by using a Satterthwaite approximation for numerator degrees of freedom instead of the usual value of number of groups minus one. Mehrotra then, through Monte Carlo methods, demonstrated that the ‘improved’ method resulted in a robust test of significance in cases where the usual Brown and Forsythe method did not. Accordingly, this ‘improved’ procedure was recommended. We show that under conditions likely to be encountered in applied settings, that is, conditions involving heterogeneous variances as well as nonnormal data, the ‘improved’ Brown and Forsythe procedure results in depressed or inflated rates of Type I error in unbalanced designs. Previous findings indicate, however, that one can obtain a robust test by adopting a heteroscedastic statistic with the robust estimators, rather than the usual least squares estimators, and further improvement can be expected when critical significance values are obtained through bootstrapping methods.     

Robust Estimation and Hypothesis Testing of Linear Contrasts in Analysis of Covariance with Stochastic Covariates

Estimators of parameters are derived by using the method of modified maximum likelihood (MML) estimation when the distribution of covariate X and the error e are both non-normal in a simple analysis of covariance (ANCOVA) model. We show that our estimators are efficient. We also develop a test statistic for testing a linear contrast and show that it is robust. We give a real life example.     

Hypothesis Testing in Functional Comparative Calibration Models

The purpose of this article is to investigate hypothesis testing in functional comparative calibration models. Wald type statistics are considered which are asymptotically distributed according to the chi-square distribution. The statistics are based on maximum likelihood, corrected score approach, and method of moment estimators of the model parameters, which are shown to be consistent and asymptotically normally distributed. Results of analytical and simulation studies seem to indicate that the Wald statistics based on the method of moment estimators and the corrected score estimators are, as expected, less efficient than the Wald type statistic based on the maximum likelihood estimators for small n. Wald statistic based on moment estimators are simpler to compute than the other Wald statistics tests and their performance improves significantly as n increases. Comparisons with an alternative F statistics proposed in the literature are also reported.     

A note on fiducial generalized pivots for in one-way heteroscedastic ANOVA with random effects

The paper deals with generalized confidence intervals for the between-group variance in one-way heteroscedastic (unbalanced) ANOVA with random effects. The approach used mimics the standard one applied in mixed linear models with two variance components, where interval estimators are based on a minimal sufficient statistic derived after an initial reduction by the principle of invariance. A minimal sufficient statistic under heteroscedasticity is found to resemble its homoscedastic counterpart and further analogies between heteroscedastic and homoscedastic cases lead us to two classes of fiducial generalized pivots for the between-group variance. The procedures suggested formerly by Wimmer and Witkovský [Between group variance component interval estimation for the unbalanced heteroscedastic one-way random effects model, J. Stat. Comput. Simul. 73 (2003), pp. 333–346] and Li [Comparison of confidence intervals on between group variance in unbalanced heteroscedastic one-way random models, Comm. Statist. Simulation Comput. 36 (2007), pp. 381–390] are found to belong to these two classes. We comment briefly on some of their properties that were not mentioned in the original papers. In addition, properties of another particular generalized pivot are considered.     

Change points in nonparametric regresion functions

Estimators of location and size of jumps or discontinuities in a regression function and/or its derivatives are proposed. The estimators are based on the analysis of residuals obtained from the locally weighted least squares regression. The proposed estimators adapt to both fixed and random designs. The asymptotic properties of the estimators are investigated. The method is illustrated through simulation studies.     

On the Order of Data Reductions by Ancillarity and by Sufficiency

In the context of frequentist inference there are strong arguments in favour of data reduction by both (a) conditioning on the most appropriate ancillary statistic and (b) restricting attention to a minimal sufficient statistic. However, significantly for the study of the foundations of frequentist inference, there are some examples in which the order of application of these data reductions has an important bearing on the statistical inference of interest. This paper presents a new simple example of this kind.     

