Partially replicated two-level fractional factorial designs via semifoldover

Most fractional factorial designs have no replicated points and thus do not provide a reliable estimate for experimental error. The objective of this paper is to study the issue of partially replicated two-level fractional factorial (FF) designs, thereby allowing for the unbiased estimation of the experimental error while maintaining the orthogonality of the main effects. Through the tool of indicator function and the idea of semifoldover, we propose two simple and effective techniques to produce designs with partially replicated points in general two-level FF designs, whether they are regular or not. The related properties of constructed partially replicated designs are investigated. Our results indicate that partially replicated FF are competitive in practice.     

On the Use of Semi-folding in Regular Blocked Two-level Factorial Designs

In this article, we consider experimental situations where a blocked regular two-level fractional factorial initial design is used. We investigate the use of the semi-fold technique as a follow-up strategy for de-aliasing effects that are confounded in the initial design as well as an alternative method for constructing blocked fractional factorial designs. A construction method is suggested based on the full foldover technique and sufficient conditions are obtained when the semi-fold yields as many estimable effects as the full foldover.     

On the equivalence of definitions for regular fractions of mixed-level factorial designs

The notion of regularity for fractional factorial designs was originally defined only for two-level factorial designs. Recently, rather different definitions for regular fractions of mixed-level factorial designs have been proposed by Collombier [1996. Plans d’Expérience Factoriels. Springer, Berlin], Wu and Hamada [2000. Experiments. Wiley, New York] and Pistone and Rogantin [2008. Indicator function and complex coding for mixed fractional factorial designs. J. Statist. Plann. Inference 138, 787–802]. In this paper we prove that, surprisingly, these definitions are equivalent. The proof of equivalence relies heavily on the character theory of finite Abelian groups. The group-theoretic framework provides a unified approach to deal with mixed-level factorial designs and treat symmetric factorial designs as a special case. We show how within this framework each regular fraction is uniquely characterized by a defining relation as for two-level factorial designs. The framework also allows us to extend the result that every regular fraction is an orthogonal array of a strength that is related to its resolution, as stated in Dey and Mukerjee [1999. Fractional Factorial Plans. Wiley, New York] to mixed-level factorial designs.     

Catalogue of small runs nonregular designs from hadamard matrices with generalized minimum aberration

Fries and Hunter ( 1980 ) proposed the Minimum Aberration criterion (MA) for selecting regular designs. The regular designs with MA are msot commonly used because they are considered as the best designs. How ever, as pointed out by Chen, Sun and Wu ( 1993 ), there are situations that other designs may better meet the design need. Therefore, they catalogued some two-level and three-level fractional factorial regular designs with small (16,27,32,64) runs. For nonregular designs, such as the ones taken from Hadamard matrices, the MA criterion is not appUcable. Deng and Tang ( 1999 ) introduced Generalized Minimum Aberration Criterion (GMA) as a natural extension to the MA criterion. Similar to the case in the regular designs, other designs may better meet practical need, In this paper, we use the GMA criterion to give a catalogue of nonregular designs with smaU (16,20,24) runs.     

(M,S)-optimality in selecting factorial designs

Use of the (M,S) criterion to select and classify factorial designs is proposed and studied. The criterion is easy to deal with computationally and it is independent of the choice of treatment contrasts. It can be applied to two-level designs as well as multi-level symmetrical and asymmetrical designs. An important connection between the (M,S) and minimum aberration criteria is derived for regular fractional factorial designs. Relations between the (M,S) criterion and generalized minimum aberration criteria on nonregular designs are also discussed. The (M,S) criterion is then applied to study the projective properties of some nonregular designs.     

Indicator function and complex coding for mixed fractional factorial designs

In a general fractional factorial design, the n levels of a factor are coded by the nth roots of the unity. This device allows a full generalization to mixed-level designs of the theory of the polynomial indicator function which has already been introduced for two-level designs in a joint paper with Fontana. The properties of orthogonal arrays and regular fractions are discussed.     

