Prediction intervals for growth curves

The growth curve model Y^n×p = A^{n×p ξ mtimes;k}B^k×p+ E^nxp, where Y is an observation matrix, &sigma is a matrix of unknown parameters, A is a known matrix of rank m, B is a known matrix of rank k with 1'= (1, …, 1) as its first row, and the rows of E are independent each distributed as N^p(0,Σ,) is considered. The problem of constructing the prediction intervals for future observations using the above model is considered and approximate intervals assuming different structures on σ are derived. The results are illustrated with several data sets.     

Exploratory factor and principal component analyses: some new aspects

Exploratory Factor Analysis (EFA) and Principal Component Analysis (PCA) are popular techniques for simplifying the presentation of, and investigating the structure of, an (n×p) data matrix. However, these fundamentally different techniques are frequently confused, and the differences between them are obscured, because they give similar results in some practical cases. We therefore investigate conditions under which they are expected to be close to each other, by considering EFA as a matrix decomposition so that it can be directly compared with the data matrix decomposition underlying PCA. Correspondingly, we propose an extended version of PCA, called the EFA-like PCA, which mimics the EFA matrix decomposition in the sense that they contain the same unknowns. We provide iterative algorithms for estimating the EFA-like PCA parameters, and derive conditions that have to be satisfied for the two techniques to give similar results. Throughout, we consider separately the cases n>p and p≥n. All derived algorithms and matrix conditions are illustrated on two data sets, one for each of these two cases.     

Inferences on the Coefficients of Variation in a Multivariate Normal Population

In this article, the problem of testing the equality of coefficients of variation in a multivariate normal population is considered, and an asymptotic approach and a generalized p-value approach based on the concepts of generalized test variable are proposed. Monte Carlo simulation studies show that the proposed generalized p-value test has good empirical sizes, and it is better than the asymptotic approach. In addition, the problem of hypothesis testing and confidence interval for the common coefficient variation of a multivariate normal population are considered, and a generalized p-value and a generalized confidence interval are proposed. Using Monte Carlo simulation, we find that the coverage probabilities and expected lengths of this generalized confidence interval are satisfactory, and the empirical sizes of the generalized p-value are close to nominal level. We illustrate our approaches using a real data.     

Projection Pursuit Through Relative Entropy Minimization

Projection Pursuit methodology permits to solve the difficult problem of finding an estimate of a density defined on a set of very large dimension. In his seminal article, “Projection Pursuit”, Huber (1985 Huber , P. ( 1985 ). Projection pursuit . The Annals of Statistics 13 ( 2 ): 435 – 525 With discussion .[Crossref], [Web of Science ®] , [Google Scholar]) evidenced the interest of the Projection Pursuit method thanks to the factorization of a density into a Gaussian component and some residual density in a context of Kullback–Leibler divergence maximisation.

In the present article, we introduce a new algorithm, and in particular, a test for the factorisation of a density estimated from an iid sample.     

Inferences on a linear combination of K multivariate normal mean vectors

In this paper, the hypothesis testing and confidence region construction for a linear combination of mean vectors for K independent multivariate normal populations are considered. A new generalized pivotal quantity and a new generalized test variable are derived based on the concepts of generalized p-values and generalized confidence regions. When only two populations are considered, our results are equivalent to those proposed by Gamage et al. [Generalized p-values and confidence regions for the multivariate Behrens–Fisher problem and MANOVA, J. Multivariate Aanal. 88 (2004), pp. 117–189] in the bivariate case, which is also known as the bivariate Behrens–Fisher problem. However, in some higher dimension cases, these two results are quite different. The generalized confidence region is illustrated with two numerical examples and the merits of the proposed method are numerically compared with those of the existing methods with respect to their expected areas, coverage probabilities under different scenarios.     

Deconvolution with supersmooth distributions

Nonparametric deconvolution problems require one to recover an unknown density when the data are contaminated with errors. Optimal global rates of convergence are found under the weighted L_p-loss (1 ≤ p ≤ ∞). It appears that the optimal rates of convergence are extremely low for supersmooth error distributions. To resolve this difficulty, we examine how high the noise level can be for deconvolution to be feasible, and for the deconvolution estimate to be as good as the ordinary density estimate. It is shown that if the noise level is not too high, nonparametric Gaussian deconvolution can still be practical. Several simulation studies are also presented.     

