Asymptotic Comparison Between Constant-stress Testing and Step-stress Testing for Type-I Censored Data from Exponential Distribution

By running the life tests at higher stress levels than normal operating conditions, accelerated life testing quickly yields information on the lifetime distribution of a test unit. The lifetime at the design stress is then estimated through extrapolation using a regression model. In constant-stress testing, a unit is tested at a fixed stress level until failure or the termination time point of the test, while step-stress testing allows the experimenter to gradually increase the stress levels at some pre-fixed time points during the test. In this article, the optimal k-level constant-stress and step-stress accelerated life tests are compared for the exponential failure data under Type-I censoring. The objective is to quantify the advantage of using the step-stress testing relative to the constant-stress one. A log-linear relationship between the mean lifetime parameter and stress level is assumed and the cumulative exposure model holds for the effect of changing stress in step-stress testing. The optimal design point is then determined under C-optimality, D-optimality, and A-optimality criteria. The efficiency of step-stress testing compared to constant-stress testing is discussed in terms of the ratio of optimal objective functions based on the information matrix.     

A meta-analysis approach for step-stress experiments

The step-stress model is a special case of accelerated life testing that allows for testing of units under different levels of stress with changes occurring at various intermediate stages of the experiment. Interest then lies on inference for the mean lifetime at each stress level. All step-stress models discussed so far in the literature are based on a single experiment. For the situation when data have been collected from different experiments wherein all the test units had been exposed to the same levels of stress but with possibly different points of change of stress, we introduce a model that combines the different experiments and facilitates a meta-analysis for the estimation of the mean lifetimes. We then discuss in detail the likelihood inference for the case of simple step-stress experiments under exponentially distributed lifetimes with Type-II censoring.     

Optimal step-stress test under type I progressive group-censoring with random removals

Some traditional life tests result in no or very few failures by the end of test. In such cases, one approach is to do life testing at higher-than-usual stress conditions in order to obtain failures quickly. This paper discusses a k-level step-stress accelerated life test under type I progressive group-censoring with random removals. An exponential failure time distribution with mean life that is a log-linear function of stress and a cumulative exposure model are considered. We derive the maximum likelihood estimators of the model parameters and establish the asymptotic properties of the estimators. We investigate four selection criteria which enable us to obtain the optimum test plans. One is to minimize the asymptotic variance of the maximum likelihood estimator of the logarithm of the mean lifetime at use-condition, and the other three criteria are to maximize the determinant, trace and the smallest eigenvalue of Fisher's information matrix. Some numerical studies are discussed to illustrate the proposed criteria.     

Optimum M-step,step-stress design with K stress variables

Most of the available literature on accelerated life testing deals with tests that use only one accelerating variable and no other explanatory variables. Frequently, however, there is a need to use more than one accelerating or other experimental variables. Examples include a test of capacitors at higher than usual levels of temperature and voltage, and a test of circuit boards at higher than usual levels of temperature, humidity, and voltage. M-step, step-stress models are extended to include k stress variables. Optimum M-step, step-stress designs with k stress variables are found. The polynomial model is considered as a special case, and a lack of fit test is discussed. Also a goodness-of-fit test is proposed and the appropriateness of using its asymptotic chi-square distribution for small samples is shown.     

Optimum Design for Type-I Step-stress Accelerated Life Tests of Two-parameter Weibull Distributions

In this article, we focus on the general k-step step-stress accelerated life tests with Type-I censoring for two-parameter Weibull distributions based on the tampered failure rate (TFR) model. We get the optimum design for the tests under the criterion of the minimization of the asymptotic variance of the maximum likelihood estimate of the pth percentile of the lifetime under the normal operating conditions. Optimum test plans for the simple step-stress accelerated life tests under Type-I censoring are developed for the Weibull distribution and the exponential distribution in particular. Finally, an example is provided to illustrate the proposed design and a sensitivity analysis is conducted to investigate the robustness of the design.     

Lifetesting and estimation with arbitrary distribution function

We consider the problem of estimating the life–distribution F from censored lifetimes. The observation scheme is renewal testing over a long time horizon although the results can apply to survival testing with repetitions. We exhibit a product–limit estimator of F which is shown to be consistent and to converge weakly to a GAUSsian process. To do this we first extend these properties of the NELSON-AALEN martingale estimator to the family of PoissoN–type counting processes. Our proof of weak convergence is based on the general functional central limit theorems for semimartingales as developed by .JACOB, SHIRYAYEV and others     

Multiple step-stress accelerated life test: the tampered failure rate model

Battacharyya and Soejoeti (1989) proposed the tampered failure rate model for step-stress accelerated life testing. In this note, their model is generalized from the simple (2-step) step-stress setting to the multiple (k-step, k > 2) setting. For the parametric setting where the life distribution under constant stress is Weibull, maximum likelihood estimation is investigated and the situation where the different stress levels are equispaced is looked at.     

