Sample size determination for estimating multivariate process capability indices based on lower confidence limits

With the advent of modern technology, manufacturing processes have become very sophisticated; a single quality characteristic can no longer reflect a product's quality. In order to establish performance measures for evaluating the capability of a multivariate manufacturing process, several new multivariate capability (NMC) indices, such as NMC _p and NMC _pm , have been developed over the past few years. However, the sample size determination for multivariate process capability indices has not been thoroughly considered in previous studies. Generally, the larger the sample size, the more accurate an estimation will be. However, too large a sample size may result in excessive costs. Hence, the trade-off between sample size and precision in estimation is a critical issue. In this paper, the lower confidence limits of NMC _p and NMC _pm indices are used to determine the appropriate sample size. Moreover, a procedure for conducting the multivariate process capability study is provided. Finally, two numerical examples are given to demonstrate that the proper determination of sample size for multivariate process indices can achieve a good balance between sampling costs and estimation precision.     

A process capability index for discrete processes

Perakis and Xekalaki 2002, A process capability index that is based on the proportion of conformance. Journal of Statistical Computation and Simulation, 72(9), 707–718. introduced a process capability index that is based on the proportion of conformance of the process under study and has several appealing features. One of its advantages is that it can be used not only for continuous processes, as is the case with the majority of the indices considered in the literature, but also for discrete processes as well. In this article, the use of this index is investigated for discrete data under two alternative models, which are frequently considered in statistical process control. In particular, distributional properties and estimation of the index are considered for Poisson processes and for processes resulting in modeling attribute data. The performance of the suggested estimators and confidence limits is tested via simulation.     

Multivariate process capability a bayesian perspective

In this paper an attempt has been made to examine the multivariate versions of the common process capability indices (PCI's) denoted by C_p and C_pk . Markov chain Monte Carlo (MCMC) methods are used to generate sampling distributions for the various PCI's from where inference is performed. Some Bayesian model checking techniques are developed and implemented to examine how well our model fits the data. Finally the methods are exemplified on a historical aircraft data set collected by the Pratt and Whitney Company.     

生活质量的综合评价：基于数据函数性特征的方法

生活质量的评价与分析是生活质量研究中的核心问题，现有的对生活质量进行综合评价的方法，共同具有的缺憾是方法所处理的数据要么是横截面数据，要么是时间序列数据。然而，实际中可获得的样本资料往往是横截面数据与时间序列数据融合在一起的函数性数据。为弥补现有方法的缺陷，基于数据的函数性特征，引入一种对生活质量进行综合评价和分析的全新方法。从数据信息利用的程度来看，其方法明显优于现有的方法。     

The probability density function of process capability index Cpmk

We derive an explicit and computationally convenient form for the probability density function of the estimator of the process capability index C_pmk ( Pearn, Kotz and Johnson ), when sampling from a normal distribution.     

Discriminant coordinates analysis for multivariate functional data

Abstract

One of the basic statistical methods of dimensionality reduction is analysis of discriminant coordinates given by Fisher (1936 Fisher, R. A. 1936. The use of multiple measurements in taxonomic problem. Annals of Eugenics 7 (2):179–88. doi:10.1111/j.1469-1809.1936.tb02137.x.[Crossref] , [Google Scholar]) and Rao (1948). The space of discriminant coordinates is a space convenient for presenting multidimensional data originating from multiple groups and for the use of various classification methods (methods of discriminant analysis). In the present paper, we adapt the classical discriminant coordinates analysis to multivariate functional data. The theory has been applied to analysis of textural properties of apples of six varieties, measured over a period of 180?days, stored in two types of refrigeration chamber.     

函数性数据的统计分析：思想、方法和应用

 摘　　要:实际中，越来越多的研究领域所收集到的样本观测数据具有函数性特征，这种函数性数据是融合时间序列和横截面两者的数据，有些甚是曲线或其他函数图像。虽然计量经济学近二十多年来发展的面板数据分析方法，具有很好的应用价值，但是面板数据只是函数性数据的一种特殊类型，且其分析方法太过于依赖模型的线性结构和假设条件等。本文基于函数性数据的普遍特征，介绍一种对其进行分析的全新方法，并率先使用该方法对经济函数性数据进行分析，拓展了函数性数据分析的应用范围。分析结果表明，函数性数据分析方法，较之计量经济学和其他统计方法具有更多的优越性，尤其能够揭示其他方法所不能揭示的数据特征     

