Optimal designing of an SkSP-R double sampling plan

In this article, we propose a method of planning and determining the optimum parameters of a SkSP-R skip-lot sampling plan by using the attribute double sampling plan as the reference plan. The SkSP-R plan is a new type of skip-lot sampling plan which has a provision for re-inspecting the submitted lots. The optimal plan parameters of the suggested sampling plan are estimated with the target that the average sample number be minimized and satisfying both the specified producer's as well as the consumer's risks simultaneously. In order to obtain the optimum parameters, tables are also built for different combinations of the acceptable quality level and the limiting quality level in conjunctions with different producer's and consumer's risks. An illustrative example is provided for the implementation of the suggested plan. The advantages of the suggested plan over the existing conventional sampling plans and other existing skip-lot sampling plans are also described.     

Optimal designing of skip-lot sampling plan of type SkSP-2 with group acceptance sampling plan as reference plan under Burr-type XII distribution

In this paper, skip-lot sampling plan of type SkSP-2 with group acceptance sampling plans is proposed when the lifetime of the product follows the Burr-type XII distributions. The optimal parameters of the proposed plan are determined when two points on operating characteristics curve namely acceptable quality level and limiting quality level and the number of testers are specified. We also considered the Burr-type XII distribution to find the plan parameters. Several tables are given for practical use. We compare the results of proposed plan with the existing plans. Results are explained using real-world examples.     

Designing of a mixed-chain sampling plan based on the process capability index with chain sampling as the attributes plan

In this article, we propose a new mixed chain sampling plan based on the process capability index C_pk, where the quality characteristic of interest having double specification limits and follows the normal distribution with unknown mean and variance. In the proposed mixed plan, the chain sampling inspection plan is used for the inspection of attribute quality characteristics. The advantages of this proposed mixed sampling plan are also discussed. Tables are constructed to determine the optimal parameters for practical applications by formulating the problem as a non linear programming in which the objective function to be minimized is the average sample number and the constraints are related to lot acceptance probabilities at acceptable quality level and limiting quality level under the operating characteristic curve. The practical application of the proposed mixed sampling plan is explained with an illustrative example. Comparison of the proposed sampling plan is also made with other existing sampling plans.     

Designing optimal double-sampling plan based on process capability index

Process capability analysis is applied to monitor the process quality. Process capability can be quantified by process capability index. These indices have wide application in quality control methods and acceptance sampling plans. In this paper, we introduce a double-sampling plan based on process capability index. In this type of scheme, under a decision rule and with the specified rejection and acceptance numbers, the second sample is selected and the decision of rejection or acceptance is made based on the information obtained from two samples. The purpose of this scheme is to reduce the average sample number in order to reduce the time and cost of sampling. A comparison study has been conducted in order to evaluate the performance of proposed method in comparison with classical single sampling plans.     

A new mixed chain sampling plan based on the process capability index for product acceptance

This article proposes a new mixed chain sampling plan based on the process capability index C_pk, where the quality characteristic of interest follows the normal distribution with unknown mean and variance. The advantages of this proposed mixed sampling plan are also discussed. Tables are constructed to determine the optimal parameters for practical applications. In order to construct the tables, the problem is formulated as a nonlinear programming where the objective function to be minimized is the average sample number and the constraints are related to lot acceptance probabilities at acceptable quality level and limiting quality level under the operating characteristic curve. The practical application of the proposed mixed sampling plan is explained with an illustrative example. Comparison of the proposed sampling plan is also made with other existing sampling plans.     

Procedure for the selection of CSP-M one level skip-lot sampling inspection plans that have a single-sampling plan with acceptance number zero as the reference plan

This paper presents a procedure for the selection of CSP-M one-level skip-lot sampling plans, designated as CSP-MSkSP, that have a single-sampling plan with acceptance number zero as the reference plan. The parameters of the plan are determined when two points on the operating characteristic curve are specified, the two points being (p1,) and (p2,), where p1 is the acceptable quality level, is the producer's risk, p2 is the limiting quality level and is the consumer's risk.     

Optimal designing of a new mixed variable lot-size chain sampling plan based on the process capability index

In this paper, a new mixed sampling plan based on the process capability index (PCI) C_pk is proposed and the resultant plan is called mixed variable lot-size chain sampling plan (ChSP). The proposed mixed plan comprises of both attribute and variables inspections. The variable lot-size sampling plan can be used for inspection of attribute quality characteristics and for the inspection of measurable quality characteristics, the variables ChSP based on PCI will be used. We have considered both symmetric and asymmetric fraction non conforming cases for the variables ChSP. Tables are developed for determining the optimal parameters of the proposed mixed plan based on two points on the operating characteristic (OC) approach. In order to construct the tables, the problem is formulated as a non linear programming where the average sample number function is considered as an objective function to be minimized and the lot acceptance probabilities at acceptable quality level and limiting quality level under the OC curve are considered as constraints. The practical implementation of the proposed mixed sampling plan is explained with an illustrative real time example. Advantages of the proposed sampling plan are also discussed in terms of comparison with other existing sampling plans.     

