Nested combination tests with a time‐to‐event endpoint using a short‐term endpoint for design adaptations

Adaptive trial methodology for multiarmed trials and enrichment designs has been extensively discussed in the past. A general principle to construct test procedures that control the family‐wise Type I error rate in the strong sense is based on combination tests within a closed test. Using survival data, a problem arises when using information of patients for adaptive decision making, which are under risk at interim. With the currently available testing procedures, either no testing of hypotheses in interim analyses is possible or there are restrictions on the interim data that can be used in the adaptation decisions as, essentially, only the interim test statistics of the primary endpoint may be used. We propose a general adaptive testing procedure, covering multiarmed and enrichment designs, which does not have these restrictions. An important application are clinical trials, where short‐term surrogate endpoints are used as basis for trial adaptations, and we illustrate how such trials can be designed. We propose statistical models to assess the impact of effect sizes, the correlation structure between the short‐term and the primary endpoint, the sample size, the timing of interim analyses, and the selection rule on the operating characteristics.     

Adaptive graph‐based multiple testing procedures

Multiple testing procedures defined by directed, weighted graphs have recently been proposed as an intuitive visual tool for constructing multiple testing strategies that reflect the often complex contextual relations between hypotheses in clinical trials. Many well‐known sequentially rejective tests, such as (parallel) gatekeeping tests or hierarchical testing procedures are special cases of the graph based tests. We generalize these graph‐based multiple testing procedures to adaptive trial designs with an interim analysis. These designs permit mid‐trial design modifications based on unblinded interim data as well as external information, while providing strong family wise error rate control. To maintain the familywise error rate, it is not required to prespecify the adaption rule in detail. Because the adaptive test does not require knowledge of the multivariate distribution of test statistics, it is applicable in a wide range of scenarios including trials with multiple treatment comparisons, endpoints or subgroups, or combinations thereof. Examples of adaptations are dropping of treatment arms, selection of subpopulations, and sample size reassessment. If, in the interim analysis, it is decided to continue the trial as planned, the adaptive test reduces to the originally planned multiple testing procedure. Only if adaptations are actually implemented, an adjusted test needs to be applied. The procedure is illustrated with a case study and its operating characteristics are investigated by simulations. Copyright © 2014 John Wiley & Sons, Ltd.     

An approach to use of an adaptive procedure to clinical trials for molecularly heterogenous subject selection at interim

Abstract

For clinical trials, molecular heterogeneity has played a more important role recently. Many novel clinical trial designs prospectively incorporate molecular information to evaluation of treatment effects. In this paper, an adaptive procedure incorporating a non-pre-specified genomic biomarker is employed in the interim of a conventional trial. A non-pre-specified binary genomic biomarker, which is predictive of treatment effect, is used to classify study patients into two mutually exclusive subgroups at the interim review. According to the observations at the interim stage, adaptations such as adjusting sample size or shifting eligibility of study patients are then made in case of different scenarios.     

Integrating phase 2 into phase 3 based on an intermediate endpoint while accounting for a cure proportion—With an application to the design of a clinical trial in acute myeloid leukemia

For a trial with primary endpoint overall survival for a molecule with curative potential, statistical methods that rely on the proportional hazards assumption may underestimate the power and the time to final analysis. We show how a cure proportion model can be used to get the necessary number of events and appropriate timing via simulation. If phase 1 results for the new drug are exceptional and/or the medical need in the target population is high, a phase 3 trial might be initiated after phase 1. Building in a futility interim analysis into such a pivotal trial may mitigate the uncertainty of moving directly to phase 3. However, if cure is possible, overall survival might not be mature enough at the interim to support a futility decision. We propose to base this decision on an intermediate endpoint that is sufficiently associated with survival. Planning for such an interim can be interpreted as making a randomized phase 2 trial a part of the pivotal trial: If stopped at the interim, the trial data would be analyzed, and a decision on a subsequent phase 3 trial would be made. If the trial continues at the interim, then the phase 3 trial is already underway. To select a futility boundary, a mechanistic simulation model that connects the intermediate endpoint and survival is proposed. We illustrate how this approach was used to design a pivotal randomized trial in acute myeloid leukemia and discuss historical data that informed the simulation model and operational challenges when implementing it.     

