Exposure Reconstruction for the TCDD-Exposed NIOSH Cohort Using a Concentration- and Age-Dependent Model of Elimination

Recent studies demonstrating a concentration dependence of elimination of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) suggest that previous estimates of exposure for occupationally exposed cohorts may have underestimated actual exposure, resulting in a potential overestimate of the carcinogenic potency of TCDD in humans based on the mortality data for these cohorts. Using a database on U.S. chemical manufacturing workers potentially exposed to TCDD compiled by the National Institute for Occupational Safety and Health (NIOSH), we evaluated the impact of using a concentration- and age-dependent elimination model (CADM) (Aylward et al., 2005) on estimates of serum lipid area under the curve (AUC) for the NIOSH cohort. These data were used previously by Steenland et al. (2001) in combination with a first-order elimination model with an 8.7-year half-life to estimate cumulative serum lipid concentration (equivalent to AUC) for these workers for use in cancer dose-response assessment. Serum lipid TCDD measurements taken in 1988 for a subset of the cohort were combined with the NIOSH job exposure matrix and work histories to estimate dose rates per unit of exposure score. We evaluated the effect of choices in regression model (regression on untransformed vs. ln-transformed data and inclusion of a nonzero regression intercept) as well as the impact of choices of elimination models and parameters on estimated AUCs for the cohort. Central estimates for dose rate parameters derived from the serum-sampled subcohort were applied with the elimination models to time-specific exposure scores for the entire cohort to generate AUC estimates for all cohort members. Use of the CADM resulted in improved model fits to the serum sampling data compared to the first-order models. Dose rates varied by a factor of 50 among different combinations of elimination model, parameter sets, and regression models. Use of a CADM results in increases of up to five-fold in AUC estimates for the more highly exposed members of the cohort compared to estimates obtained using the first-order model with 8.7-year half-life. This degree of variation in the AUC estimates for this cohort would affect substantially the cancer potency estimates derived from the mortality data from this cohort. Such variability and uncertainty in the reconstructed serum lipid AUC estimates for this cohort, depending on elimination model, parameter set, and regression model, have not been described previously and are critical components in evaluating the dose-response data from the occupationally exposed populations.     

Parameter Uncertainty and Variability In Evaluative Fate and Exposure Models

The human toxicity potential, a weighting scheme used to evaluate toxic emissions for life cycle assessment and toxics release inventories, is based on potential dose calculations and toxicity factors. This paper evaluates the variance in potential dose calculations that can be attributed to the uncertainty in chemical-specific input parameters as well as the variability in exposure factors and landscape parameters. A knowledge of the uncertainty allows us to assess the robustness of a decision based on the toxicity potential; a knowledge of the sources of uncertainty allows us to focus our resources if we want to reduce the uncertainty. The potential dose of 236 chemicals was assessed. The chemicals were grouped by dominant exposure route, and a Monte Carlo analysis was conducted for one representative chemical in each group. The variance is typically one to two orders of magnitude. For comparison, the point estimates in potential dose for 236 chemicals span ten orders of magnitude. Most of the variance in the potential dose is due to chemical-specific input parameters, especially half-lives, although exposure factors such as fish intake and the source of drinking water can be important for chemicals whose dominant exposure is through indirect routes. Landscape characteristics are generally of minor importance.     

Probabilistic Health Risk Assessment for Exposures to Estuary Sediments and Biota Contaminated with Polychlorinated Biphenyls, Polychlorinated Terphenyls and Other Toxic Substances

A Latin Hypercube probabilistic risk assessment methodology was employed in the assessment of health risks associated with exposures to contaminated sediment and biota in an estuary in the Tidewater region of Virginia. The primary contaminants were polychlorinated biphenyls (PCBs), polychlorinated terphenyls (PCTs), polynuclear aromatic hydrocarbons (PAHs), and metals released into the estuary from a storm sewer system. The exposure pathways associated with the highest contaminant intake and risks were dermal contact with contaminated sediment and ingestion of contaminated aquatic and terrestrial biota from the contaminated area. As expected, all of the output probability distributions of risk were highly skewed, and the ratios of the expected value (mean) to median risk estimates ranged from 1.4 to 14.8 for the various exposed populations. The 99th percentile risk estimates were as much as two orders of magnitude above the mean risk estimates. For the sediment exposure pathways, the stability of the median risk estimates was found to be much greater than the stability of the expected value risk estimates. The interrun variability in the median risk estimate was found to be +/-1.9% at 3000 iterations. The interrun stability of the mean risk estimates was found to be approximately equal to that of the 95th percentile estimates at any number of iterations. The variation in neither contaminant concentrations nor any other single input variable contributed disproportionately to the overall simulation variance. The inclusion or exclusion of spatial correlations among contaminant concentrations in the simulation model did not significantly effect either the magnitude or the variance of the simulation risk estimates for sediment exposures.     

