Rank-based ridge estimation in multiple linear regression

Multicollinearity and model misspecification are frequently encountered problems in practice that produce undesirable effects on classical ordinary least squares (OLS) regression estimator. The ridge regression estimator is an important tool to reduce the effects of multicollinearity, but it is still sensitive to a model misspecification of error distribution. Although rank-based statistical inference has desirable robustness properties compared to the OLS procedures, it can be unstable in the presence of multicollinearity. This paper introduces a rank regression estimator for regression parameters and develops tests for general linear hypotheses in a multiple linear regression model. The proposed estimator and the tests have desirable robustness features against the multicollinearity and model misspecification of error distribution. Asymptotic behaviours of the proposed estimator and the test statistics are investigated. Real and simulated data sets are used to demonstrate the feasibility and the performance of the estimator and the tests.     

Robust ridge and robust Liu estimator for regression based on the LTS estimator

In the multiple linear regression analysis, the ridge regression estimator and the Liu estimator are often used to address multicollinearity. Besides multicollinearity, outliers are also a problem in the multiple linear regression analysis. We propose new biased estimators based on the least trimmed squares (LTS) ridge estimator and the LTS Liu estimator in the case of the presence of both outliers and multicollinearity. For this purpose, a simulation study is conducted in order to see the difference between the robust ridge estimator and the robust Liu estimator in terms of their effectiveness; the mean square error. In our simulations, the behavior of the new biased estimators is examined for types of outliers: X-space outlier, Y-space outlier, and X-and Y-space outlier. The results for a number of different illustrative cases are presented. This paper also provides the results for the robust ridge regression and robust Liu estimators based on a real-life data set combining the problem of multicollinearity and outliers.     

Variable selection in linear regression based on ridge estimator

In this article, we consider the problem of variable selection in linear regression when multicollinearity is present in the data. It is well known that in the presence of multicollinearity, performance of least square (LS) estimator of regression parameters is not satisfactory. Consequently, subset selection methods, such as Mallow's Cp, which are based on LS estimates lead to selection of inadequate subsets. To overcome the problem of multicollinearity in subset selection, a new subset selection algorithm based on the ridge estimator is proposed. It is shown that the new algorithm is a better alternative to Mallow's Cp when the data exhibit multicollinearity.     

Robust Linearized Ridge M-estimator for Linear Regression Model

In the multiple linear regression, multicollinearity and outliers are commonly occurring problems. They produce undesirable effects on the ordinary least squares estimator. Many alternative parameter estimation methods are available in the literature which deals with these problems independently. In practice, it may happen that the multicollinearity and outliers occur simultaneously. In this article, we present a new estimator called as Linearized Ridge M-estimator which combats the problem of simultaneous occurrence of multicollinearity and outliers. A real data example and a simulation study is carried out to illustrate the performance of the proposed estimator.     

A new estimator combining the ridge regression and the restricted least squares methods of estimation

It is well-known in the literature on multicollinearity that one of the major consequences of multicollinearity on the ordinary least squares estimator is that the estimator produces large sampling variances, which in turn might inappropriately lead to exclusion of otherwise significant coefficients from the model. To circumvent this problem, two accepted estimation procedures which are often suggested are the restricted least squares method and the ridge regression method. While the former leads to a reduction in the sampling variance of the estimator, the later ensures a smaller mean square error value for the estimator. In this paper we have proposed a new estimator which is based on a criterion that combines the ideas underlying these two estimators. The standard properties of this new estimator have been studied in the paper. It has also been shown that this estimator is superior to both the restricted least squares as well as the ordinary ridge regression estimators by the criterion of mean sauare error of the estimator of the regression coefficients when the restrictions are indeed correct. The conditions for superiority of this estimator over the other two have also been derived for the situation when the restrictions are not correct.     

The Almon two parameter estimator for the distributed lag models

The two parameter estimator proposed by Özkale and Kaç?ranlar [The restricted and unrestricted two parameter estimators. Comm Statist Theory Methods. 2007;36(15):2707–2725] is a general estimator which includes the ordinary least squares, the ridge and the Liu estimators as special cases. In the present paper we introduce Almon two parameter estimator based on the two parameter estimation procedure to deal with the problem of multicollinearity for the distiributed lag models. This estimator outperforms the Almon estimator according to the matrix mean square error criterion. Moreover, a numerical example and a Monte Carlo simulation experiment are presented by using different estimators of the biasing parameters.     

