Optimal U-type design for Bayesian nonparametric multiresponse prediction

This paper presents an extension of the work of Yue and Chatterjee (2010) about U-type designs for Bayesian nonparametric response prediction. We consider nonparametric Bayesian regression model with p responses. We use U-type designs with n runs, m factors and q levels for the nonparametric multiresponse prediction based on the asymptotic Bayesian criterion. A lower bound for the proposed criterion is established, and some optimal and nearly optimal designs for the illustrative models are given.     

Approximate E-optimal designs for the model of spring balance weighing with a constant bias

The present paper analyzes the linear regression model with a nonzero intercept term on the vertices of a d-dimensional unit cube. This setting may be interpreted as a model of weighing d objects on a spring balance with a constant bias. We give analytic formulas for E-optimal designs, as well as their minimal efficiencies under the class of all orthogonally invariant optimality criteria, proving the criterion-robustness of the E-optimal designs. We also discuss the D- and A-optimal designs for this model.     

Screening designs for model discrimination

We introduce new criteria for model discrimination and use these and existing criteria to evaluate standard orthogonal designs. We show that the capability of orthogonal designs for model discrimination is surprisingly varied. In fact, for specified sample sizes, number of factors, and model spaces, many orthogonal designs are not model discriminating by the definition given in this paper, while others in the same class of orthogonal designs are. We also use these criteria to construct optimal two-level model-discriminating designs for screening experiments. The efficacy of these designs is studied, both in terms of estimation efficiency and discrimination success. Simulation studies indicate that the constructed designs result in substantively higher likelihoods of identifying the correct model.     

Statistical properties of Rechtschaffner designs

Rechtschaffner designs are saturated designs of resolution V   in which main effects and two-factor interactions are estimable if three-factor and higher order interactions are negligible. Statistical properties of Rechtschaffner designs are studied in this paper. Best linear unbiased estimators of main effects and two-factor interactions are given explicitly and asymptotic properties of correlations between these estimators are studied as well. It is shown that designs recommended by Rechtschaffner [1967. Saturated fractions of 2ⁿ$2^n$ and 3ⁿ$3^n$ factorial designs, Technometrics 9, 569–576] are not only A-optimal but also D-optimal. Comparisons of Rechtschaffner designs with other A- and D-optimal designs of resolution V are also discussed.     

On D-optimal robust second order slope-rotatable designs

Das and Park (2006) introduced slope-rotatable designs overall directions for correlated observations which is known as A-optimal robust slope-rotatable designs. This article focuses D-optimal slope-rotatable designs for second-order response surface model with correlated observations. It has been established that robust second-order rotatable designs are also D-optimal robust slope-rotatable designs. A class of D-optimal robust second-order slope-rotatable designs has been derived for special correlation structures of errors.     

Model-robust supersaturated and partially supersaturated designs

Supersaturated designs are an increasingly popular tool for screening factors in the presence of effect sparsity. The advantage of this class of designs over resolution III factorial designs or Plackett–Burman designs is that n, the number of runs, can be substantially smaller than the number of factors, m. A limitation associated with most supersaturated designs produced thus far is that the capability of these designs for estimating g active effects has not been discussed. In addition to exploring this capability, we develop a new class of model-robust supersaturated designs that, for a given n and m, maximizes the number g   of active effects that can be estimated simultaneously. The capabilities of model-robust supersaturated designs for model discrimination are assessed using a model-discrimination criterion, the subspace angle. Finally, we introduce the class of partially supersaturated designs, intended for use when we require a specific subset of _m1$m_1$ core factors to be estimable, and the sparsity of effects principle applies to the remaining (m-_m1$m-m_1$) factors.     

Optimal selection and ordering of columns in supersaturated designs

Two methods to select columns for assigning factors to work on supersaturated designs are proposed. The focus of interest is the degree of non-orthogonality between the selected columns. One method is the exhaustive enumeration of selections of p columns from all k columns to find the exact optimality, while the other is intended to find an approximate solution by applying techniques used in the corresponding analysis, aiming for ease of use as well as a reduction in the large computing time required for large k with the first method. Numerical illustrations for several typical design matrices reveal that the resulting “approximately” optimal assignments of factors to their columns are exactly optimal for any p. Ordering the columns in E(s²)-optimal designs results in promising new findings including a large number of E(s²)-optimal designs.     