Adaptive modelling of dose–response relationships using smoothing splines

We consider the use of smoothing splines for the adaptive modelling of dose–response relationships. A smoothing spline is a nonparametric estimator of a function that is a compromise between the fit to the data and the degree of smoothness and thus provides a flexible way of modelling dose–response data. In conjunction with decision rules for which doses to continue with after an interim analysis, it can be used to give an adaptive way of modelling the relationship between dose and response. We fit smoothing splines using the generalized cross‐validation criterion for deciding on the degree of smoothness and we use estimated bootstrap percentiles of the predicted values for each dose to decide upon which doses to continue with after an interim analysis. We compare this approach with a corresponding adaptive analysis of variance approach based upon new simulations of the scenarios previously used by the PhRMA Working Group on Adaptive Dose‐Ranging Studies. The results obtained for the adaptive modelling of dose–response data using smoothing splines are mostly comparable with those previously obtained by the PhRMA Working Group for the Bayesian Normal Dynamic Linear model (GADA) procedure. These methods may be useful for carrying out adaptations, detecting dose–response relationships and identifying clinically relevant doses. Copyright © 2009 John Wiley & Sons, Ltd.     

Exploring changes in treatment effects across design stages in adaptive trials

The recently published Committee for Medicinal Products for Human Use reflection paper on flexible designs highlights a controversial issue regarding the interpretation of adaptive trials. The guideline suggests that a test for heterogeneity should be preplanned and if treatment effect estimates differ significantly between design stages then data collected before and after the interim analysis might not be combined in a formal analysis. In this paper we investigate error rates for such a procedure in the presence of calendar-time effects. Furthermore, we present an alternative testing strategy based on change point methods. In a simulation study we demonstrate that our procedure performs well in comparison to that suggested by the guideline.     

Repeated Confidence Intervals Under Fractional Brownian Motion in Long-Term Clinical Trials

Repeated confidence interval (RCI) is an important tool for design and monitoring of group sequential trials according to which we do not need to stop the trial with planned statistical stopping rules. In this article, we derive RCIs when data from each stage of the trial are not independent thus it is no longer a Brownian motion (BM) process. Under this assumption, a larger class of stochastic processes fractional Brownian motion (FBM) is considered. Comparisons of RCI width and sample size requirement are made to those under Brownian motion for different analysis times, Type I error rates and number of interim analysis. Power family spending functions including Pocock, O'Brien-Fleming design types are considered for these simulations. Interim data from BHAT and oncology trials is used to illustrate how to derive RCIs under FBM for efficacy and futility monitoring.     

On the efficiency of adaptive designs for flexible interim decisions in clinical trials

It is shown that the optimal group sequential designs considered in Tsiatis and Mehta [2003. On the inefficiency of the adaptive design for monitoring clinical trials. Biometrika 90, 367–378] are special cases of the more general flexible designs which allow for a valid inference after adapting a predetermined way to spend the rejection and acceptance probabilities. An unforeseen safety issue in a clinical trial, for example, could make a change of the preplanned number of interim analyses and their sample sizes appropriate. We derive flexible designs which have equivalent rejection and acceptance regions if no adaptation is performed, but at the same time allow for an adaptation of the spending functions, and have a conditional optimality property.     

Utilizing Bayesian predictive power in clinical trial design

The Bayesian paradigm provides an ideal platform to update uncertainties and carry them over into the future in the presence of data. Bayesian predictive power (BPP) reflects our belief in the eventual success of a clinical trial to meet its goals. In this paper we derive mathematical expressions for the most common types of outcomes, to make the BPP accessible to practitioners, facilitate fast computations in adaptive trial design simulations that use interim futility monitoring, and propose an organized BPP-based phase II-to-phase III design framework.     

Bayesian hierarchical models for adaptive basket trial designs

Basket trials evaluate a single drug targeting a single genetic variant in multiple cancer cohorts. Empirical findings suggest that treatment efficacy across baskets may be heterogeneous. Most modern basket trial designs use Bayesian methods. These methods require the prior specification of at least one parameter that permits information sharing across baskets. In this study, we provide recommendations for selecting a prior for scale parameters for adaptive basket trials by using Bayesian hierarchical modeling. Heterogeneity among baskets attracts much attention in basket trial research, and substantial heterogeneity challenges the basic assumption of exchangeability of Bayesian hierarchical approach. Thus, we also allowed each stratum-specific parameter to be exchangeable or nonexchangeable with similar strata by using data observed in an interim analysis. Through a simulation study, we evaluated the overall performance of our design based on statistical power and type I error rates. Our research contributes to the understanding of the properties of Bayesian basket trial designs.     