PREDICTION FOR EXPONENTIAL LIFETIMES BASED ON STEP-STRESS TESTING

ABSTRACT

This paper presents methods for constructing prediction limits for a step-stress model in accelerated life testing. An exponential life distribution with a mean that is a log-linear function of stress, and a cumulative exposure model are assumed. Two prediction problems are discussed. One concerns the prediction of the life at a design stress, and the other concerns the prediction of a future life during the step-stress testing. Both predictions require the knowledge of some model parameters. When estimates for the model parameters are available, a calibration method based on simulations is proposed for correcting the prediction intervals (regions) obtained by treating the parameter estimates as the true parameter values. Finally, a numerical example is given to illustrate the prediction procedure.     

A tampered Brownian motion process model for partial step-stress accelerated life testing

In partial step-stress accelerated life testing, models extrapolating data obtained under more severe conditions to infer the lifetime distribution under normal use conditions are needed. Bhattacharyya (Invited paper for 46th session of the ISI, 1987) proposed a tampered Brownian motion process model and later derived the probability distribution from a decay process perspective without linear assumption. In this paper, the model is described and the features of the failure time distribution are discussed. The maximum likelihood estimates of the parameters in the model and their asymptotic properties are presented. An application of models for step-stress accelerated life test to fields other than engineering is described and illustrated by applying the tampered Brownian motion process model to data taken from a clinical trial.     

On tests for normality of experimental error in ridge regression

Considered are tests for normality of the errors in ridge regression. If an intercept is included in the model, it is shown that test statistics based on the empirical distribution function of the ridge residuals have the same limiting distribution as in the one-sample test for normality with estimated mean and variance. The result holds with weak assumptions on the behavior of the independent variables; asymptotic normality of the ridge estimator is not required.     

Nonparametric estimation of the conditional distribution function in a semiparametric censorship model

In this paper we propose a new nonparametric estimator of the conditional distribution function under a semiparametric censorship model. We establish an asymptotic representation of the estimator as a sum of iid random variables, balanced by some kernel weights. This representation is used for obtaining large sample results such as the rate of uniform convergence of the estimator, or its limit distributional law. We prove that the new estimator outperforms the conditional Kaplan–Meier estimator for censored data, in the sense that it exhibits lower asymptotic variance. Illustration through real data analysis is provided.     

Estimation of the extended Weibull parameters and acceleration factors in the step-stress accelerated life tests under an adaptive progressively hybrid censoring data

ABSTRACT

Based on the tampered failure rate model under the adaptive Type-II progressively hybrid censoring data, we discuss the maximum likelihood estimators of the unknown parameters and acceleration factors in the general step-stress accelerated life tests in this paper. We also construct the exact and unique confidence interval for the extended Weibull shape parameter. In the numerical analysis, we describe the simulation procedures to obtain the adaptive Type-II progressively hybrid censoring data in the step-stress accelerated life tests and present an experimental data to illustrate the performance of the estimators.     

Testing Hypotheses for Variance Components in Mixed Linear Models

In the paper the problem of testing hypotheses for variance components in mixed linear models is considered. It is assumed that covariance matrices commute after using the usual invariance procedure with respect to the group of translations. The test for vanishing of single variance component is based on the locally best quadratic unbiased estimator of this component and rejects hypothesis if the ratio of positive and negative part of this estimator is sufficiently large. The power of this test with powers of other four tests for two-way classification models corresponding to block design is compared.     

Order restricted Bayesian inference for exponential simple step-stress model

A step-stress model has received a considerable amount of attention in recent years. In the usual step-stress experiment, a stress level is allowed to increase at each step to get rapid failure of the experimental units. The expected lifetime of the experimental unit is shortened as the stress level increases. Although extensive amount of work has been done on step-stress models, not enough attention has been paid to analyze step-stress models incorporating this information. We consider a simple step-stress model and provide Bayesian inference of the unknown parameters under cumulative exposure model assumption. It is assumed that the lifetime of the experimental units are exponentially distributed with different scale parameters at different stress levels. It is further assumed that the stress level increases at each step, hence the expected lifetime decreases. We try to incorporate this restriction using the prior assumptions. It is observed that different censoring schemes can be incorporated very easily under a general setup. Monte Carlo simulations have been performed to see the effectiveness of the proposed method, and two datasets have been analyzed for illustrative purposes.     