A new geometric first-order integer-valued autoregressive (NGINAR(1)) process

A new stationary first-order integer-valued autoregressive process with geometric marginal distributions is introduced based on negative binomial thinning. Some properties of the process are established. Estimators of the parameters of the process are obtained using the methods of conditional least squares, Yule–Walker and maximum likelihood. Also, the asymptotic properties of the estimators are derived involving their distributions. Some numerical results of the estimators are presented with a discussion to the obtained results. Real data are used and a possible application is discussed.     

A Metropolis algorithm to obtain co-sufficient samples with applications in conditional tests

ABSTRACT

Conditional tests are constructed by conditioning a fit measure to a minimal sufficient statistic. To calculate the p-value of these tests, Monte Carlo methods with co-sufficient samples can be used. In this paper we show how to simulate co-sufficient samples when the data distribution belongs to the exponential family with doubly transitive sufficient statistics. The proposed method is illustrated using the beta distribution.     

Improved estimation of the mean vector for student-t model

Improved James-Stein type estimation of the mean vector μ of a multovaroate Student-t population of dimension p with ν degrees of freedom is considered. In addition to the sample data, uncertain prior information on the value of the mean vector, in the form of a null hypothesis, is used for the estiamtion. The usual maximum liklihood estimator((mle) of μ is obtained and a test statistic for testing H₀:μ=μ₀ is derived. Based on the mle of μ and the tes statistic the preliminary test estimator (PTE), Stein-type shrinkage estimator (SE) and positive-rule shrinkage esiimator (PRSE) are defined. The bias and the quadratic risk of the estimators are evaiuated. The relative performances of the estimators are mvestigated by analyzing the risks under different condltlons It is observed that the FRSE dommates over he other three estimators, regardless of the vaiidity of the null hypothesis and the value ν.     

Estimation and inference for varying coefficient partially nonlinear errors-in-variables models

In this article, we study the varying coefficient partially nonlinear model with measurement errors in the nonparametric part. A local corrected profile nonlinear least-square estimation procedure is proposed and the asymptotic properties of the resulting estimators are established. Further, a generalized likelihood ratio (GLR) statistic is proposed to test whether the varying coefficients are constant. The asymptotic null distribution of the statistic is obtained and a residual-based bootstrap procedure is employed to compute the p-value of the statistic. Some simulations are conducted to evaluate the performance of the proposed methods. The results show that the estimating and testing procedures work well in finite samples.     

MODEL-UNBIASEDNESS AND THE HORVITZ-THOMPSON ESTIMATOR IN FINITE POPULATION SAMPLING

Under the, notion of superpopulation models, the concept of minimum expected variance is adopted as an optimality criterion for design-unbiased estimators, i.e. unbiased under repeated sampling. In this article, it is shown that the Horvitz-Thompson estimator is optimal among such estimators if and only if it is model-unbiased, i.e. unbiased under the model. The family of linear models is considered and a sample design is suggested to preserve the model-unbiasedness (and hence the optimality) of the Horvitz-Thompson estimator. It is also shown that under these models the Horvitz-Thompson estimator together with the suggested sample design is optimal among design-unbiased estimators with any sample design (of fixed size n ) having non-zero probabilities of inclusion for all population units.     

An asymptotic equivalence of the cross-data and predictive estimators

Abstract

Estimators using multiplicative tuning parameters for maximum likelihood estimators in cross-validation are called cross-data estimators in this paper. Single-sample versions of the cross-data estimators have been called predictive estimators in literatures, which are given by maximizing the expected log-likelihood, where the two-fold expectations are taken over the distributions of future and current data using maximum likelihood estimators based on current data. An asymptotic equivalence of the cross-data and predictive estimators is shown, which guarantees an optimality of the predictive estimator when an unknown population parameter vector is replaced by the sample counterpart. Examples using typical statistical distributions are shown.     

Estimation of the Parameters of the Birnbaum–Saunders Distribution

Some alternative estimators to the maximum likelihood estimators of the two parameters of the Birnbaum–Saunders distribution are proposed. Most have high efficiencies as measured by root mean square error and are robust to departure from the model as well as to outliers. In addition, the proposed estimators are easy to compute. Both complete and right-censored data are discussed. Simulation studies are provided to compare the performance of the estimators.