Sample size re-estimation for survival data in clinical trials with an adaptive design

In clinical trials with survival data, investigators may wish to re-estimate the sample size based on the observed effect size while the trial is ongoing. Besides the inflation of the type-I error rate due to sample size re-estimation, the method for calculating the sample size in an interim analysis should be carefully considered because the data in each stage are mutually dependent in trials with survival data. Although the interim hazard estimate is commonly used to re-estimate the sample size, the estimate can sometimes be considerably higher or lower than the hypothesized hazard by chance. We propose an interim hazard ratio estimate that can be used to re-estimate the sample size under those circumstances. The proposed method was demonstrated through a simulation study and an actual clinical trial as an example. The effect of the shape parameter for the Weibull survival distribution on the sample size re-estimation is presented.     

Methods for clarifying criteria for study continuation at interim analysis

In monitoring clinical trials, the question of futility, or whether the data thus far suggest that the results at the final analysis are unlikely to be statistically successful, is regularly of interest over the course of a study. However, the opposite viewpoint of whether the study is sufficiently demonstrating proof of concept (POC) and should continue is a valuable consideration and ultimately should be addressed with high POC power so that a promising study is not prematurely terminated. Conditional power is often used to assess futility, and this article interconnects the ideas of assessing POC for the purpose of study continuation with conditional power, while highlighting the importance of the POC type I error and the POC type II error for study continuation or not at the interim analysis. Methods for analyzing subgroups motivate the interim analyses to maintain high POC power via an adjusted interim POC significance level criterion for study continuation or testing against an inferiority margin. Furthermore, two versions of conditional power based on the assumed effect size or the observed interim effect size are considered. Graphical displays illustrate the relationship of the POC type II error for premature study termination to the POC type I error for study continuation and the associated conditional power criteria.     

Conditional estimation using prior information in 2‐stage group sequential designs assuming asymptotic normality when the trial terminated early

Two‐stage designs are widely used to determine whether a clinical trial should be terminated early. In such trials, a maximum likelihood estimate is often adopted to describe the difference in efficacy between the experimental and reference treatments; however, this method is known to display conditional bias. To reduce such bias, a conditional mean‐adjusted estimator (CMAE) has been proposed, although the remaining bias may be nonnegligible when a trial is stopped for efficacy at the interim analysis. We propose a new estimator for adjusting the conditional bias of the treatment effect by extending the idea of the CMAE. This estimator is calculated by weighting the maximum likelihood estimate obtained at the interim analysis and the effect size prespecified when calculating the sample size. We evaluate the performance of the proposed estimator through analytical and simulation studies in various settings in which a trial is stopped for efficacy or futility at the interim analysis. We find that the conditional bias of the proposed estimator is smaller than that of the CMAE when the information time at the interim analysis is small. In addition, the mean‐squared error of the proposed estimator is also smaller than that of the CMAE. In conclusion, we recommend the use of the proposed estimator for trials that are terminated early for efficacy or futility.     

Stopping guidelines vs stopping rules: a practitioner's point of view

Monitoring interim accumulating data in a clinical trial for evidence of therapeutic benefit or toxicity is a frequent policy, usually carried out by an independent scientific committee. While statistical methodology has been developed to assess the significance of these interim analyses, such methods should not be viewed as absolute rules but only serve as useful guides. The decision process to terminate a trial early is very complex and many factors must be taken into account. The complexity of this decision process is illustrated by reviewing the experience of several recent clinical trials.     

Methodological issues with adaptation of clinical trial design

Adaptation of clinical trial design generates many issues that have not been resolved for practical applications, though statistical methodology has advanced greatly. This paper focuses on some methodological issues. In one type of adaptation such as sample size re-estimation, only the postulated value of a parameter for planning the trial size may be altered. In another type, the originally intended hypothesis for testing may be modified using the internal data accumulated at an interim time of the trial, such as changing the primary endpoint and dropping a treatment arm. For sample size re-estimation, we make a contrast between an adaptive test weighting the two-stage test statistics with the statistical information given by the original design and the original sample mean test with a properly corrected critical value. We point out the difficulty in planning a confirmatory trial based on the crude information generated by exploratory trials. In regards to selecting a primary endpoint, we argue that the selection process that allows switching from one endpoint to the other with the internal data of the trial is not very likely to gain a power advantage over the simple process of selecting one from the two endpoints by testing them with an equal split of alpha (Bonferroni adjustment). For dropping a treatment arm, distributing the remaining sample size of the discontinued arm to other treatment arms can substantially improve the statistical power of identifying a superior treatment arm in the design. A common difficult methodological issue is that of how to select an adaptation rule in the trial planning stage. Pre-specification of the adaptation rule is important for the practicality consideration. Changing the originally intended hypothesis for testing with the internal data generates great concerns to clinical trial researchers.     