Robust two-level regular fractional factorial designs

Abstract

In this paper, we introduce the concept of model quality for two-level regular fractional factorial designs. Under the effect hierarchy principle, this paper raises the definition of model quality and introduces robust model-number pattern (RP) to choose the optimal robust design. Some theoretical results on this optimality and comparisons with GMC and MEC criterion are given.     

Optimal blocking and foldover plans for nonregular two-level designs

This paper discusses the issue of choosing optimal designs when both blocking and foldover techniques are simultaneously employed to nonregular two-level fractional factorial designs. By using the indicator function, the treatment and block generalized wordlength patterns of the combined blocked design under a general foldover plan are defined. Some general properties of combined block designs are also obtained. Our results extend the findings of Ai et al. (2010) from regular designs to nonregular designs. Based on these theoretical results, a catalog of optimal blocking and foldover plans in terms of the generalized aberration criterion for nonregular initial design with 12, 16 and 20 runs is tabulated, respectively.     

Switching-one-column follow-up experiments for Plackett-Burman designs

Industrial experiments are frequently performed sequentially using two-level fractional factorial designs. In this context, a common strategy for the design of follow-up experiments is to switch the signs in one column. It is well known that this strategy, when applied to two-level fractional factorial resolution III designs, will clear the main effect, for which the switch was performed, from any confounding with any other two-factor interactions and will also clear all the two-factor interactions between that factor and the other main effects from any confounding with other two-factor interactions. In this article, we extend this result and show that this strategy applies to any orthogonal two-level resolution III design and therefore specifically to any two-level Plackett- Burman design .     

De-aliasing effects using semifoldover techniques

Semifoldover designs, obtained by semifolding a regular two-level factorial design, have been discussed recently in the literature. In this article, with the use of indicator functions, we investigate various semifoldover designs that are obtained from a general two-level factorial design. We discuss when a main factor or a two-factor interaction can be de-aliased from their aliased two-factor interactions, and extend some of the existing results from regular designs to non-regular designs. Finally, we present some examples to illustrate the results developed here.     

Graph based isomorph-free generation of two-level regular fractional factorial designs

We provide a new necessary and sufficient check for testing the isomorphism of two 2-level regular fractional factorial designs. The approach is based on modeling fractional factorial designs as bipartite graphs. We employ an efficient canonical graph labeling approach to compare two designs for isomorphism. We then improve upon the existing non-isomorphic fractional factorial design generation algorithm by reducing the number of candidate designs from which isomorphs need to be removed. Not only does our method generate non-isomorphic designs much faster, it is also able to generate designs with run sizes of 2048 and 4096 runs, which were not generated by the existing methods.     

Partial duplication in two-level fractional factorial designs

Most fractional factorial designs have no replicated points and thus do not provide an estimate for pure error. The construction methods for orthogonal main-effect plan in the literature usually do not produce designs with duplicate points. However, it is possible to combine four fractions to provide a set of duplicate points without sacrificing the orthogonality of main effects. This paper proposes two techniques of this idea to produce designs with replicate points in two-level fractional factorial designs.     

One-eighth- and one-sixteenth-fraction quaternary code designs with high resolution

The development of a general methodology for the construction of good two-level nonregular designs has received significant attention over the last 10 years. Recent works by Phoa and Xu (2009) and Zhang et al. (2011) indicate that quaternary code (QC) designs are very promising in this regard. This paper explores a systematic construction for 1/8th and 1/16th fraction QC designs with high resolution for any number of factors. The 1/8th fraction QC designs often have larger resolution than regular designs of the same size. A majority of the 1/16th fraction QC designs also have larger resolution than comparable two-level regular designs.     

Blocking in two-level non-regular fractional factorial designs

In this paper we consider screening experiments where a two-level fractional factorial design is to be used to identify significant factors in an experimental process and where the runs in the experiment are to occur in blocks of equal size. A simple method based on the foldover technique is given for constructing resolution IV orthogonal and non-orthogonal blocked designs and examples are given to illustrate the process.     