Comparison of exact tests for association in unordered contingency tables using standard,mid-p,and randomized test versions

Pearson’s chi-square (Pe), likelihood ratio (LR), and Fisher (Fi)–Freeman–Halton test statistics are commonly used to test the association of an unordered r×c contingency table. Asymptotically, these test statistics follow a chi-square distribution. For small sample cases, the asymptotic chi-square approximations are unreliable. Therefore, the exact p-value is frequently computed conditional on the row- and column-sums. One drawback of the exact p-value is that it is conservative. Different adjustments have been suggested, such as Lancaster’s mid-p version and randomized tests. In this paper, we have considered 3×2, 2×3, and 3×3 tables and compared the exact power and significance level of these test’s standard, mid-p, and randomized versions. The mid-p and randomized test versions have approximately the same power and higher power than that of the standard test versions. The mid-p type-I error probability seldom exceeds the nominal level. For a given set of parameters, the power of Pe, LR, and Fi differs approximately the same way for standard, mid-p, and randomized test versions. Although there is no general ranking of these tests, in some situations, especially when averaged over the parameter space, Pe and Fi have the same power and slightly higher power than LR. When the sample sizes (i.e., the row sums) are equal, the differences are small, otherwise the observed differences can be 10% or more. In some cases, perhaps characterized by poorly balanced designs, LR has the highest power.     

长株潭城市群水资源承载力的实证研究

在界定水资源承载力概念的基础上,构建了长株潭城市群水资源承载能力的指标体系,采用基于遗传算法的投影寻踪聚类模型对长株潭城市群水资源承载能力进行了实证分析,提出了提高长株潭城市群水资源承载能力水平的几点应对措施。     

A generalized p-value approach to inference on the performance measures of an M/Ek/1 queueing system

Abstract

The hypothesis tests of performance measures for an M/E_k/1 queueing system are considered. With pivotal models deduced from sufficient statistics for the unknown parameters, a generalized p-value approach to derive tests about parametric functions are proposed. The focus is on derivation of the p-values of hypothesis testing for five popular performance measures of the system in the steady state. Given a sample T, let p(T) be the p values we developed. We derive a closed form expression to show that, for small samples, the probability P(p(T) ? γ) is approximately equal to γ, for 0 ? γ ? 1.     

An efficient and fast algorithm for estimating the frequencies of superimposed exponential signals in zero-mean multiplicative and additive noise

In this paper, we consider the superimposed exponential signals in zero-mean multiplicative and additive noise when all the noise are independently and identically distributed. We use a three-step iterative procedure to estimate the frequencies of the considered model. It is observed that the estimators are consistent and work quite well in terms of biases and mean square errors. Moreover, the convergence rate of the estimators attains O _p (N ^?3/2), which is the best convergence rate in the case of only additive noise and constant amplitude.     

ESTIMATION OF REALIZED SIGNAL TO NOISE RATIO FOR A PAIR OF MULTIVARIATE SIGNALS

Consider the case of classifying an incoming message as one of two known p-dimension signals or as a pure noise. Let the noise co-variance matrix (assumed to be same in all the three cases) be unknown. We consider the problem of estimation of “realized signal to noise ratio matrix”, which is an index of discriminatory power, under various loss functions. Optimum estimators are obtained under these loss functions. Finally, an attempt is made to provide a lower confidence bound for the realized signal to noise ratio matrix. In the process, the probability distribution of the smaller eigenvalue of a 2 × 2 confluent hypergeometric random matrix is obtained.     

The p-values for one-sided hypothesis testing in univariate linear calibration

In this article, we focus on the one-sided hypothesis testing for the univariate linear calibration, where a normally distributed response variable and an explanatory variable are involved. The observations of the response variable corresponding to known values of the explanatory variable are used to make inferences on a single unknown value of the explanatory variable. We apply the generalized inference to the calibration problem, and take the generalized p-value as the test statistic to develop a new p-value for one-sided hypothesis testing, which we refer to as the one-sided posterior predictive p-value. The behavior of the one-sided posterior predictive p-value is numerically compared with that of the generalized p-value, and simulations show that the proposed p-value is quite satisfactory in the frequentist performance.     

Bayesian Analysis of Contingency Tables

ABSTRACT

The display of the data by means of contingency tables is used in different approaches to statistical inference, for example, to broach the test of homogeneity of independent multinomial distributions. We develop a Bayesian procedure to test simple null hypotheses versus bilateral alternatives in contingency tables. Given independent samples of two binomial distributions and taking a mixed prior distribution, we calculate the posterior probability that the proportion of successes in the first population is the same as in the second. This posterior probability is compared with the p-value of the classical method, obtaining a reconciliation between both results, classical and Bayesian. The obtained results are generalized for r × s tables.     