Integration of Probabilistic Exposure Assessment and Probabilistic Hazard Characterization

A method is proposed for integrated probabilistic risk assessment where exposure assessment and hazard characterization are both included in a probabilistic way. The aim is to specify the probability that a random individual from a defined (sub)population will have an exposure high enough to cause a particular health effect of a predefined magnitude, the critical effect size ( CES ). The exposure level that results in exactly that CES in a particular person is that person's individual critical effect dose ( ICED ). Individuals in a population typically show variation, both in their individual exposure ( IEXP ) and in their ICED . Both the variation in IEXP and the variation in ICED are quantified in the form of probability distributions. Assuming independence between both distributions, they are combined (by Monte Carlo) into a distribution of the individual margin of exposure ( IMoE ). The proportion of the IMoE distribution below unity is the probability of critical exposure ( PoCE ) in the particular (sub)population. Uncertainties involved in the overall risk assessment (i.e., both regarding exposure and effect assessment) are quantified using Monte Carlo and bootstrap methods. This results in an uncertainty distribution for any statistic of interest, such as the probability of critical exposure ( PoCE ). The method is illustrated based on data for the case of dietary exposure to the organophosphate acephate. We present plots that concisely summarize the probabilistic results, retaining the distinction between variability and uncertainty. We show how the relative contributions from the various sources of uncertainty involved may be quantified.     

Diesel Emissions and Lung Cancer1

This paper uses two different methods to assess the potential risk of human lung cancer from exposure to diesel engine emissions. One method analyzes the best available epidemiological evidence on the lung cancer risks of persons exposed in their occupations to diesel engine emissions. The second conducts a comparative analysis of laboratory and epidemiological data on diesel engine emissions and two chemically related environmental exposures–coke oven emissions and roofing tar emissions. The estimates of potential risk derived from these two distinct methods are compared. The sources of uncertainty in each method are explicitly characterized. The value of these estimates for comparing the potential lung cancer risks from exposure to diesel engine emissions with other personal and societal risks are discussed. Also considered are the limitations of these results in predicting the possible excess incidence of lung cancer from ambient exposure to diesel emissions.     

A Systematic Uncertainty Analysis of an Evaluative Fate and Exposure Model

Multimedia fate and exposure models are widely used to regulate the release of toxic chemicals, to set cleanup standards for contaminated sites, and to evaluate emissions in life-cycle assessment. CalTOX, one of these models, is used to calculate the potential dose, an outcome that is combined with the toxicity of the chemical to determine the Human Toxicity Potential (HTP), used to aggregate and compare emissions. The comprehensive assessment of the uncertainty in the potential dose calculation in this article serves to provide the information necessary to evaluate the reliability of decisions based on the HTP A framework for uncertainty analysis in multimedia risk assessment is proposed and evaluated with four types of uncertainty. Parameter uncertainty is assessed through Monte Carlo analysis. The variability in landscape parameters is assessed through a comparison of potential dose calculations for different regions in the United States. Decision rule uncertainty is explored through a comparison of the HTP values under open and closed system boundaries. Model uncertainty is evaluated through two case studies, one using alternative formulations for calculating the plant concentration and the other testing the steady state assumption for wet deposition. This investigation shows that steady state conditions for the removal of chemicals from the atmosphere are not appropriate and result in an underestimate of the potential dose for 25% of the 336 chemicals evaluated.     

Distribution of Exposure Concentrations and Doses for Constituents of Environmental Tobacco Smoke

The ultimate goal of the research reported in this series of three articles is to derive distributions of doses of selected environmental tobacco smoke (ETS)-related chemicals for nonsmoking workers. This analysis uses data from the 16-City Study collected with personal monitors over the course of one workday in workplaces where smoking occurred. In this article, we describe distributions of ETS chemical concentrations and the characteristics of those distributions (e.g., whether the distribution was log normal for a given constituent) for the workplace exposure. Next, we present population parameters relevant for estimating dose distributions and the methods used for estimating those dose distributions. Finally, we derive distributions of doses of selected ETS-related constituents obtained in the workplace for people in smoking work environments. Estimating dose distributions provided information beyond the usual point estimate of dose and showed that the preponderance of individuals exposed to ETS in the workplace were exposed at the low end of the dose distribution curve. The results of this analysis include estimations of hourly maxima and time-weighted average (TWA) doses of nicotine from workplace exposures to ETS (extrapolated from 1 day to 1 week) and doses derived from modeled lung burdens of ultraviolet-absorbing particulate matter (UVPM) and solanesol resulting from workplace exposures to ETS (extrapolated from 1 day to 1 year).     