Dihedral angles principal geodesic analysis using nonlinear statistics

Statistics, as one of the applied sciences, has great impacts in vast area of other sciences. Prediction of protein structures with great emphasize on their geometrical features using dihedral angles has invoked the new branch of statistics, known as directional statistics. One of the available biological techniques to predict is molecular dynamics simulations producing high-dimensional molecular structure data. Hence, it is expected that the principal component analysis (PCA) can response some related statistical problems particulary to reduce dimensions of the involved variables. Since the dihedral angles are variables on non-Euclidean space (their locus is the torus), it is expected that direct implementation of PCA does not provide great information in this case. The principal geodesic analysis is one of the recent methods to reduce the dimensions in the non-Euclidean case. A procedure to utilize this technique for reducing the dimension of a set of dihedral angles is highlighted in this paper. We further propose an extension of this tool, implemented in such way the torus is approximated by the product of two unit circle and evaluate its application in studying a real data set. A comparison of this technique with some previous methods is also undertaken.     

Estimation on semi-functional linear errors-in-variables models

Abstract

Semi-functional linear regression models are important in practice. In this paper, their estimation is discussed when function-valued and real-valued random variables are all measured with additive error. By means of functional principal component analysis and kernel smoothing techniques, the estimators of the slope function and the non parametric component are obtained. To account for errors in variables, deconvolution is involved in the construction of a new class of kernel estimators. The convergence rates of the estimators of the unknown slope function and non parametric component are established under suitable norm and conditions. Simulation studies are conducted to illustrate the finite sample performance of our method.     

Testing process capability based on Cpm in the presence of random measurement errors

Process capability indices have been widely used in the manufacturing industry providing numerical measures on process performance. The index C_p provides measures on process precision (or product consistency). The index C_pm, sometimes called the Taguchi index, meditates on process centring ability and process loss. Most research work related to C_p and C_pm assumes no gauge measurement errors. This assumption insufficiently reflects real situations even with highly advanced measuring instruments. Conclusions drawn from process capability analysis are therefore unreliable and misleading. In this paper, we conduct sensitivity investigation on process capability C_p and C_pm in the presence of gauge measurement errors. Due to the randomness of variations in the data, we consider capability testing for C_p and C_pm to obtain lower confidence bounds and critical values for true process capability when gauge measurement errors are unavoidable. The results show that the estimator with sample data contaminated by the measurement errors severely underestimates the true capability, resulting in imperceptible smaller test power. To obtain the true process capability, adjusted confidence bounds and critical values are presented to practitioners for their factory applications.     

A new generation of process capability indices

In quality control, we may confront imprecise concepts. One case is a situation in which upper and lower specification limits (SLs) are imprecise. If we introduce vagueness into SLs, we face quite new, reasonable and interesting processes, and the ordinary capability indices are not appropriate for measuring the capability of these processes. In this paper, similar to the traditional process capability indices (PCIs), we develop a fuzzy analogue by a distance defined on a fuzzy limit space and introduce PCIs, where instead of precise SLs we have two membership functions for upper and lower SLs. These indices are necessary when SLs are fuzzy, and they are helpful for comparing manufacturing process with fuzzy SLs. Some interesting relations among these introduced indices are proved. Numerical examples are given to clarify the method.     

Composite likelihood estimation in multivariate data analysis

The authors propose two composite likelihood estimation procedures for multivariate models with regression/univariate and dependence parameters. One is a two‐stage method based on both univariate and bivariate margins. The other estimates all the parameters simultaneously based on bivariate margins. For some special cases, the authors compare their asymptotic efficiencies with the maximum likelihood method. The performance of the two methods is reasonable, except that the first procedure is inefficient for the regression parameters under strong dependence. The second approach is generally better for the regression parameters, but less efficient for the dependence parameters under weak dependence.     