Graphical methods for evaluating ridge regression estimator in mixture experiments

When the component proportions in mixture experiments are restricted by lower and upper bounds, multicollinearity appears all too frequently. Thus, we can suggest the use of ridge regression as a mean for stabilizing the coefficient estimates in the fitted model. We propose graphical methods for evaluating the effect of ridge regression estimator with respect to the predicted response value and the prediction variance.     

Cross validation of ridge regression estimator in autocorrelated linear regression models

ABSTRACT

In this paper, we investigated the cross validation measures, namely OCV, GCV and Cp under the linear regression models when the error structure is autocorrelated and regressor data are correlated. The best performed ridge regression estimator is obtained by getting the optimal ridge parameter so as to minimize these measures. A Monte Carlo simulation study is given to see how the optimal ridge parameter is affected by autocorrelation and the strength of multicollinearity.     

Improved ridge estimators in a linear regression model

In this paper, the notion of the improved ridge estimator (IRE) is put forward in the linear regression model y=X β+e. The problem arises if augmenting the equation 0=c′α+ε instead of 0=C α+? to the model. Three special IREs are considered and studied under the mean-squared error criterion and the prediction error sum of squares criterion. The simulations demonstrate that the proposed estimators are effective and recommendable, especially when multicollinearity is severe.     

Improved robust ridge M-estimation

It is developed that non-sample prior information about regression vector-parameter, usually in the form of constraints, improves the risk performance of the ordinary least squares estimator (OLSE) when it is shrunken. However, in practice, it may happen that both multicollinearity and outliers exist simultaneously in the data. In such a situation, the use of robust ridge estimator is suggested to overcome the undesirable effects of the OLSE. In this article, some prior information in the form of constraints is employed to improve the performance of this estimator in the multiple regression model. In this regard, shrinkage ridge robust estimators are defined. Advantages of the proposed estimators over the usual robust ridge estimator are also investigated using Monte-Carlo simulation as well as a real data example.     

The relative efficiency of the restricted estimators in linear regression models

This paper deals with the problem of multicollinearity in a multiple linear regression model with linear equality restrictions. The restricted two parameter estimator which was proposed in case of multicollinearity satisfies the restrictions. The performance of the restricted two parameter estimator over the restricted least squares (RLS) estimator and the ordinary least squares (OLS) estimator is examined under the mean square error (MSE) matrix criterion when the restrictions are correct and not correct. The necessary and sufficient conditions for the restricted ridge regression, restricted Liu and restricted shrunken estimators, which are the special cases of the restricted two parameter estimator, to have a smaller MSE matrix than the RLS and the OLS estimators are derived when the restrictions hold true and do not hold true. Theoretical results are illustrated with numerical examples based on Webster, Gunst and Mason data and Gorman and Toman data. We conduct a final demonstration of the performance of the estimators by running a Monte Carlo simulation which shows that when the variance of the error term and the correlation between the explanatory variables are large, the restricted two parameter estimator performs better than the RLS estimator and the OLS estimator under the configurations examined.     

Positive-rule stein-type almost unbiased ridge estimator in linear regression model

Abstract

In this article, when it is suspected that regression coefficients may be restricted to a subspace, we discuss the parameter estimation of regression coefficients in a multiple regression model. Then, in order to improve the preliminary test almost ridge estimator, we study the positive-rule Stein-type almost unbiased ridge estimator based on the positive-rule stein-type shrinkage estimator and almost unbiased ridge estimator. After that, quadratic bias and quadratic risk values of the new estimator are derived and compared with some relative estimators. And we also discuss the option of parameter k. Finally, we perform a real data example and a Monte Carlo study to illustrate theoretical results.     

Bounds on the biasing parameter in ridge regression

One of the problems with the ridge estimator is the appropriate value for the unknown biasing parameter k. In theory k can take a range of values, though some values are preferable to others. In this note we consider the optimum value for k and give bounds on the expected value of k.     

