Bayes A-optimal designs for comparing test treatments with a control

The problem of comparing v test treatments simultaneously with a control treatment when k, v ⩾ 3 is considered. Following the work of Majumdar (1992), we use exact design theory to derive Bayes A-optimal block designs and optimal Г-minimax designs for a more general prior assumption for the one-way elimination of heterogeneity model. Examples of robust optimal designs, highly efficient designs, and the comparisons of the approximate optimal designs that are derived by our methods and by some other existing rounding-off schemes when using Owen's procedure are also provided.     

A new characterization of Elfving's method for high dimensional computation

We give a new characterization of Elfving's (1952) method for computing c-optimal designs in k dimensions which gives explicit formulae for the k unknown optimal weights and k unknown signs in Elfving's characterization. This eliminates the need to search over these parameters to compute c-optimal designs, and thus reduces the computational burden from solving a family of optimization problems to solving a single optimization problem for the optimal finite support set. We give two illustrative examples: a high dimensional polynomial regression model and a logistic regression model, the latter showing that the method can be used for locally optimal designs in nonlinear models as well.     

Optimal block designs comparing treatments with a control when the errors are correlated

The efficient design of experiments for comparing a control with v new treatments when the data are dependent is investigated. We concentrate on generalized least-squares estimation for a known covariance structure. We consider block sizes k equal to 3 or 4 and approximate designs. This method may lead to exact optimal designs for some v, b, k, but usually will only indicate the structure of an efficient design for any particular v, b, k, and yield an efficiency bound, usually unattainable. The bound and the structure can then be used to investigate efficient finite designs.     

Optimal selection and ordering of columns in supersaturated designs

Two methods to select columns for assigning factors to work on supersaturated designs are proposed. The focus of interest is the degree of non-orthogonality between the selected columns. One method is the exhaustive enumeration of selections of p columns from all k columns to find the exact optimality, while the other is intended to find an approximate solution by applying techniques used in the corresponding analysis, aiming for ease of use as well as a reduction in the large computing time required for large k with the first method. Numerical illustrations for several typical design matrices reveal that the resulting “approximately” optimal assignments of factors to their columns are exactly optimal for any p. Ordering the columns in E(s²)-optimal designs results in promising new findings including a large number of E(s²)-optimal designs.     

Some further results on the MV-optimality of block designs for comparing test treatments to a standard treatment

In this paper we further consider the problem of determining optimal block designs which can be used to compare v test treatments to a standard treatment in experimental situations where the available experimental units are to be arranged in b blocks of size k. A design is said to be MV-optimal in such an experimental setting it is minimizes the maximal variance with which treatment differences involving the standard treatment are estimated. In this paper we derive some further sufficient conditions for a design to be MV-optimal in an experimental situation such as described above.     

Balanced and partially balanced incomplete block designs with autocorrelation errors

The paper aims to find variance balanced and variance partially balanced incomplete block designs when observations within blocks are autocorrelated and we call them BIBAC and PBIBAC designs. Orthogonal arrays of type I and type II when used as BIBAC designs have smaller average variance of elementary contrasts of treatment effects compared to the corresponding Balanced Incomplete Block (BIB) designs with homoscedastic, uncorrelated errors. The relative efficiency of BIB designs compared to BIBAC designs depends on the block size k and the autocorrelation ρ and is independent of the number of treatments. Further this relative efficiency increases with increasing k. Partially balanced incomplete block designs with autocorrelated errors are introduced using partially balanced incomplete block designs and orthogonal arrays of type I and type II.     

On bounds for the efficiency of block designs for comparing test treatments with a control

In this paper we study the class of augmented balanced incomplete block designs, which are used for comparing a control treatment with a set of test treatments. Under the A- criterion we establish a condition that enables us to determine the most efficient augmented design and we suggest some methods to compute a lower bound for the efficiency of these designs. For 3≤k≤10, v≥k, we list the parameters of the most efficient designs with a lower bound for their efficiency or, if known, mention their optimality.     

Optimal k-circulant supersaturated designs

Optimal k-circulant supersaturated designs have been constructed in literature using computer intensive methods. A systematic method of construction for multi-level experiments based on balanced incomplete block designs is presented in this paper. The method is also applicable to two-level experiments. Illustrative examples are also given.     

Some sufficient conditions for the type 1 optimality of block designs

In this paper, we investigate the problem of determining block designs which are optimal under type 1 optimality criteria within various classes of designs having υ treatments arranged in b blocks of size k. The solutions to two optimization problems are given which are related to a general result obtained by Cheng (1978) and which are useful in this investigation. As one application of the solutions obtained, the definition of a regular graph design given in Mitchell and John (1977) is extended to that of a semi-regular graph design and some sufficient conditions are derived for the existence of a semi-regular graph design which is optimal under a given type 1 criterion. A result is also given which shows how the sufficient conditions derived can be used to establish the optimality under a specific type 1 criterion of some particular types of semi- regular graph designs having both equal and unequal numbers of replicates. Finally,some sufficient conditions are obtained for the dual of an A- or D-optimal design to be A- or D-optimal within an appropriate class of dual designs.     

Construction of Efficient Multi-Level k-Circulant Supersaturated Designs

This article proposes an algorithm to construct efficient balanced multi-level k-circulant supersaturated designs with m factors and n runs. The algorithm generates efficient balanced multi-level k-circulant supersaturated designs very fast. Using the proposed algorithm many balanced multi-level supersaturated designs are constructed and cataloged. A list of many optimal and near optimal, multi-level supersaturated designs is also provided for m ≤ 60 and number of levels (q) ≤10. The algorithm can be used to generate two-level k-circulant supersaturated designs also and some large optimal two-level supersaturated designs are presented. An upper bound to the number of factors in a balanced multi-level supersaturated design such that no two columns are fully aliased is also provided.     