Regulating Under Uncertainty: Newsboy for Exposure Limits

Setting action levels or limits for health protection is complicated by uncertainty in the dose-response relation across a range of hazards and exposures. To address this issue, we consider the classic newsboy problem. The principles used to manage uncertainty for that case are applied to two stylized exposure examples, one for high dose and high dose rate radiation and the other for ammonia. Both incorporate expert judgment on uncertainty quantification in the dose-response relationship. The mathematical technique of probabilistic inversion also plays a key role. We propose a coupled approach, whereby scientists quantify the dose-response uncertainty using techniques such as structured expert judgment with performance weights and probabilistic inversion, and stakeholders quantify associated loss rates.     

Effects of Uncertainties on Exposure Estimates to Methylmercury: A Monte Carlo Analysis of Exposure Biomarkers versus Dietary Recall Estimation

This article presents a general model for estimating population heterogeneity and "lack of knowledge" uncertainty in methylmercury (MeHg) exposure assessments using two-dimensional Monte Carlo analysis. Using data from fish-consuming populations in Bangladesh, Brazil, Sweden, and the United Kingdom, predictive model estimates of dietary MeHg exposures were compared against those derived from biomarkers (i.e., [Hg]hair and [Hg]blood). By disaggregating parameter uncertainty into components (i.e., population heterogeneity, measurement error, recall error, and sampling error) estimates were obtained of the contribution of each component to the overall uncertainty. Steady-state diet:hair and diet:blood MeHg exposure ratios were estimated for each population and were used to develop distributions useful for conducting biomarker-based probabilistic assessments of MeHg exposure. The 5th and 95th percentile modeled MeHg exposure estimates around mean population exposure from each of the four study populations are presented to demonstrate lack of knowledge uncertainty about a best estimate for a true mean. Results from a U.K. study population showed that a predictive dietary model resulted in a 74% lower lack of knowledge uncertainty around a central mean estimate relative to a hair biomarker model, and also in a 31% lower lack of knowledge uncertainty around central mean estimate relative to a blood biomarker model. Similar results were obtained for the Brazil and Bangladesh populations. Such analyses, used here to evaluate alternative models of dietary MeHg exposure, can be used to refine exposure instruments, improve information used in site management and remediation decision making, and identify sources of uncertainty in risk estimates.     

An Analysis of the Uncertainties in Estimates of Radon-Induced Lung Cancer

A recent report by the National Academy of Sciences estimates that the radiation dose to the bronchial epithelium, per working level month (WLM) of radon daughter exposure, is about 30% lower for residential exposures than for exposures received in underground mines. Adjusting the previously published BEIR IV radon risk model accordingly, the unit risk for indoor exposures of the general population is about 2.2 x 10(-4) lung cancer deaths (lcd)/WLM. Using results from EPA's National Residential Radon Survey, the average radon level is estimated to be about 1.25 pCi/L, and the annual average exposure about 0.242 WLM. Based on these estimates, 13,600 radon-induced lcd/yr are projected for the United States. A quantitative uncertainty analysis was performed, which considers: statistical uncertainties in the epidemiological studies of radon-exposed miners; the dependence of risk on age at, and time since, exposure; the extrapolation of risk estimates from mines to homes based on comparative dosimetry; and uncertainties in the radon daughter levels in homes and in the average residential occupancy. Based on this assessment of the uncertainties in the unit risk and exposure estimates, an uncertainty range of 7000-30000 lcd/yr is derived.     

Determination of Less-Than-Lifetime Exposures to Point Source Emissions

This paper presents a method of estimating long-term exposures to point source emissions. The method consists of a Monte Carlo exposure model (PSEM or Point Source Exposure Model) that combines data on population mobility and mortality with information on daily activity patterns. The approach behind the model can be applied to a wide variety of exposure scenarios. In this paper, PSEM is used to characterize the range and distribution of lifetime equivalent doses received by inhalation of air contaminated by the emissions of a point source. The output of the model provides quantitative information on the dose, age, and gender of highly exposed individuals. The model is then used in an example risk assessment. Finally, future uses of the model's approach are discussed.     