Optimal designing of two-level skip-lot sampling reinspection plan

Skip-lot sampling plan is often applied in industries for reducing the cost and effort of the inspection of the product having excellent quality history. Consequence of skip-lot sampling plans is to reduce the cost of inspection so which are more attractive in economical aspect. In this paper, we develop a sampling plan by incorporating the idea of resampling in two-level skip lot sampling plan and the new plan is designated as SkSP-2L.1-R. This paper presents the Markov chain formulation of the proposed plan along with the derivation of performance measures of the plan. We also provide the designing methodology to determine the optimal parameters of the SkSP-2L.1-R plan so as to minimize the average sample number by using two points on the operating characteristic curve approach. By contemplating various combinations of producer and consumer quality levels along with respective risks, a table is constructed to determine the optimal parameters. An industrial application of the proposed SkSP-2L.1-R plan is discussed. The SkSP-2L.1-R with single sampling plan as a reference plan is compared with the conventional single sampling plan, SkSP-2 plan and SkSP-2-R plan and proved that the proposed SkSP-2L.1-R plan outperforms these plans.KEYWORDS: Consumer quality level, average sample number, producer quality level, resampling scheme, skip-lot sampling     

Acceptance sampling plans for linear profiles with one-sided specifications

In this study, we propose three new sampling plans based on yield index C_puA for linear profiles with one-sided specifications, including the resubmitted sampling plan, the repetitive group sampling plan, and the multiple dependent state repetitive sampling plan. The operating characteristic functions of our proposed sampling plans are developed. The plan parameters of our proposed sampling plans are determined through nonlinear optimization. The plan parameters are reported for various combinations of acceptable quality level and limiting quality level. The three sampling plans are compared with the existing single sampling plan in terms of the average sample number. A real example is used to illustrate the applications.     

Developing a variables repetitive group sampling plan based on process capability index C pk with unknown mean and variance

In this paper, variables repetitive group sampling plans are developed based on the process capability index C _pk when the quality characteristic follows a normal distribution with unknown mean and variance. The sampling plan parameters such as the sample size and the acceptance constant are determined to minimize the average sample number. Symmetric and asymmetric cases, in percent defectives due to two specification limits, are dealt with for specified combinations of acceptable quality level and limiting quality level. Tables are provided and examples are given to use proposed plans in practice.     

Selection of csp-t plans

Various continuous sampling plans have been proposed for monitoring the quality of continuous production processes. The multi-level continuous sampling plan of MIL-STD-1235C (1988) is designated as CSP-T Plan. CSP-T plan is a three-level tightened continuous sampling plan. It requires a switch to 100% inspection, at any level, whenever a nonconforming unit is found. This provides quick rectification in the event of a shift in quality. In this paper certain performance characteristics of CSP-T plan are derived using the approach of Stephens (1979) under the assumption that the production process is in statistical control. For the selection of CSP-T plans, two tables are given. These tables can be used to obtain parameters i (clearance interval) and f (sampling fraction) of the CSP-T plan for given acceptable quality level (AQL) with producer’ risk α=0.05 or the limiting quality level(LQL) with consumer’ risk β=0.10 and the outgoing quality limit(AOQL). Two examples are also given to illustrate the selection of plans from these tables     

Acceptance sampling plan based on an exponentially weighted moving average statistic with the yield index for autocorrelation between polynomial profiles

Acceptance sampling plans based on process yield indices provide a proven resource for the lot-sentencing problem when the required fraction defective is very low. In this study, a new sampling plan based on the exponentially weighted moving average (EWMA) model with yield index for lot sentencing for autocorrelation between polynomial profiles is proposed. The advantage of the EWMA statistic is the accumulation of quality history from previous lots. In addition, the number of profiles required for lot sentencing is more economical than in the traditional single sampling plan. Considering the acceptable quality level (AQL) at the producer's risk and the lot tolerance percent defective (LTPD) at the consumer's risk, we proposed a new search algorithm to determine the optimal plan parameters. The plan parameters are tabulated for various combinations of the smoothing constant of the EWMA statistic, AQL, LTPD, and two risks. A comparison study and two numerical examples are provided to show the applicability of the proposed sampling plan.     