Assessing Occupational Exposure via the Unbalanced One-Way Random Effects Model

In this article, an unbalanced one-way random effects model is considered for the log-transformed shift-long exposure measurements. Exact test and confidence interval for the proportion of workers whose mean exposure exceeds the occupational exposure limit are developed based on the concepts of generalized p-value and generalized confidence interval. Some simulation results to compare the performance of the proposed test with that of the existing method are reported. The simulation results indicate that the proposed method appears to have significant gain in the size and power.     

Testing optimality of experimental designs for a regression model with random variables

Tsukanov (Theor. Probab. Appl. 26 (1981) 173–177) considers the regression model $\text{E(}\text{y}\text{|}\text{Z}\text{)=}\text{Fp}\text{+}\text{Zq}$, $\text{D(}\text{y}\text{|}\text{Z}\text{)=σ}{}^2\text{I}{}_{\mathrm{n}}$, where $\text{y}\text{(n×1)}$ is a vector of measured values,$\text{F}\text{(n×k)}$ contains the control variables, $\text{Z}\text{(n×l)}$ contains the observed values, and $\text{p}\text{(k×1)}$ and $\text{q}\text{(l×1)}$ are being estimated. Assuming that $\text{Z}\text{=}\text{FL}\text{+}\text{R}$, where $\text{L}\text{(k×l)}$ is non-random, and the rows of $\text{R}\text{(n×l)}$ are i.i.d. $\text{N(}\text{0}\text{,Σ)}$, we extend Tsukanov's results by (i) computing E(detH_p), where H_p is the covariance matrix of p?, the l.s.e. of p, (ii) considering ‘optimality in the mean’ for the largest root criterion, (iii) discussing these equations when the matrix R has a left-spherical distribution.     

A new generalized p-value approach for testing equality of coefficients of variation in k normal populations

A new generalized p-value method is proposed for testing the equality of coefficients of variation in k normal populations. Simulation studies show that the type I error probabilities are close to the nominal level. The proposed test is also compared with likelihood ratio test, modified Bennett's test and score test through Monte Carlo simulation, the results demonstrate that the generalized p-value method has satisfactory performance in terms of sizes and powers.     

Distribution of the Λ-Criterion for Sphericity Test and Its Connection to a Generalized Dirichlet Model

It is shown that the exact null distribution of the likelihood ratio criterion for sphericity test in the p-variate normal case and the marginal distribution of the first component of a (p ? 1)-variate generalized Dirichlet model with a given set of parameters are identical. The exact distribution of the likelihood ratio criterion so obtained has a general format for every p. A novel idea is introduced here through which the complicated exact null distribution of the sphericity test criterion in multivariate statistical analysis is converted into an easily tractable marginal density in a generalized Dirichlet model. It provides a direct and easiest method of computation of p-values. The computation of p-values and a table of critical points corresponding to p = 3 and 4 are also presented.     

Generalized inferences on the common mean vector of several multivariate normal populations

The hypothesis testing and confidence region are considered for the common mean vector of several multivariate normal populations when the covariance matrices are unknown and possibly unequal. A generalized confidence region is derived using the concepts of generalized method based on the generalized p$p$-value. The generalized confidence region is illustrated with two numerical examples. The merits of the proposed method are numerically compared with those of existing methods with respect to their expected area or expected d-dimensional volumes and coverage probabilities under different scenarios.     

Bivariate symmetry tests for complete and competing risks data: a saddlepoint approach

A class of bivariate symmetry tests for complete data and competing risks data is considered. Saddlepoint approximation for the exact p-values of the underlying permutation distribution of these tests is derived. Several simulation studies are conducted to evaluate the performance of the saddlepoint approximation and the asymptotic approximation. The saddlepoint approximation was found to be highly accurate and superior to the asymptotic approximations in replicating the exact permutation significance.     

Properties of a class of binary ARMA models

We investigate a class of ARMA-type models for stationary binary time series developed in [M. Kanter, Autoregression for discrete processes mod 2, J. Appl. Probabil. 12 (1975), pp. 371–375, E. McKenzie, Extending the correlation structure of exponential autoregressive-moving-average processes, J. Appl. Prob. 18 (1981), pp. 181–189.], which we shall refer to as BinARMA models. This sparsely parameterized model family is even able to deal with negative autocorrelations, which occur in language modelling, for instance. While the autocorrelation structure of the BinAR(p) models has been studied before in [M. Kanter, Autoregression for discrete processes mod 2, J. Appl. Probabil. 12 (1975), pp. 371–375], we shall present new results on the autocorrelation structure of general BinARMA models. These results simplify in the BinMA(q) case, while the known results concerning BinAR(p) models are included as a special case. A real-data example indicates possible fields of application of these models.