Some adjusted orthogonal,variance balanced,multidimensional block designs

A multidimensional block design (MBD) is an experimental design with d > 1 blocking criteria geometrically represented as a d-dimensional lattice with treatment varieties assigned to some or all nodes of the lattice. Intrablock analysis of variance tables for some special classes of two- and three-dimensional block designs with some empty nodes are given. Design plans and efficiencies for 31 two-dimensional designs, each universally optimal in defined classes of designs, and 7 three-dimensional designs, each nearly optimal in defined classes of designs, are listed in the appendices. A need for such designs is apparent when the blocking criteria are implemented successively and empty nodes do not represent wasted experimental units.     

On some DS-optimal designs in spherical regions

For polynomial regression over spherical regions the d-th order D_s-optimal designs for the λ-th order models are derived for 1 ≤ λ ≤ d ≤ 4. Efficiencies of these designs with respect to the λ-th order D-optimal designs are obtained. The effects of estimating addtional parameters due to an m-th order model (d ≥ m >>λ) on the efficiencies are investigated.     

On the construction of m-associate pbib designs II

Some series of m-associate triangular PBIB designs have been constructed. A table of now three associate designs in the range b, v ≦ 100; r, k ≦ 10 with their average efficiencies has been given. These designs with (v, b, r, k) are new in the sense that the existence of two associate PBIB designs (e.f. Clatworthy (1973), John & Turner (1977), Dey (1978)) with these parameters are not known. The constructions presented herein also yield partially balanced weighing designs, nested PBIB designs and PBIB designs for m11111 response exoeriments.     

On d- and e- minimax optimal designs for estimating the axial slopes of a second-order response surface over hypercubic regions

Design of experiments for estimating the slopes of a response surface is considered. Design criteria analogous to the traditional ones but based upon the variance-covariance matrix of the estimated slopes along factor axes are proposed. Optimal designs under the proposed criteria are derived for second-order polynomial regression over hypercubic regions. Best de¬signs within some commonly used classes of designs are also obtained and their efficiencies are investigated.     

Tables of Cyclic Incomplete Block Designs: r=k

Initial blocks and efficiencies are given for cyclic incomplete block designs in the range t= 10(1)60 and r=k= 3(1)10. The designs have been selected by search procedures using optimality criteria which maximize the efficiency factor.     

Some as-optimal designs and their a-efficiencies

For polynomial regression over spherical regions, the d-th order As-optimal designs for γ-th order models are derived for 4 ≥ d > γ≥l. Efficiencies of these designs with respect to the γ-th order A-optimal designs are obtained. Furthermore, the effects of estimating intermediate m-th order models on these efficiencies are examined for d > m > γ     

Minimax Designs for the Stability of Slope Estimation on Second-order Response Surfaces

In this paper, designs for the stability of the slope estimation on a second-order response surface are considered. Minimization of the point dispersion measure, which is maximized over all points in the region of interest is taken as the optimality criterion, and the minimax properties in some class of designs are derived in spherical and cubic regions of interest. We study the efficiencies of the minimax designs relative to other optimal designs with various criteria.     

Approximate E-optimal designs for the model of spring balance weighing with a constant bias

The present paper analyzes the linear regression model with a nonzero intercept term on the vertices of a d-dimensional unit cube. This setting may be interpreted as a model of weighing d objects on a spring balance with a constant bias. We give analytic formulas for E-optimal designs, as well as their minimal efficiencies under the class of all orthogonally invariant optimality criteria, proving the criterion-robustness of the E-optimal designs. We also discuss the D- and A-optimal designs for this model.     

A-Optimality Standardized Through the Coefficient of Variation

Many of the usual criteria for optimal experimental design do not take into account the different scale of the variance of the parameters. Dette (1997 Dette , H. ( 1997 ). Designing experiments with respect to “standardized” optimality criteria . J. J. Roy. Statist. Soc. Ser. B Statist. Methodol. 59 ( 1 ): 97 – 110 .[Crossref] , [Google Scholar]) provided a standardization which leads to designs with similar efficiencies for all of the parameters.