Row-column designs for comparing treatments with a control

This paper considers the problem of the design and analysis of experiments for comparing several treatments with a control when heterogeneity is to be eliminated in two directions. A class of row-column designs which are balanced for treatment vs. control comparisons (referred to as the balanced treatment vs. control row-column or BTCRC designs) is proposed. These designs are analogs of the so-called BTIB designs proposed by Bechhofer and Tamhane (Technometrics 23 (1981) 45–57) for eliminating heterogeneity in one direction. Some methods of analysis and construction of these designs are given. A measure of efficiency of BTCRC designs in terms of the A-optimality criterion is derived and illustrated by several examples.     

Minimum aberration blocking schemes for 128-run designs

Several criteria have been proposed for ranking blocked fractional factorial designs. For large fractional factorial designs, the most appropriate minimum aberration criterion was one proposed by Cheng and Wu (2002). We justify this assertion and propose a novel construction method to overcome the computational challenge encountered in large fractional factorial designs. Tables of minimum aberration blocked designs are presented for N=128 runs and n=8–64 factors.     

Three-factor symmetrical balanced designs with full efficiency for main effects

Some methods for constructing balanced design for 3-factor symmetrical factorial experiments in which all the main effects are completely unconfounded by using balanced arrays and BIB designs are proposed. The method is flexible in terms of selecting block size.     

On the E-optimality of complete block designs under a mixed interference model

In experiments in which the response to a treatment can be affected by other treatments, the interference model with neighbor effects is usually used. It is known that circular neighbor balanced designs (CNBDs) are universally optimal under such a model if the neighbor effects are fixed (Druilhet, 1999) or random (4 and 7). However, such designs cannot exist for every combination of design parameters. In the class of block designs with the same number of treatments as experimental units per block, a CNBD cannot exist if the number of blocks, b  , is equal to p(t−1)±1$p(t-1)\pm 1$, where p is a positive integer and t is the number of treatments. Filipiak et al. (2008) gave the structure of the left-neighboring matrix of E-optimal complete block designs with p  =1 under the model with fixed neighbor effects. The purpose of this paper is to generalize E-optimality results for designs with p∈N$p\in \mathbb{N}$ assuming random neighbor effects.     

Hypercubic designs and applications

In this paper we develop relatively easy methods for constructing hypercubic designs from symmetrical factorial experiments for t=v ^m treatments with v=2, 3. The proposed methods are easy to use and are flexible in terms of choice of possible block sizes.     

MBMUDs: a combinatorial extension of BIBDs showing good optimality behaviour

The construction of a balanced incomplete block design (BIBD) is formulated in terms of combinatorial optimization by defining a cost function that reaches its lower bound on all and only those configurations corresponding to a BIBD. This cost function is a linear combination of distribution measures for each of the properties of a block design (number of plots, uniformity of rows, uniformity of columns, and balance). The approach generalizes naturally to a super-class BIBDs, which we call maximally balanced maximally uniform designs (MBMUDs), that allow two consecutive values for their design parameters [r,r+1;k,k+1;λ,λ+1]. In terms of combinatorial balance, MBMUDs are the closest possible approximation to BIBDs for all experimental settings where no set of admissible parameters exists. Thus, other design classes previously proposed with the same approximation aim—such as RDGs, SRDGs and NBIBDs of type I—can be viewed as particular cases of MBMUDs. Interestingly, experimental results show that the proposed combinatorial cost function has a monotonic relation with A- and D-statistical optimality in the space of designs with uniform rows and columns, while its computational cost is much lower.     

Effect of choice complexity on design efficiency in conjoint choice experiments

Conjoint choice experiments have become a powerful tool to explore individual preferences. The consistency of respondents' choices depends on the choice complexity. For example, it is easier to make a choice between two alternatives with few attributes than between five alternatives with several attributes. In the latter case it will be much harder to choose the preferred alternative which is reflected in a higher response error. Several authors have dealt with this choice complexity in the estimation stage but very little attention has been paid to set up designs that take this complexity into account. The core issue of this paper is to find out whether it is worthwhile to take this complexity into account in the design stage. We construct efficient semi-Bayesian D-optimal designs for the heteroscedastic conditional logit model which is used to model the across respondent variability that occurs due to the choice complexity. The degree of complexity is measured by the entropy, as suggested by Swait and Adamowicz (2001). The proposed designs are compared with a semi-Bayesian D-optimal design constructed without taking the complexity into account. The simulation study shows that it is much better to take the choice complexity into account when constructing conjoint choice experiments.     