On the determination and construction of optimal designs for comparing a set of test treatments with a set of controls in the presence of a linear trend

In this paper we consider the problem of constructing optimal designs for experimental situations where c controls are to be compared to t test treatments and the treatments are to be applied to experimental units occurring in a linear array and where there may be an unknown linear trend. Methods are given for determining and constructing optimal designs for such situations.     

Generalized neighbor designs with block size 3

A generalized neighbor design relaxes the equality condition on the number of times two treatments as neighbors in the design. In this article, we have considered the construction of some classes of generalized neighbor designs with block size k=3 by using the method of cyclic shifts. The distinguishing feature of this construction method is that the properties of a design can easily be obtained from the sets of shifts instead of constructing the actual blocks of the design. A catalog of generalized neighbor designs with block size k=3 is compiled for v∈{5,6,…,18} treatments and for different replications. We provide the reader with a simpler method of construction, and in general the catalog that gives an open choice to the experimenter for selecting any class of neighbor designs.     

Some MV-optimal group divisible type block designs for comparing a set of test treatments with a set of standard treatments

In this paper, we consider experimental situations in which it is desired to optimally compare t-test treatments to s standard treatments using a block design in which the experimental units are arranged in b blocks of size k. A method is given for generating an MV-optimal block design for such situations and sufficient conditions are derived which can often be used to establish the MV-optimality of reinforced group divisible designs which are often obtained using the process given.     

Saturated designs for multivariate cubic regression

This paper deals with the problem of finding saturated designs for multivariate cubic regression on a cube which are nearly D-optimal. A finite class of designs is presented for the k dimensional cube having the property that the sequence of the best designs in this class for each k is asymptotically efficient as k increases. A method for constructing good designs in this class is discussed and the construction is carried out for 1?k?8. These numerical results are presented in the last section of the paper.     

On the determination and construction of E-optimal block designs in the presence of linear trends

In this paper we consider experimental situations in which v treatments are to be applied to experimental units arranged in b blocks of size k = 3 and where there may be unknown or uncontrollable linear trends (possibly different) within blocks. Methods are given here for determining and constructing E-optimal designs for such situations.     

A-Optimal and MV-Optimal Incomplete Block Designs for Comparing Successive Treatments

Consider an incomplete block experiment in which observations are taken from t treatments using an incomplete block design with b blocks of size k < t. Suppose the interest is in estimating the differences of effects of successive treatments. This may occur, for example, if the treatments are different dosages or concentrations of a compound. This article presents A-optimal and MV-optimal incomplete block designs for estimating the the differences of successive treatment effects. Tables of optimal designs are given for k < t ≤ 5 with b ≤ 40.     

A survey of nested designs

A nest with parameters (r,k,λ)→(r′,k′,λ′) is a BIBD on (b,v,r,k,λ) where each block has a distinguished sublock of cardinality k, the sublocks forming a (b,v,r,k,λ)-design.These designs are ‘nested’ in the sense of W.T. Federer (1972), who recommended the use of these designs for the sequential addition of periods in marketing experiments in order to retain Youden design properties as rows are added. Note that for a Youden design, the b columns and v treatments are in an SBIBD arrangement with parameters v=b, k=r, and λ.     

Extension and necessity of Cheng and Wu conditions

Repeated Measurement Designs, with two treatments, n (experimental) units and p periods are examined. The model examined is with uncorrelated observations following a continuous distribution with constant variance and the parameters of interest are (i) the difference of direct effects and (ii) the difference of residual effects. In this paper (a) the difference of Universal optimality and Φ-optimality is clarified and (b) the sufficient conditions of Cheng and Wu (1980) are extended to include the case n=2 mod 4, p even, (c) also it is shown that these conditions are also necessary for Φ-optimality for estimating direct as well as residual effects, and (d) a method is proposed to construct Φ-optimal designs and examples are given when n even and p=3, n=0 mod 4 and p=4, n=2 mod 4 and p=4. In the last case the estimated parameters in the optimal design are correlated.     

The A-optimal non-saturated weighing designs for n = 15 observations

The problem of constructing A-optimal weighing and first order fractional factorial designs for n ≡ 3 mod 4 observations is considered. The non-existence of the weighing design matrices for n = 15 observations and k = 13, 14 factors, for which the corresponding information matrices have inverses with minimum trace, is proved. These designs are the first non-saturated cases (k < n) in which the unattainability of Sathe and Shenoy's (1989) lower bound on A-optimality is shown. Using an algorithm proposed in Farmakis (1991) we construct 15 × k (+1, −1)-matrices for k = 13, 14 and we prove their A-optimality using the improved (higher) lower bounds on A-optimality established by Chadjiconstantinidis and Kounias (1994). Also the A-optimal designs for n = 15, k ⩽ 12 are given.     

Optimal designs for response functions with a downturn

In many toxicological assays, interactions between primary and secondary effects may cause a downturn in mean responses at high doses. In this situation, the typical monotonicity assumption is invalid and may be quite misleading. Prior literature addresses the analysis of response functions with a downturn, but so far as we know, this paper initiates the study of experimental design for this situation. A growth model is combined with a death model to allow for the downturn in mean doses. Several different objective functions are studied. When the number of treatments equals the number of parameters, Fisher information is found to be independent of the model of the treatment means and on the magnitudes of the treatments. In general, A- and D_A-optimal weights for estimating adjacent mean differences are found analytically for a simple model and numerically for a biologically motivated model. Results on c-optimality are also obtained for estimating the peak dose and the EC₅₀ (the treatment with response half way between the control and the peak response on the increasing portion of the response function). Finally, when interest lies only in the increasing portion of the response function, we propose composite D-optimal designs.