Methods to Explore Uncertainty and Bias Introduced by Job Exposure Matrices

Job exposure matrices (JEMs) are used to measure exposures based on information about particular jobs and tasks. JEMs are especially useful when individual exposure data cannot be obtained. Nonetheless, there may be other workplace exposures associated with the study disease that are not measured in available JEMs. When these exposures are also associated with the exposures measured in the JEM, biases due to uncontrolled confounding will be introduced. Furthermore, individual exposures differ from JEM measurements due to differences in job conditions and worker practices. Uncertainty may also be present at the assessor level since exposure information for each job may be imprecise or incomplete. Assigning individuals a fixed exposure determined by the JEM ignores these uncertainty sources. We examine the uncertainty displayed by bias analyses in a study of occupational electric shocks, occupational magnetic fields, and amyotrophic lateral sclerosis.     

Health Risk Assessment for Planned Waste Incinerators: Getting the Right Science and the Science Right

Health risk assessment is widely advocated in the United Kingdom as the most comprehensive means of assessing the health risks posed by the emissions of a planned waste incinerator. Its main advantage over other methods of assessment, such as air quality impact assessment, is its ability to address explicitly the direct (inhalation) and indirect (ingestion and dermal contact) health risks posed by different chemicals, including those that are not thought to have a threshold below which no adverse effect will take place. This article examines the level and quality of the emissions assessments included in 61 waste incinerator environmental statements (ESs); in particular, it focuses on the quality of the exposure assessment and risk characterization stages of the health risk assessment process. The article concludes that the ES has not always provided interested stakeholders with the best available information upon which to determine the tolerability of the health risks posed by waste incinerator emissions Some recommendations are made as to how this problem might be addressed in future environmental impact assessment (EIA) processes.     

Environmental Exposure of the Adult French Population to Permethrin

This work aims to assess the exposure to permethrin of the adult French population from available contamination measurements of outdoor air, indoor air, and settled dust. Priority is given to the assessment of chronic exposure, given the potential of permethrin to induce cancers and/or endocrine disorders. A statistical method was devised to calculate exposure to permethrin by different pathways (inhalation, indirect dust ingestion, and dermal contact). This method considers anthropometric parameters, the population's space–time budget, and recent methods for calculating dermal exposure. Considering the media of interest, our results pointed to house dust as the main environmental source of permethrin exposure, followed by indoor and outdoor air. Dermal contact and indirect dust ingestion may be more important exposure pathways than inhalation. A sensitivity analysis indicated that exposure estimates were mainly affected by variability within contamination data. This study is the first step in aggregated exposure and risk assessment due to pyrethroid exposure. Outdoor air, indoor air, and settled dust may constitute significant exposure sources, in addition to diet, which could be important. The next step entails assessing internal doses and estimating the proportion of each exposure source and pathway relative to internal exposure.     

Issues Related to Time Averaging of Exposure in Modeling Risks Associated with Intermittent Exposures to Lead

Typical exposures to lead often involve a mix of long-term exposures to relatively constant exposure levels (e.g., residential yard soil and indoor dust) and highly intermittent exposures at other locations (e.g., seasonal recreational visits to a park). These types of exposures can be expected to result in blood lead concentrations that vary on a temporal scale with the intermittent exposure pattern. Prediction of short-term (or seasonal) blood lead concentrations arising from highly variable intermittent exposures requires a model that can reliably simulate lead exposures and biokinetics on a temporal scale that matches that of the exposure events of interest. If exposure model averaging times (EMATs) of the model exceed the shortest exposure duration that characterizes the intermittent exposure, uncertainties will be introduced into risk estimates because the exposure concentration used as input to the model must be time averaged to account for the intermittent nature of the exposure. We have used simulation as a means of determining the potential magnitude of these uncertainties. Simulations using models having various EMATs have allowed exploration of the strengths and weaknesses of various approaches to time averaging of exposures and impact on risk estimates associated with intermittent exposures to lead in soil. The International Commission of Radiological Protection (ICRP) model of lead pharmacokinetics in humans simulates lead intakes that can vary in intensity over time spans as small as one day, allowing for the simulation of intermittent exposures to lead as a series of discrete daily exposure events. The ICRP model was used to compare the outcomes (blood lead concentration) of various time-averaging adjustments for approximating the time-averaged intake of lead associated with various intermittent exposure patterns. Results of these analyses suggest that standard approaches to time averaging (e.g., U.S. EPA) that estimate the long-term daily exposure concentration can, in some cases, result in substantial underprediction of short-term variations in blood lead concentrations when used in models that operate with EMATs exceeding the shortest exposure duration that characterizes the intermittent exposure. Alternative time-averaging approaches recommended for use in lead risk assessment more reliably predict short-term periodic (e.g., seasonal) elevations in blood lead concentration that might result from intermittent exposures. In general, risk estimates will be improved by simulation on shorter time scales that more closely approximate the actual temporal dynamics of the exposure.     