An algorithm for calculating D-optimal designs for polynomial regression through a fixed point

Optimal designs are required to make efficient statistical experiments. By using canonical moments, in 1980, Studden found D_s-optimal designs for polynomial regression models. On the other hand, integrable systems are dynamical systems whose solutions can be written down concretely. In this paper, polynomial regression models through a fixed point are discussed. In order to calculate D-optimal designs for these models, a useful relationship between canonical moments and discrete integrable systems is introduced. By using canonical moments and discrete integrable systems, a new algorithm for calculating D-optimal designs for these models is proposed.     

An optimal response adaptive biased coin design with k heteroscedastic treatments

For comparing treatments in clinical trials, Atkinson (1982) introduced optimal biased coins for balancing patients across treatment assignments by using D-optimality under the assumption of homoscedastic responses of different treatments. However, this assumption can be violated in many real applications. In this paper, we relax the homoscedasticity assumption in the k treatments setting with k>2. A general family of optimal response adaptive biased coin designs are proposed following Atkinson's procedure. Asymptotic properties of the proposed designs are obtained. Some advantages of the proposed design are discussed.     

An extension of Banerjee and Rahim model in economic and economic statistical designs for multivariate quality characteristics under Burr XII distribution

The design parameters of the economic and economic statistical designs of control charts depend on the distribution of process failure mechanism or shock model. So far, only a small number of failure distributions, such as exponential, gamma, and Weibull with fixed or increasing hazard rates, have been used as a shock model in the economic and economic statistical designs of the Hotelling T² control charts. Due to both theoretical and practical aspects, the lifetime of the process under study may not follow a distribution with fixed or increasing hazard rate. A proper alternative for this situation may be the Burr distribution, in which the hazard rate can be fixed, increasing, decreasing, single mode, or even U-shaped. In this research article, economic and economic statistical designs of the Hotelling T² control charts under the Burr XII shock models under two uniform and non uniform sampling schemes were proposed, constructed, and compared. The obtained design models were implemented by a numerical example, and a sensitivity analysis was conducted to evaluate the effect of changing parameters of shock model distribution on the optimum values of the proposed design models. The results showed that first the proposed designs under non uniform sampling scheme perform better and second the optimum values of the designs are not significantly sensitive to changing of the Burr XII distribution parameters. We showed that the obtained design models are also true for the beta Burr XII shock model.     

The analytic construction of D-optimal designs for the two-variable binary logistic regression model without interaction

Candidate locally D-optimal designs for the binary two-variable logistic model with no interaction, which comprise 3 and 4 support points lying in the first quadrant of the two-dimensional Euclidean space, were introduced by Haines et al. (D-optimal designs for logistic regression in two variables. In: Lopez-Fidalgo J, Rodrigez-Diaz JM, Torsney B, editors. MODA8 – advances in model-oriented designs and analysis. Heidelberg: Physica-Verlag; 2007. p. 91–98). The authors proved algebraically the global D-optimality of the 3-point design for the special case in which the intercept parameter is equal to?1.5434. However for other selected values of the intercept parameter, the global D-optimality of the proposed 3- and 4-point designs was only demonstrated numerically. In this paper, we provide analytical proofs of the D-optimality of these 3- and 4-point designs for all negative and zero intercept parameters of the binary two-variable logistic model with no interaction. The results are extended to the construction of D-optimal designs on a rectangular design space and illustrated by means of two examples of which one is a real example taken from the literature.     

Optimal block designs comparing treatments with a control when the errors are correlated

The efficient design of experiments for comparing a control with v new treatments when the data are dependent is investigated. We concentrate on generalized least-squares estimation for a known covariance structure. We consider block sizes k equal to 3 or 4 and approximate designs. This method may lead to exact optimal designs for some v, b, k, but usually will only indicate the structure of an efficient design for any particular v, b, k, and yield an efficiency bound, usually unattainable. The bound and the structure can then be used to investigate efficient finite designs.     

Analysis of cross-over designs via growth curve models

Models for repeated measures cross-over designs are defined in terms of growth curve models. In the paper two specific cross-over designs, called the AB:BA and ABAB:BABA design, are studied. The maximum-likelihood (ML) estimators for the parameters are derived by utilizing the theory for growth curve models. A model with a structured dispersion matrix is defined for the AB:BA design, and a specific linear transformation is used to derive estimators in a convenient way. To illustrate numerically, ML estimates are calculated for an ABAB:BABA study.