Selection of tightened two-level continuous sampling plans

Lieberman and Solomon (1955) introduced multi-level continuous sampling plans and Derman et al. (1957) extended them as tightened multi-level continuous plans. MLP-T plan is one of the three tightened multi-level continuous sampling plans of Derman et al. (1957). In this paper, we restrict our discussion to MLP-T plans with two sampling levels. Using a Markov chain model, expressions for the average outgoing quality, the average fraction inspected and the operating characteristic function are derived. Four tables are given to enable selection of MLP-T plans with two sampling levels when the acceptable quality level or the limiting quality level and the average outgoing quality limit are specified.     

Determination of a new mixed variable lot-size multiple dependent state sampling plan based on the process capability index

This article proposes a new mixed variable lot-size multiple dependent state sampling plan in which the attribute sampling plan can be used in the first stage and the variables multiple dependent state sampling plan based on the process capability index will be used in the second stage for the inspection of measurable quality characteristics. The proposed mixed plan is developed for both symmetric and asymmetric fraction non conforming. The optimal plan parameters can be determined by considering the satisfaction levels of the producer and the consumer simultaneously at an acceptable quality level and a limiting quality level, respectively. The performance of the proposed plan over the mixed single sampling plan based on C_pk and the mixed variable lot size plan based on C_pk with respect to the average sample number is also investigated. Tables are constructed for easy selection of plan parameters for both symmetric and asymmetric fraction non conforming and real world examples are also given for the illustration and practical implementation of the proposed mixed variable lot-size plan.     

Selection of conditional sampling plans for given AQL and LQL

This paper presents procedures and tables for the selection of conditional sampling plans, viz. conditional double sampling plan, chain-deferred sampling plan, link sampling plan, and ChSP-4A chain sampling plan for given acceptable quality level (AQL), producer's risk, limiting quality level and consumer's risk giving minimum sample size at AQL under the conditions of the Poisson model for the operating characteristic curve.     

A mixed double sampling plan based on Cpk

Abstract

Acceptance sampling plans are quality tools for the manufacturer and the customer. The ultimate result of reduction of nonconforming items will increase the profit of the manufacturer and enhance the satisfaction of the consumer. In this article, a mixed double sampling plan is proposed in which the attribute double sampling inspection is used in the first stage and a variables sampling plan based on the process capability index C_pk is used in the second stage. The optimal parameters are determined so that the producer’s and the consumer’s risks are to be satisfied with minimum average sample number. The optimal parameters of the proposed plan are estimated using different plan settings using two points on the operating characteristic curve approach. In designing the proposed mixed double sampling plan, we consider the symmetric and asymmetric nonconforming cases under variables inspection. The efficiency of the proposed plan is discussed and compared with the existing sampling plans. Tables are constructed for easy selection of the optimal plan parameters and an industrial example is also included for implementation of the proposed plan.     

A new sampling plan under the exponential distribution

This article considers a sampling plan when the quality characteristic follows the exponential distribution. We provide the exact approach and propose an approximated approach. In the proposed approximation, a new statistic combined with a Weibull transformation is used for the normal approximation. The plan parameters are obtained through the two-point approach at the acceptable quality level (AQL) and the limiting quality level (LQL). The tables for plan parameters are reported according to various values of the AQL and the LQL when the producer's and the consumer's risks are given. A real example is given to illustrate the proposed approximation approach.     

Generalized tightened two-level continuous sampling plans

In 1955, Lieberman and Solomon introduced multi-level (MLP) continuous sampling plans. Derman et al . then extended the multi-level plans as tightened multi-level plans (MLP-T). In this paper, a generalization of MLP-T with two sampling levels is presented. Using a Markov chain model, expressions for the performance measures of the general MLP-T plans are derived. Tables are also presented for the selection of general MLP-T plans with two sampling levels when the acceptable quality level, limiting quality level, indiff erence quality level and average outgoing quality level are specified.     

Designing of variables quick switching sampling system by considering process loss functions

This paper proposes a variables quick switching system where the quality characteristic of interest follows a normal distribution and the quality characteristic is evaluated through a process loss function. Most of the variables sampling plans available in the literature focus only on the fraction non-conforming and those plans do not distinguish between the products that fall within the specification limits. The products that fall within specification limits may not be good if their mean is too away from the target value. So developing a sampling plan by considering process loss is inevitable in these situations. Based on this idea, we develop a variables quick switching system based on the process loss function for the application of the processes requiring low process loss. Tables are also constructed for the selection of parameters of variables quick switching system for given acceptable quality level and limiting quality level. The results are explained with examples.     

Selection of ChSP-1 chain sampling plans for given acceptable quality level and limiting quality level

Procedures and tables are given for the selection of chain sampling plans of type ChSP-1 for given acceptable quality level, producer's risk, limiting quality level and consumer's risk. Selection of ChSP-1 plan is discussed for both proportion nonconforming and the number of nonconformities per unit.