Projections of Cancer Risks Attributable to Future Exposure to Asbestos

To assess the maximum possible impact of further government regulation of asbestos exposure, projections were made of the use of asbestos in nine product categories for the years 1985-2000. A life table risk assessment model was then developed to estimate the excess cases of cancer and lost person-years of life likely to occur among those occupationally and nonoccupationally exposed to the nine asbestos product categories manufactured in 1985-2000. These estimates were made under the assumption that government regulation remains at its 1985 level. Use of asbestos in the nine product categories was predicted to decline in all cases except for friction products. The risk assessment results show that, although the cancer risks from future exposure to asbestos are significantly less than those from past exposures, in the absence of more stringent regulations, a health risk remains.     

Consideration of Background Exposures in the Management of Hazardous Waste Sites: A New Approach to Risk Assessment

The current approach to health risk assessment of toxic waste sites in the U.S. may lead to considerable expenditure of resources without any meaningful reduction in population exposure. Risk assessment methods used generally ignore background exposures and consider only incremental risk estimates for maximally exposed individuals. Such risk estimates do not address true public health risks to which background exposures also contribute. The purpose of this paper is to recommend a new approach to risk assessment and risk management concerning toxic waste sites. Under this new approach, which we have called public health risk assessment, chemical substances would be classified into a level of concern based on the potential health risks associated with typical national and regional background exposures. Site assessment would then be based on the level of concern for the particular pollutants involved and the potential contribution of site contaminants to typical background human exposures. While various problems can be foreseen with this approach, the key advantage is that resources would be allocated to reduce the most important sources of human exposure, and site remediation decisions could be simplified by focussing on exposure assessment rather than questionable risk extrapolations.     

A Bayesian Model and Stochastic Exposure (Dose) Estimation for Relative Exposure Risk Comparison Involving Asbestos‐Containing Dropped Ceiling Panel Installation and Maintenance Tasks

Assessing exposures to hazards in order to characterize risk is at the core of occupational hygiene. Our study examined dropped ceiling systems commonly used in schools and commercial buildings and lay‐in ceiling panels that may have contained asbestos prior to the mid to late 1970s. However, most ceiling panels and tiles do not contain asbestos. Since asbestos risk relates to dose, we estimated the distribution of eight‐hour TWA concentrations and one‐year exposures (a one‐year dose equivalent) to asbestos fibers (asbestos f/cc‐years) for five groups of workers who may encounter dropped ceilings: specialists, generalists, maintenance workers, nonprofessional do‐it‐yourself (DIY) persons, and other tradespersons who are bystanders to ceiling work. Concentration data (asbestos f/cc) were obtained through two exposure assessment studies in the field and one chamber study. Bayesian and stochastic models were applied to estimate distributions of eight‐hour TWAs and annual exposures (dose). The eight‐hour TWAs for all work categories were below current and historic occupational exposure limits (OELs). Exposures to asbestos fibers from dropped ceiling work would be categorized as “highly controlled” for maintenance workers and “well controlled” for remaining work categories, according to the American Industrial Hygiene Association exposure control rating system. Annual exposures (dose) were found to be greatest for specialists, followed by maintenance workers, generalists, bystanders, and DIY. On a comparative basis, modeled dose and thus risk from dropped ceilings for all work categories were orders of magnitude lower than published exposures for other sources of banned friable asbestos‐containing building material commonly encountered in construction trades.     

Cancer Risk Assessment with Intermittent Exposure

Applications of methods for carcinogenic risk assessment often focus on estimating lifetime cancer risk. With intermittent or time-dependent exposures, lifetime risk is often approximated on the basis of a lifetime average daily dose (LADD). In this article, we show that there exists a lifetime equivalent constant dose (LECD) which leads to the same lifetime risk as the actual time-dependent exposure pattern. The ratio C = LECD/LADD then provides a measure of accuracy of risk estimates based on the LADD, as well as a basis for correcting such estimates. Theoretical results derived under the classical multistage model and the two-stage birth-death-mutation model suggest that the maximum value of C, which represents the factor by which the LADD may lead to underestimates of risk, will often lie in the range of 2- to 5-fold. The practical application of these results is illustrated in the case of astronauts subjected to relatively short-term exposure to volatile organics in a closed space station environment, and in the case of the ingestion of pesticide residues in food where consumption patterns vary with age.