Creating catalogues of two-level nonregular fractional factorial designs based on the criteria of generalized aberration

We consider the problem of constructing good two-level nonregular fractional factorial designs. The criteria of minimum G and G₂ aberration are used to rank designs. A general design structure is utilized to provide a solution to this practical, yet challenging, problem. With the help of this design structure, we develop an efficient algorithm for obtaining a collection of good designs based on the aforementioned two criteria. Finally, we present some results for designs of 32 and 40 runs obtained from applying this algorithmic approach.     

Orthogonal three-level parallel flats designs for user-specified resolution

Orthogonal factorial and fractional factorial designs are very popular in many experimental studies, particularly the two-level and three-level designs used in screening experiments. When an experimenter is able to specify the set of possibly nonnegligible factorial effects, it is sometimes possible to obtain an orthogonal design belonging to the class of parallel flats designs, that has a smaller run-size than a suitable design from the class of classical fractional factorial designs belonging to the class of single flat designs. Sri-vastava and Li (1996) proved a fundamental theorem of orthogonal s-level, s being a prime, designs of parallel flats type for the user-specified resolution. They also tabulated a series of orthogonal designs for the two-level case. No orthogonal designs for three-level case are available in their paper. In this paper, we present a simple proof for the theorem given in Srivastava and Li (1996) for the three-level case. We also give a dual form of the theorem, which is more useful for developing an algorithm for construction of orthogonal designs. Some classes of three-level orthogonal designs with practical run-size are given in the paper.     

D-Optimal Two-Level Fractional Factorial Designs of Resolution III with Two Dispersion Factors

The problem of finding D-optimal designs, with two dispersion factors, for the estimation of all location main effects is investigated in the class of regular unreplicated two-level fractional factorial designs of resolution III. Designs having length three words involving both of the dispersion factors in the defining relation are shown to be inferior in terms of D-optimality. Tables of factors that are named as the two dispersion factors so that the resulting design is either D-optimal or has the largest determinant of the information matrix are provided. Rank-order of designs is studied when the number of length three words involving either one of the dispersion factors and the number of length four words involving both of the dispersion factors are fixed. Rank-order of designs when the numbers of aforementioned words are less than or equal to ten is given.     

Optimal block sequences for blocked fractional factorial split-plot designs

It is known that for blocked 2^n-k$2^{n-k}$ designs a judicious sequencing of blocks may allow one to obtain early and insightful results regarding influential parameters in the experiment. Such findings may justify the early termination of the experiment thereby producing cost and time savings. This paper introduces an approach for selecting the optimal sequence of blocks for regular two-level blocked fractional factorial split-plot screening experiments. An optimality criterion is developed so as to give priority to the early estimation of low-order factorial effects. This criterion is then applied to the minimum aberration blocked fractional factorial split-plot designs tabled in McLeod and Brewster [2004. The design of blocked fractional factorial split-plot experiments. Technometrics 46, 135–146]. We provide a catalog of optimal block sequences for 16 and 32-run minimum aberration blocked fractional factorial split-plot designs run in either 4 or 8 blocks.     

Catalogue of Group Structures for Three-level Fractional Factorial Designs

Taguchi (1959) introduced the concept of split-unit design to sort the factors into different groups depending upon the difficulties involved in changing the levels of factors. Li et al. (1991) renamed it as split-plot design. Chen et al. (1993) have given a catalogue of small designs for two- and three-level fractional factorial designs pertaining to a single type of factors. Aggarwal et al. (1997) have given a catalogue of group structure for two-level fractional factorial designs developed under the concept of split-plot design. In this paper, an algorithm has been developed for generating group structure and possible allocations for various 3^n-k fractional factorial designs.     

On the use of partial confounding for the construction of alternative regular two-level blocked fractional factorial designs

In this paper, we consider experimental situations in which a regular fractional factorial design is to be used to study the effects of m two-level factors using n=2^m−k experimental units arranged in 2^p blocks of size 2^m−k−p. In such situations, two-factor interactions are often confounded with blocks and complete information is lost on these two-factor interactions. Here we consider the use of the foldover technique in conjunction with combining designs having different blocking schemes to produce alternative partially confounded blocked fractional factorial designs that have more estimable two-factor interactions or a higher estimation capacity or both than their traditional counterparts.