Optimal two treatment repeated measurement designs for three periods

Repeated Measurement Designs, with two treatments, n (experimental) units and p periods are examined, the two treatments are denoted A and B. The model with independent observations within and between treatment sequences is used. Optimal designs are derived for: (i) the difference of direct treatment effects and the difference of residual effects, (ii) the difference of direct treatment effects, and (iii) the difference of residual effects. We prove that for three periods when n is odd the optimal design in the three cases (i), (ii), and (iii) is determined by taking the sequences BAA and ABB in numbers differing by one. If n is even, the optimal design in cases (i), (ii), and (iii) is again the same, by taking the sequences ABB and BAA in equal numbers. In case (i), for n even or odd, in the optimal design there is no correlation between the two estimated parameters. For n even, case (i) was solved by Cheng and Wu in 1980. The above imply that with two treatments in practice are preferable to use three periods instead of two.     

Optimal designs for the development of personalized treatment rules

We study the design of multi-armed parallel group clinical trials to estimate personalized treatment rules that identify the best treatment for a given patient with given covariates. Assuming that the outcomes in each treatment arm are given by a homoscedastic linear model, with possibly different variances between treatment arms, and that the trial subjects form a random sample from an unselected overall population, we optimize the (possibly randomized) treatment allocation allowing the allocation rates to depend on the covariates. We find that, for the case of two treatments, the approximately optimal allocation rule does not depend on the value of the covariates but only on the variances of the responses. In contrast, for the case of three treatments or more, the optimal treatment allocation does depend on the values of the covariates as well as the true regression coefficients. The methods are illustrated with a recently published dietary clinical trial.     

Fisher''s inequality for designs on regular graphs

Let G=(V,E) be a regular graph of valency d. A (v,k,λ,μ)-design over G is a pair , where is a family of k-subsets of V (blocks) such that for any distinct vertices x and y, the number of blocks containing {x,y} is equal to λ if {x,y} is an edge and is equal to μ if {x,y} is not an edge. We will prove that the number of vertices does not exceed the number of blocks (Fisher's Inequality) under the following condition: (r−μ)/(μ−λ) is not a multiple eigenvalue of the adjacency matrix of the graph (r is the replication number of the design). We also give examples showing that this restriction is essential.     

Optimal designs for exponential regression

This paper is concerned with the optimal design problem for the particular case of non-linear parametrisation:the parameters to be estimated are included in exponents.Some properties of locally optimal designs as functions of estimated parameters are investigated and a table of such designs in given.We consider also designs to be optimal in the sense of minimax approach.     

Optimal designs for copula models

Copula modelling has in the past decade become a standard tool in many areas of applied statistics. However, a largely neglected aspect concerns the design of related experiments. Particularly the issue of whether the estimation of copula parameters can be enhanced by optimizing experimental conditions and how robust all the parameter estimates for the model are with respect to the type of copula employed. In this paper an equivalence theorem for (bivariate) copula models is provided that allows formulation of efficient design algorithms and quick checks of whether designs are optimal or at least efficient. Some examples illustrate that in practical situations considerable gains in design efficiency can be achieved. A natural comparison between different copula models with respect to design efficiency is provided as well.     

Optimal foldover designs

An obvious strategy for obtaining a Doptimal foldover design for p factors at two levels each in 2N runs is to fold a Doptimal main effects plan. We show that this strategy works except when N = 4t + 2 and s is even In that case there are two different classes of D-optimal main effects plans with N runs that have the same determinant. However folding them gives two different values foi the D-optimality criteiion One set of designs is D-optimal The other is not.     

Optimal few-stage designs

Optimal designs are presented for experiments in which sampling is carried out in stages. There are two Bernoulli populations and it is assumed that the outcomes of the previous stage are available before the sampling design for the next stage is determined. At each stage, the design specifies the number of observations to be taken and the relative proportion to be sampled from each population. Of particular interest are 2- and 3-stage designs.To illustrate that the designs can be used for experiments of useful sample sizes, they are applied to estimation and optimization problems. Results indicate that, for problems of moderate size, published asymptotic analyses do not always represent the true behavior of the optimal stage sizes, and efficiency may be lost if the analytical results are used instead of the true optimal allocation.The exactly optimal few stage designs discussed here are generated computationally, and the examples presented indicate the ease with which this approach can be used to solve problems that present analytical difficulties. The algorithms described are flexible and provide for the accurate representation of important characteristics of the problem.     

Optimal designs for generalized linear models

Summary This paper solves some D-optimal design problems for certain Generalized Linear Models where the mean depends on two parameters and two explanatory variables. In all of the cases considered the support point of the optimal designs are found to be independent of the unknown parameters. While in some cases the optimal design measures are given by two points with equal weights, in others the support is given by three point with weights depending on the unknown parameters, hence the designs are locally optimal in general. Empirical results on the efficiency of the locally optimal designs are also given. Some of the designs found can also be used for planning D-optimal experiments for the normal linear model, where the mean must be positive. This research was carried out in part at University College, London as an M.Sc. project. Thanks are due to Prof. I. Ford (University of Glasgow) and Prof. A. Giovagnoli (University of Perugia) for their valuable suggestions and critical observations.     

Optimal designs for tumor regrowth models

Most growth curves can only be used to model the tumor growth under no intervention. To model the growth curves for treated tumor, both the growth delay due to the treatment and the regrowth of the tumor after the treatment need to be taken into account. In this paper, we consider two tumor regrowth models and determine the locally D- and c-optimal designs for these models. We then show that the locally D- and c-optimal designs are minimally supported. We also consider two equally spaced designs as alternative designs and evaluate their efficiencies.     