In this article, a new way of standardization through the coefficient of variation is given. This leads to designs useful when one of the parameters is expected to be very small. Thus, this criterion may be used if there is special interest in maximizing the power of some parameter tests. Locally standardized through the coefficient of variation A-optimal designs are computed for simple linear and quadratic regression.     

Optimal discrimination designs for exponential regression models

We investigate optimal designs for discriminating between exponential regression models of different complexity, which are widely used in the biological sciences; see, e.g., Landaw [1995. Robust sampling designs for compartmental models under large prior eigenvalue uncertainties. Math. Comput. Biomed. Appl. 181–187] or Gibaldi and Perrier [1982. Pharmacokinetics. Marcel Dekker, New York]. We discuss different approaches for the construction of appropriate optimality criteria, and find sharper upper bounds on the number of support points of locally optimal discrimination designs than those given by Caratheodory's Theorem. These results greatly facilitate the numerical construction of optimal designs. Various examples of optimal designs are then presented and compared to different other designs. Moreover, to protect the experiment against misspecifications of the nonlinear model parameters, we adapt the design criteria such that the resulting designs are robust with respect to such misspecifications and, again, provide several examples, which demonstrate the advantages of our approach.     

Optimizing the test power for a radiation retention model in the human body

The model that describes the retention in lungs of radioisotope particles is studied in this paper, considering the situation of an accident in facilities that handle radioactive materials. Optimal times to make the bioassays are computed for D‐ and c‐optimality, and efficiencies for the computed designs are provided and compared. Moreover, the test power is checked by means of simulations and replications. After that the inverse of the Fisher information matrix is compared to an estimation of the covariance matrix of the parameters. Finally, a study taking into consideration the randomness of the designs space is performed. Copyright © 2009 John Wiley & Sons, Ltd.     

Optimal design for the proportional odds model

The authors construct locally optimal designs for the proportional odds model for ordinal data. While they investigate the standard D‐optimal design, they also investigate optimality criteria for the simultaneous estimation of multiple quantiles, namely D_A ‐optimality and the omnibus criterion. The design of experiments for the simultaneous estimation of multiple quantiles is important in both toxic and effective dose studies in medicine. As with c‐optimality in the binary response problem, the authors find that there are distinct phase changes when exploring extreme quantiles that require additional design points. The authors also investigate relative efficiencies of the criteria.     

Optimal designs based on exact confidence regions for parameter estimation of a nonlinear regression model

This paper is concerned with the proposal of optimality criteria, referred to as X  - and X^′$X^{\prime }$-optimality criteria, and the construction of X  - and X^′$X^{\prime }$-optimal designs, for nonlinear regression models. These optimal designs aim at improving the estimation of parameters of this class of models. The principle of these criteria is the minimization, with respect to the design, of the expected volume of a particular exact parametric confidence region. In this paper we give detailed definitions, properties, and computation methods of X  - and X^′$X^{\prime }$-optimal designs. We also compare these designs with the classic local D-optimal designs, with regard to robustness and efficiency, for two very well-known academic models (Box–Lucas and Michaelis–Menten models).     

Cost‐efficient higher‐order crossover designs for two‐treatment clinical trials

Higher‐order crossover designs have drawn considerable attention in clinical trials, because of their ability to test direct treatment effects in the presence of carry‐over effects. The important question, when applying higher‐order crossover designs in practice, is how to choose a design with both statistical and cost efficiencies from various alternatives. In this paper, we propose a general cost function and compare five statistically optimal or near‐optimal designs with this cost function for a two‐treatment study under different carry‐over models. Based on our study, to achieve both statistical and cost efficiencies, a four‐period, four‐sequence crossover design is generally recommended under the simple carry‐over or no carry‐over models, and a three‐period, two‐sequence crossover design is generally recommended under the steady‐state carry‐over models. Copyright © 2005 John Wiley & Sons, Ltd.     