Multivariate portmanteau test for structural VARMA models with uncorrelated but non-independent error terms

We consider portmanteau tests for testing the adequacy of structural vector autoregressive moving-average (VARMA) models under the assumption that the errors are uncorrelated but not necessarily independent. The structural forms are mainly used in econometrics to introduce instantaneous relationships between economic variables. We first study the joint distribution of the quasi-maximum likelihood estimator (QMLE) and the noise empirical autocovariances. We then derive the asymptotic distribution of residual empirical autocovariances and autocorrelations under weak assumptions on the noise. We deduce the asymptotic distribution of the Ljung-Box (or Box-Pierce) portmanteau statistics in this framework. It is shown that the asymptotic distribution of the portmanteau tests is that of a weighted sum of independent chi-squared random variables, which can be quite different from the usual chi-squared approximation used under independent and identically distributed (iid) assumptions on the noise. Hence we propose a method to adjust the critical values of the portmanteau tests. Monte Carlo experiments illustrate the finite sample performance of the modified portmanteau test.     

Some nonparametric precedence-type tests based on progressively censored samples and evaluation of power

In this paper, we consider the problem of testing the equality of two distributions when both samples are progressively Type-II censored. We discuss the following two statistics: one based on the Wilcoxon-type rank-sum precedence test, and the second based on the Kaplan–Meier estimator of the cumulative distribution function. The exact null distributions of these test statistics are derived and are then used to generate critical values and the corresponding exact levels of significance for different combinations of sample sizes and progressive censoring schemes. We also discuss their non-null distributions under Lehmann alternatives. A power study of the proposed tests is carried out under Lehmann alternatives as well as under location-shift alternatives through Monte Carlo simulations. Through this power study, it is shown that the Wilcoxon-type rank-sum precedence test performs the best.     

Planning step-stress test under Type-I censoring for the exponential case

We consider in this work a k-level step-stress accelerated life-test (ALT) experiment with unequal duration steps τ=(τ₁, …, τ_k). Censoring is allowed only at the change-stress point in the final stage. An exponential failure time distribution with mean life that is a log-linear function of stress, along with a cumulative exposure model, is considered as the working model. The problem of choosing the optimal τ is addressed using the variance-optimality criterion. Under this setting, we then show that the optimal k-level step-stress ALT model with unequal duration steps reduces just to a 2-level step-stress ALT model.     

Maximum likelihood estimation of the parameters of a multiple step-stress model from the Birnbaum-Saunders distribution under time-constraint: A comparative study

The cumulative exposure model (CEM) is a commonly used statistical model utilized to analyze data from a step-stress accelerated life testing which is a special class of accelerated life testing (ALT). In practice, researchers conduct ALT to: (1) determine the effects of extreme levels of stress factors (e.g., temperature) on the life distribution, and (2) to gain information on the parameters of the life distribution more rapidly than under normal operating (or environmental) conditions. In literature, researchers assume that the CEM is from well-known distributions, such as the Weibull family. This study, on the other hand, considers a p-step-stress model with q stress factors from the two-parameter Birnbaum-Saunders distribution when there is a time constraint on the duration of the experiment. In this comparison paper, we consider different frameworks to numerically compute the point estimation for the unknown parameters of the CEM using the maximum likelihood theory. Each framework implements at least one optimization method; therefore, numerical examples and extensive Monte Carlo simulations are considered to compare and numerically examine the performance of the considered estimation frameworks.     

Bayesian analysis for step-stress accelerated life testing using weibull proportional hazard model

In this paper, we present a Bayesian analysis for the Weibull proportional hazard (PH) model used in step-stress accelerated life testings. The key mathematical and graphical difference between the Weibull cumulative exposure (CE) model and the PH model is illustrated. Compared with the CE model, the PH model provides more flexibility in fitting step-stress testing data and has the attractive mathematical properties of being desirable in the Bayesian framework. A Markov chain Monte Carlo algorithm with adaptive rejection sampling technique is used for posterior inference. We demonstrate the performance of this method on both simulated and real datasets.     

An efficient correction to the density-based empirical likelihood ratio goodness-of-fit test for the inverse Gaussian distribution

The inverse Gaussian (IG) distribution is widely used to model positively skewed data. An important issue is to develop a powerful goodness-of-fit test for the IG distribution. We propose and examine novel test statistics for testing the IG goodness of fit based on the density-based empirical likelihood (EL) ratio concept. To construct the test statistics, we use a new approach that employs a method of the minimization of the discrimination information loss estimator to minimize Kullback–Leibler type information. The proposed tests are shown to be consistent against wide classes of alternatives. We show that the density-based EL ratio tests are more powerful than the corresponding classical goodness-of-fit tests. The practical efficiency of the tests is illustrated by using real data examples.