E- and R-optimality of block designs for treatment-control comparisons

Abstract

We study optimal block designs for comparing a set of test treatments with a control treatment. We provide the class of all E-optimal approximate block designs, which is characterized by simple linear constraints. Based on this characterization, we obtain a class of E-optimal exact designs for unequal block sizes. In the studied model, we provide a statistical interpretation for wide classes of E-optimal designs. Moreover, we show that all approximate A-optimal designs and a large class of A-optimal exact designs for treatment-control comparisons are also R-optimal. This reinforces the observation that A-optimal designs perform well even for rectangular confidence regions.     

Optimal designs for covariates’ models

A linear model with one treatment at V levels and first order regression on K continuous covariates with values on a K-cube is considered. The D-criterion is used to judge the ‘goodness’ of any design for estimating the parameters of this model. Since this criterion is based on the determinant of the information matrix M(d) of a design d, upper bounds for |M(d)| yield lower bounds for the D-efficiency of any design d in estimating the vector of parameters in the model. We consider here only classes of designs d for which the number N of observations to be taken is a multiple of V, that is, there exists R≥2 such that N=V×R.Under these conditions, we determine the maximum of |M(d)|, and conditions under which the maximum is attained. These conditions include R being even, each treatment level being observed the same number of times, that is, R times, and N being a multiple of four. For the other cases of congruence of N (modulo 4) we further determine upper bounds on |M (d)| for equireplicated designs, i.e. for designs with equal number of observations per treatment level. These upper bounds are shown to depend also on the congruence of V (modulo 4). For some triples (N,V,K), the upper bounds determined are shown to be attained.Construction methods yielding families of designs which attain the upper bounds of |M(d)| are presented, for each of the sixteen cases of congruence of N and V.We also determine the upper bound for D-optimal designs for estimating only the treatment parameters, when first order regression on one continuous covariate is present.     

Optimal change-over designs for correlated observations

Design implications of an autoregressive model for change-over experiments are investigated. In this model, the residual effect due to the previous treatment is assumed to be proportional to the response in the previous period. In addition, the errors from the same experimental subject are assumed to be correlated according to a first-order autoregressive model. Models with fixed and random subject effects are discussed separately. An attempt has been made to identify and construct optimal or nearly optimal designs in various situations. Empirical conclusions of Taka and Armitage [Commun. Statist. Theor. Meth. (1983)12, 865-876] regarding the efficiency of some designs have also been confirmed.     

Optimal designs for calibration of orientations

This paper concerns designed experiments involving observations of orientations following the models of Prentice (1989) and Rivest &Chang (2006). The authors state minimal conditions on the designs for consistent least squares estimation of the matrix parameters in these models. The conditions are expressed in terms of the axes and rotation angles of the design orientations. The authors show that designs satisfying U₁ + … + U_n = 0 are optimal in the sense of minimizing the estimation error average angular distance. The authors give constructions of optimal n‐point designs when n ≥ 4 and they compare the performance of several designs through approximations and simulation.     

Optimal discrimination designs for exponential regression models

We investigate optimal designs for discriminating between exponential regression models of different complexity, which are widely used in the biological sciences; see, e.g., Landaw [1995. Robust sampling designs for compartmental models under large prior eigenvalue uncertainties. Math. Comput. Biomed. Appl. 181–187] or Gibaldi and Perrier [1982. Pharmacokinetics. Marcel Dekker, New York]. We discuss different approaches for the construction of appropriate optimality criteria, and find sharper upper bounds on the number of support points of locally optimal discrimination designs than those given by Caratheodory's Theorem. These results greatly facilitate the numerical construction of optimal designs. Various examples of optimal designs are then presented and compared to different other designs. Moreover, to protect the experiment against misspecifications of the nonlinear model parameters, we adapt the design criteria such that the resulting designs are robust with respect to such misspecifications and, again, provide several examples, which demonstrate the advantages of our approach.     

Optimal block designs for double cross experiments

ABSTRACT

This paper presents systematic methods of construction of optimal block designs for a double cross experiments for both even and odd values of “p” parental lines. The both even and odd values of designs are derived by using initial block of unreduced balanced incomplete block designs and initial block of row–column designs given by Bose et al. (1953 Bose, R.C., Shrikhande, S.S., Bhattacharya, K.N. (1953). On the construction of group divisible incomplete block design. Ann. Math. Stat. 24:167–195.[Crossref] , [Google Scholar]) and Gupta and Choi (1998 Gupta, S., Choi, K.C. (1998). Optimal row-column designs for complete diallel crosses. Commun. Stat. Theory Methods 27(11):2827–2835.[Taylor & Francis Online], [Web of Science ®] , [Google Scholar]), respectively. In this attempt we have found some new universally optimal block designs for double cross experiments.     

Optimal designs for beta-binomial logistic regression models

Optimal designs for a logistic regression model with over-dispersion introduced by a beta-binomial distribution are characterized. Designs are defined by a set of design points and design weights as usual but, in addition, the experimenter must also make a choice of a sub-sampling design specifying the distribution of observations on sample sizes. In an earlier work it has been shown that Ds-optimal sampling designs for estimation of the parameters of the beta-binomial distribution are supported on at most two design points. This admits a simplified approach using single sample sizes. Linear predictor values for Ds-optimal designs using a common sample size are tabulated for different levels of over-dispersion and choice of subsets of parameters.     

Optimal block designs for triallel cross experiments

Optimal block designs for a certain type of triallel cross experiments are investigated. Nested balanced block designs are introduced and it is shown how these designs give rise to optimal designs for triallel crosses. Several .series of nested balanced block designs, leading to optimal designs for triallel crosses are reported.