Estimation of multivariate conditional-tail-expectation using Kendall's process

This paper deals with the problem of estimating the multivariate version of the Conditional-Tail-Expectation, proposed by Di Bernardino et al. [(2013), ‘Plug-in Estimation of Level Sets in a Non-Compact Setting with Applications in Multivariable Risk Theory’, ESAIM: Probability and Statistics, (17), 236–256]. We propose a new nonparametric estimator for this multivariate risk-measure, which is essentially based on Kendall's process [Genest and Rivest, (1993), ‘Statistical Inference Procedures for Bivariate Archimedean Copulas’, Journal of American Statistical Association, 88(423), 1034–1043]. Using the central limit theorem for Kendall's process, proved by Barbe et al. [(1996), ‘On Kendall's Process’, Journal of Multivariate Analysis, 58(2), 197–229], we provide a functional central limit theorem for our estimator. We illustrate the practical properties of our nonparametric estimator on simulations and on two real test cases. We also propose a comparison study with the level sets-based estimator introduced in Di Bernardino et al. [(2013), ‘Plug-In Estimation of Level Sets in A Non-Compact Setting with Applications in Multivariable Risk Theory’, ESAIM: Probability and Statistics, (17), 236–256] and with (semi-)parametric approaches.     

The asymptotic distribution of the process capability index Cpmk

The main result of this paper is that under some regularity conditions, the distribution of an estimator of the process capability index C_pmk is asymptotically normal.     

Estimating total and specific process capability indices in three-stage processes with measurement errors

In multistage processes, two kinds of process capability indices (specific and total process capability indices) are defined in each stage. The total process capability index calculates the capability of each stage when it is affected by the previous stages and the specific process capability index calculates the capability of the stage when the effects of the previous stages are eliminated. Process capability indices in multistage processes are proposed under the assumption of no measurement errors. However, sometimes this assumption may be violated and leads to misleading interpretations. In this paper, the effects of measurement errors on the specific and total process capability indices in the second and third stages of the three-stage processes are statistically analysed. In addition, the effects of the measurement errors on the bias and the mean square error value of the total and specific process capability indices in the second and third stages are studied. Finally, the effects of the measurement errors on the specific and total process capability indices are shown through a numerical example.     

On the generalized process capability under simple and mixture models

Process capability (PC) indices measure the ability of a process of interest to meet the desired specifications under certain restrictions. There are a variety of capability indices available in literature for different interest variables such as weights, lengths, thickness, and the life time of items among many others. The goal of this article is to study the generalized capability indices from the Bayesian view point under different symmetric and asymmetric loss functions for the simple and mixture of generalized lifetime models. For our study purposes, we have covered a simple and two component mixture of Maxwell distribution as a special case of the generalized class of models. A comparative discussion of the PC with the mixture models under Laplace and inverse Rayleigh are also included. Bayesian point estimation of maintenance performance of the system is also part of the study (considering the Maxwell failure lifetime model and the repair time model). A real-life example is also included to illustrate the procedural details of the proposed method.     

Geometric aspects of deletion diagnostics in multivariate regression

In multivariate regression, a graphical diagnostic method of detecting observations that are influential in estimating regression coefficients is introduced. It is based on the principal components and their variances obtained from the covariance matrix of the probability distribution for the change in the estimator of the matrix of unknown regression coefficients due to a single-case deletion. As a result, each deletion statistic obtained in a form of matrix is transformed into a two-dimensional quantity. Its univariate version is also introduced in a little different way. No distributional form is assumed. For illustration, we provide a numerical example in which the graphical method introduced here is seen to be effective in getting information about influential observations.     

Sensitivity analysis in multivariate methods: Decomposition of an arbitrary influence into a finite number of components

The influence function of the covariance matrix is decomposed into a finite number of components. This decomposition provides a useful tool to develop efficient methods for computing empirical influence curves related to various multivariate methods. It can also be used to characterize multivariate methods from the sensitivity perspective. A numerical example is given to demonstrate efficient computing and to characterize some procedures of exploratory factor analysis.     

Developing and designing of an efficient variables sampling system based on the process capability index

Process capability indices (PCIs) are extensively used in the manufacturing industries in order to confirm whether the manufactured products meet their specifications or not. PCIs can be used to judge the process precision, process accuracy, and the process performance. So developing of sampling plans based on PCIs is inevitable and those plans will be very much useful for maintaining and improving the product quality in the manufacturing industries. In view of this, we propose a variables sampling system based on the process capability index C_pmk, which takes into account of process yield and process loss, when the quality characteristic under study will have double specification limits. The proposed sampling system will be effective in compliance testing. The advantages of this system over the existing sampling plans are also discussed. In order to determine the optimal parameters, tables are also constructed by formulating the problem as a nonlinear programming in which the average sample number is minimized by satisfying the producer and consumer risks.