Adaptive designs for single‐arm phase II trials in oncology

Clinical phase II trials in oncology are conducted to determine whether the activity of a new anticancer treatment is promising enough to merit further investigation. Two‐stage designs are commonly used for this situation to allow for early termination. Designs proposed in the literature so far have the common drawback that the sample sizes for the two stages have to be specified in the protocol and have to be adhered to strictly during the course of the trial. As a consequence, designs that allow a higher extent of flexibility are desirable. In this article, we propose a new adaptive method that allows an arbitrary modification of the sample size of the second stage using the results of the interim analysis or external information while controlling the type I error rate. If the sample size is not changed during the trial, the proposed design shows very similar characteristics to the optimal two‐stage design proposed by Chang et al. (Biometrics 1987; 43:865–874). However, the new design allows the use of mid‐course information for the planning of the second stage, thus meeting practical requirements when performing clinical phase II trials in oncology. Copyright © 2012 John Wiley & Sons, Ltd.     

The shrinking or disappearing observed treatment effect

It is frequently noted that an initial clinical trial finding was not reproduced in a later trial. This is often met with some surprise. Yet, there is a relatively straightforward reason partially responsible for this observation. In this article, we examine this reason by first reviewing some findings in a recent publication in the Journal of the American Medical Association. To help explain the non‐negligible chance of failing to reproduce a previous positive finding, we compare a series of trials to successive diagnostic tests used for identifying a condition. To help explain the suspicion that the treatment effect, when observed in a subsequent trial, seems to have decreased in magnitude, we draw a conceptual analogy between phases II–III development stages and interim analyses of a trial with a group sequential design. Both analogies remind us that what we observed in an early trial could be a false positive or a random high. We discuss statistical sources for these occurrences and discuss why it is important for statisticians to take these into consideration when designing and interpreting trial results. Copyright © 2014 John Wiley & Sons, Ltd.     

Efficacy and toxicity monitoring via Bayesian predictive probabilities in phase II clinical trials

Bayesian monitoring strategies based on predictive probabilities are widely used in phase II clinical trials that involve a single efficacy binary variable. The essential idea is to control the predictive probability that the trial will show a conclusive result at the scheduled end of the study, given the information at the interim stage and the prior beliefs. In this paper, we present an extension of this approach to incorporate toxicity considerations in single-arm phase II trials. We consider two binary endpoints representing response and toxicity of the experimental treatment and define the result as successful at the conclusion of the study if the posterior probability of an high efficacy and that of a small toxicity are both sufficiently large. At any interim look, the Multinomial-Dirichlet distribution provides the predictive probability of each possible combination of future efficacy and toxicity outcomes. It is exploited to obtain the predictive probability that the trial will yield a positive outcome, if it continues to the planned end. Different possible interim situations are considered to investigate the behaviour of the proposed predictive rules and the differences with the monitoring strategies based on posterior probabilities are highlighted. Simulation studies are also performed to evaluate the frequentist operating characteristics of the proposed design and to calibrate the design parameters.

     

A stochastically curtailed two-arm randomised phase II trial design for binary outcomes

Randomised controlled trials are considered the gold standard in trial design. However, phase II oncology trials with a binary outcome are often single-arm. Although a number of reasons exist for choosing a single-arm trial, the primary reason is that single-arm designs require fewer participants than their randomised equivalents. Therefore, the development of novel methodology that makes randomised designs more efficient is of value to the trials community. This article introduces a randomised two-arm binary outcome trial design that includes stochastic curtailment (SC), allowing for the possibility of stopping a trial before the final conclusions are known with certainty. In addition to SC, the proposed design involves the use of a randomised block design, which allows investigators to control the number of interim analyses. This approach is compared with existing designs that also use early stopping, through the use of a loss function comprised of a weighted sum of design characteristics. Comparisons are also made using an example from a real trial. The comparisons show that for many possible loss functions, the proposed design is superior to existing designs. Further, the proposed design may be more practical, by allowing a flexible number of interim analyses. One existing design produces superior design realisations when the anticipated response rate is low. However, when using this design, the probability of rejecting the null hypothesis is sensitive to misspecification of the null response rate. Therefore, when considering randomised designs in phase II, we recommend the proposed approach be preferred over other sequential designs.