Nearly optimal orthogonally blocked desings for a quadratic mixture model with q components

In experiments with mixtures involving process variables, orthogonal block designs may be used to allow estimation of the parameters of the mixture components independently of estimation of the parameters of the process variables. In the class of orthogonally blocked designs based on pairs of suitably chosen Latin squares, the optimal designs consist primarily of binary blends of the mixture components, regardless of how many ingredients are available for the mixture. This paper considers ways of modifying these optimal designs so that some or all of the runs used in the experiment include a minimum proportion of each mixture ingredient. The designs considered are nearly optimal in the sense that the experimental points are chosen to follow ridges of maxima in the optimality criteria. Specific designs are discussed for mixtures involving three and four components and distinctions are identified for different designs with the same optimality properties. The ideas presented for these specific designs are readily extended to mixtures with q>4 components.     

Optimal designs for experiments with mixtures: a survey

This is a survey article on known results about analytic solutions and numerical solutions of optimal designs for various regression models for experiments with mixtures. The regression models include polynomial models, models containing homogeneous functions, models containing inverse terms and ratios, log contrast models, models with quantitative variables, and mod els containing the amount of mixture, Optimality criteria considered include D-, A-, E-,φ_p- and I_λ-Optimalities. Uniform design and uniform optimal design for mixture components, and efficiencies of the {q,2} simplex-controid design are briefly discussed.     

Optimal designs for multivariate logistic mixed models with longitudinal data

This paper considers the optimal design problem for multivariate mixed-effects logistic models with longitudinal data. A decomposition method of the binary outcome and the penalized quasi-likelihood are used to obtain the information matrix. The D-optimality criterion based on the approximate information matrix is minimized under different cost constraints. The results show that the autocorrelation coefficient plays a significant role in the design. To overcome the dependence of the D-optimal designs on the unknown fixed-effects parameters, the Bayesian D-optimality criterion is proposed. The relative efficiencies of designs reveal that both the cost ratio and autocorrelation coefficient play an important role in the optimal designs.     

Response surface design evaluation and comparison

Designing an experiment to fit a response surface model typically involves selecting among several candidate designs. There are often many competing criteria that could be considered in selecting the design, and practitioners are typically forced to make trade-offs between these objectives when choosing the final design. Traditional alphabetic optimality criteria are often used in evaluating and comparing competing designs. These optimality criteria are single-number summaries for quality properties of the design such as the precision with which the model parameters are estimated or the uncertainty associated with prediction. Other important considerations include the robustness of the design to model misspecification and potential problems arising from spurious or missing data. Several qualitative and quantitative properties of good response surface designs are discussed, and some of their important trade-offs are considered. Graphical methods for evaluating design performance for several important response surface problems are discussed and we show how these techniques can be used to compare competing designs. These graphical methods are generally superior to the simplistic summaries of alphabetic optimality criteria. Several special cases are considered, including robust parameter designs, split-plot designs, mixture experiment designs, and designs for generalized linear models.     

Comparing search and estimation performances of designs based on a compound criterion

Since the introduction of the search design by Srivastava [Designs for searching non-negligible effects. In: Srivastava, editor. A survey of statistical design and linear models. Amsterdam: North-Holland, Elsevier; 1975. p. 507–519], construction of such designs has been considered by many researchers. The efficient performances of constructed search designs in terms of parameter estimation and search ability of parameters have also been investigated by several authors. They have proposed suitable optimality measures such as DD- and AD-optimality for estimation in the early stage of search design construction. Moreover, since 1990s, some criteria have been developed to evaluate search performance of a design. Although these criteria are useful none of them is able to evaluate both estimation and search efficiency of a design simultaneously. In this paper, we propose dual-task criteria to deal with searching and estimating performances of search designs. These compound criteria are weighted multiplication of estimation and search suitable criteria. They will be used for design comparison and the results will be presented.     

Relationships of optimality for individual factors of a design

The optimality of two-factor experimental designs is studied in the dual senses of estimating contrasts in the parameters for each of the factors. The outline of comparison employed allows one to judge the performance of different designs for estimating contrasts of one set of parameters directly with the performance of the complementary set without going through a common intermediary step of considering all the parameters. The results hold for a wide class of optimality criteria (not merely D-, A- and E-optimality), which must satisfy a functional equation obtained in connection with our method. Also we investigate the optimality of row–column designs which satisfy an ‘adjusted orthogonality’ condition. Our point of departure is the paper by Shah, Raghavarao and Khatri (1976) and that of Mitchell and John (1977).