Bayesian Tobit quantile regression using g-prior distribution with ridge parameter

A Bayesian approach is proposed for coefficient estimation in the Tobit quantile regression model. The proposed approach is based on placing a g-prior distribution depends on the quantile level on the regression coefficients. The prior is generalized by introducing a ridge parameter to address important challenges that may arise with censored data, such as multicollinearity and overfitting problems. Then, a stochastic search variable selection approach is proposed for Tobit quantile regression model based on g-prior. An expression for the hyperparameter g is proposed to calibrate the modified g-prior with a ridge parameter to the corresponding g-prior. Some possible extensions of the proposed approach are discussed, including the continuous and binary responses in quantile regression. The methods are illustrated using several simulation studies and a microarray study. The simulation studies and the microarray study indicate that the proposed approach performs well.     

The feasible generalized restricted ridge regression estimator

The presence of autocorrelation in errors and multicollinearity among the regressors have undesirable effects on the least-squares regression. There are a wide range of methods which are proposed to overcome the usefulness of the ordinary least-squares estimator or the generalized least-squares estimator, such as the Stein-rule, restricted least-squares or ridge estimator. Therefore, we introduce a new feasible generalized restricted ridge regression (FGRR) estimator to examine multicollinearity and autocorrelation problems simultaneously for the general linear regression model. We also derive some statistical properties of the FGRR estimator and comparisons have been conducted using matrix mean-square error. Moreover, a Monte Carlo simulation experiment is performed to investigate the performance of the proposed estimator over the others.     

A revised Cholesky decomposition to combat multicollinearity in multiple regression models

As known, the ordinary least-squares estimator (OLSE) is unbiased and also, has the minimum variance among all the linear unbiased estimators. However, under multicollinearity the estimator is generally unstable and poor in the sense that variance of the regression coefficients may be inflated and absolute values of the estimates may be too large. There are several classes of biased estimators in statistical literature to decrease the effect of multicollinearity in the design matrix. Here, based on the Cholesky decomposition, we propose such an estimator which makes the data to be slightly distorted. The exact risk expressions as well as the biases are derived for the proposed estimator. Also, some results demonstrating superiority of the suggested estimator over OLSE are obtained. Finally, a Monté-Carlo simulation study and a real data application related to acetylene data are presented to support our theoretical discussions.     

Weak consistency of M-estimator in linear regression model with asymptotically almost negatively associated errors

Abstract

This paper studies a linear regression model with asymptotically almost negatively associated (AANA, in short) random errors. Under some mild conditions, the weak consistency of M-estimator of the unknown parameter is investigated, which extend the corresponding results for independent random errors and negatively associated (NA, in short) random errors. At last, two simulation examples are presented to verify the weak consistency of M-estimator in the model.     

Comment on a generalized stochastic restricted ridge regression estimator

In this note, we make some comments about the paper of Alheety and Kibria (2014 Alheety, M.I., Kibria, B.M.G. (2014). A generalized stochastic restricted ridge regression estimator. Commun. Stat. Theor. Meth. 43:4415–4427.[Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]) and correct the wrongly proved Theorems in that paper.     

Some ridge regression estimators for the zero-inflated Poisson model

The zero-inflated Poisson regression model is commonly used when analyzing economic data that come in the form of non-negative integers since it accounts for excess zeros and overdispersion of the dependent variable. However, a problem often encountered when analyzing economic data that has not been addressed for this model is multicollinearity. This paper proposes ridge regression (RR) estimators and some methods for estimating the ridge parameter k for a non-negative model. A simulation study has been conducted to compare the performance of the estimators. Both mean squared error and mean absolute error are considered as the performance criteria. The simulation study shows that some estimators are better than the commonly used maximum-likelihood estimator and some other RR estimators. Based on the simulation study and an empirical application, some useful estimators are recommended for practitioners.     

Restricted Two Parameter Ridge Estimator

In 2005 Lipovetsky and Conklin proposed an estimator, the two parameter ridge estimator (TRE), as an alternative to the ordinary least squares estimator (OLSE) and the ordinary ridge estimator (RE) in the presence of multicollinearity, and in 2006 Lipovetsky improved the two parameter model. In this paper, we introduce two new estimators, one of which is the modified two parameter ridge estimator (MTRE) defined by following Swindel's paper of 1976. The other one is the restricted two parameter ridge estimator (RTRE) which is derived by setting additional linear restrictions on the parameter vectors. This estimator is a generalization of the restricted least squares estimator (RLSE) and includes the restricted ridge estimator (RRE) proposed by Groß in 2003. A numerical example is provided and a simulation study is conducted for the comparisons of the RTRE with the OLSE, RLSE, RE, RRE and TRE.